Amendment2.pdf

(x)

1240BH21R0023

x x copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

40BH

PORTLAND OR 97204-2829

STE 310

1220 SW 3RD AVE

USDA-FS CSA NORTHWEST 6

06/07/20210002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

05/11/2021

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

See attached.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

DARCY J. RAPOZA

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

1. Specification 07 46 23, Part 2 Products, 2.01 Siding, B. Batten Strips, is corrected to read 1 x 3 inch, rather than 1 x 4 inch.

2. The following answers are provided to submitted questions:

Q: Building 2101 wall C item 07462 has language in there about replacing brick molding around windows to material consistent with remainder of building. It appears that windows already have brick molding consistent with remainder of building and brick molding is in good shape. We’re assuming if items are in good shape as determined by COR then we won’t need to replace items and that this will be consistent with most of the work items?

A: Correct

Q: Spec section 074623 calls for battens to be 1x4 and all existing battens are 1x3. Should we figure on matching spec or match existing?

A: 1”x3” battens is the correct size, Spec Section 07 46 23 will be revised to indicate 1”x3” battens.

Q: Addendum 1 response had an answer to a question on the boarded-up windows that stated the boarded-up windows needed to be restored with glass. On page 3 of the drawings, item 06204 describes the work associated with the boarded-up windows. A similar description is given in spec section 062000. From the description it appears that we are to leave plywood in the opening, install wood trim, mullions, etc. to match existing windows on site and then paint the entire assembly to ‘resemble a multi-light window’. Can you please confirm if we are to restore these windows with glazing or restore per note 06204 on page 3 of the drawings? If it’s per 06204, is one solid color in the multi-light section acceptable or does some sort of scene or other scheme need to be painted in those ‘window’ sections?

A: Restore per note 06204, with one solid color to ‘resemble a multi-light window’

Q: Please clarify the term putty stops as used in item 06202 for wall L on building 2101.

A: Putty Stops – Term is being used as the Window Grill or divider for the individual glass panes of each window.

1240BH21R0023

Amendment 2