SOW_-_Freestanding_facility_sign.pdf
PDF 141 KB Posted
- Attached to
- Replace Sign
- Solicitation number
- 1232SD18R0022
About this file
SOW - Freestanding facility sign
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 1232SD18R0022_Amd_0003.pdf | ||
| Aerial_view_of_parking_lot20180703.pdf | ||
| 1232SD18R0022_Amd_0002.pdf | ||
| 1232SD18R0022_Amd_0001.pdf | ||
| Outdoor_Sign_Mockup_Final.pdf | ||
| RFI_FORM.DOCX | DOCX document | |
| Calculation_of_Self_Performed_Work.xlsx | XLSX spreadsheet | |
| Past_Performance_Capability_Information.docx | DOCX document | |
| ars372.pdf | ||
| ars371.pdf | ||
| Contractor_Certification_Regarding_EMR.pdf | ||
| Current_CGPRS_Sign.jpg | JPG image | |
| 1232SD18R0022.pdf | ||
| Wage_Determination_CO180011_03-02-2018_CO11.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
Construction of new free-standing outdoor sign
PROJECT REQUIREMENTS:
A. The CONTRACTOR shall remove existing sign and prepare the area for the installation of the new sign.
B. The CONTRACTOR shall manufacture and install a double sided 10’ x 16’ metal freestanding sign in the same location of current sign and utilize the existing concrete pad.
• Sign shall be designed and constructed according to Department Manual (DM) regulations and approved mock up design. (see below photo)
• The CONTRACTOR shall provide a mock up for approval before moving forward with manufacturing the actual sign.
C. The CONTRACTOR shall provide and attach a double sided programmable light-emitting diode (LED) 12” x 173” digital sign on the top of the new sign.
• LED Display with remote and the capability to upgrade to Direct Ethernet Connection with
Category 5 (CAT5) Cable if need be. Provide any necessary software for controlling digital sign.
• There will not be any communication cable installed at this point.
• The CONTRACTOR shall provide electrical power to the new sign. There is a light pole approximately 5 yards to the north of the sign as a possible power source. (See below photo)
D. The CONTRACTOR shall provide two brick pillars to be constructed on both sides of sign
• Pillars shall not be larger than 24” wide and 120” high.
Potential power source for sign.
File details come from the government source that posted it.