1282A725Q0036_Spec Table_Utility Truck Bed_WA.pdf
PDF 137 KB Posted
- Attached to
- Steel Utility Truck Bed Purchase & Install
- Solicitation number
- 1282A725Q0036
- Issued by
-
Department of Agriculture Forest Service
About this file
This document is a detailed specification table for a Steel Utility Truck Bed, specifically designed for a 2024 Chevy K5500 Dually truck. The specifications cover multiple aspects of the truck bed, including jack and coupler features, structural components, exterior design, and safety/electrical requirements. Key features include a 30K hitch with turnover ball, steel tube headache rack, 1/8" treadplate deck, 4" structural channel steel frame rails, solid rear skirt with step, utility and chain boxes, steel radius fenders, side steps, airline track tiedowns, attachment rings, work lights, toolboxes, and an inverter installation for an air compressor. The specification table is set up to allow vendors to confirm whether they can meet each required specification, with columns for detailed requirements across structural, exterior, and electrical categories.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Required Specifications Meets Spec (Yes/No)
Jack and Coupler Features 30K Hitch with turnover ball (2 5/16” gooseneck ball) 24K 2 ½” BP Hitch w/ Receiver Tube
Structural Features
9'4” CAB & CHASSIS
Fits a 2024 Chevy K5500 Dually Steel Tube Headache Rack 1/8" Treadplate Deck 4" Structural Channel Steel Frame Rails 3" x 3/16" Channel Crossmembers 3/16” Deck
Exterior Features Solid One-Piece Rear Skirt w/ Rear Step Steel Light Box Utility Box in Front, Top-open 3/4 Length Shovel Box Low-Profile Chain Box in Rear Steel Radius Fenders Sidesteps in Front & Behind Fenders Sidesteps in Front & Behind Fenders
(4) 18" Airline Track Tiedowns (4-6) Attachment Rings Include Work lights Must include toolboxes all around Install inverter for air compressor (inverter will be provided)
Safety Convenience and Electrical Insulated Wire Harness DOT Approved Lighting LED Lighting 12V Round 7 Pin in GN Box Round 7 Pin/4 Way Flat on Rear
Additional Information Estimated lead time for completion of installation After Receipt of Order (ARO)?
Address of location where product would be installed?
| Sources Sought Notice |
| This is a Sources Sought Notice and is NOT a Request for Quotation (RFQ). This notice is for informational and planning purposes and is not considered a commitment by the Government. The Government does not intend to award a contract on the basis of t... |
| The Government is requesting information from interested vendors who can provide a product that meets the specifications in this notice. Information is requested by Tuesday, March 31, 1700 (5:00PM) Eastern Time, to Megan Allaire, megan.allaire@usda.gov. |
| Description of Requirement: |
| Vendor Socio-Economic Status: __________________________________ |
| Point of Contact (POC): __________________________ POC Phone Number: ______________ |
| POC Email: __________________________ |
| Product Brand: __________________________ Model Number: ______________ |
| 30K Hitch with turnover ball 2 516 gooseneck ball: |
| 24K 2 ½ BP Hitch w Receiver Tube: |
| 9 4 CAB CHASSIS: |
| Fits a 2024 Chevy K5500 Dually: |
| Steel Tube Headache Rack: |
| 18 Treadplate Deck: |
| 4 Structural Channel Steel Frame Rails: |
| 3 x 316 Channel Crossmembers: |
| 316 Deck: |
| Solid OnePiece Rear Skirt w Rear Step: |
| Steel Light Box: |
| Utility Box in Front Topopen 34 Length Shovel Box: |
| LowProfile Chain Box in Rear: |
| Steel Radius Fenders: |
| Sidesteps in Front Behind Fenders: |
| Sidesteps in Front Behind Fenders_2: |
| 4 18 Airline Track Tiedowns: |
| 46 Attachment Rings: |
| Include Work lights: |
| Must include toolboxes all around: |
| Install inverter for air compressor inverter will be provided: |
| Insulated Wire Harness: |
| DOT Approved Lighting: |
| LED Lighting: |
| 12V Round 7 Pin in GN Box: |
| Round 7 Pin4 Way Flat on Rear: |
| Estimated lead time for completion of installation After Receipt of Order ARORow1: |
| Address of location where product would be installedRow1: |
File details come from the government source that posted it. Updated .