1282A725Q0036_Spec Table_Utility Truck Bed_WA_rev1.pdf
PDF 127 KB Posted
- Attached to
- Steel Utility Truck Bed Purchase & Install
- Solicitation number
- 1282A725Q0036
- Issued by
-
Department of Agriculture Forest Service
About this file
The document is a specifications table for a utility truck bed, detailing precise requirements for a vehicle modification project for the Department of Agriculture Forest Service. The specifications cover three primary categories: Jack and Coupler Features, Structural Features, and Exterior Features for a 2024 Chevy K5500 Dually truck. Key technical requirements include a 30K hitch with turnover ball, 9'4" chassis frame, steel tube headache rack, 4" structural channel steel frame rails, a solid one-piece rear skirt with rear step, steel light box, shovel box, chain box, steel radius fenders, six 5/8" D-rings, two work lights, and an inverter installation for an air compressor. Additional specifications encompass safety and electrical components such as an insulated wire harness, DOT-approved LED lighting, and 12V round pin connections. The document is part of solicitation 1282A725Q0036 for a Steel Utility Truck Bed Purchase & Install project located at Fort Simcoe Job Corps Civilian Conservation Center in White Swan, Washington.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1282A725Q0036_Spec Table_Utility Truck Bed_WA_rev1
Required Specifications Meets Spec (Yes/No)
Jack and Coupler Features 30K Hitch with turnover ball (2 5/16” gooseneck ball) 24K 2 ½” BP Hitch w/ Receiver Tube
Structural Features 9'4” Chassis Frame Fits a 2024 Chevy K5500 Dually Steel Tube Headache Rack 4" Structural Channel Steel Frame Rails 3" x 3/16" Channel Crossmembers 3/16” Deck
Exterior Features Solid One-Piece Rear Skirt w/ Rear Step Steel Light Box Shovel Box: Top-open, Internal, Standard Length, Chain Box in Rear, Low-Profile, Below Deck Steel Radius Fenders
(6) D-Rings, 5/8” (6,000lbs)
(2) Work lights
Install inverter for air compressor (Slim Line 2000-Watt Inverter will be provided)
Safety Convenience and Electrical Insulated Wire Harness DOT Approved Lighting LED Lighting 12V Round 7 Pin in GN Box Round 7 Pin/4 Way Flat on Rear
Additional Information Estimated lead time for completion of installation After Receipt of Order (ARO)?
Address of location where product would be installed?
File details come from the government source that posted it. Updated .