Attachment 3- Statement of Work.doc

Statement of Work Document

Repair a 2006 International Silage/Grain Truck #12

1.0 Background and Purpose:

Scientists at the Roman L. Hurska U.S. Meat Animal Research Center (USMARC) are developing scientific information and new technologies to solve high priority problems for the U.S. beef, swine, and sheep industries. As part of the effort, they require the repair of a 2006 International silage/grain truck for the use in the farming operation which works to feed the animal population of USMARC.

CONTRACTOR REQUIREMENTS

2.0 Technical Requirements/Tasks:

· The Contractor shall provide all tools, equipment, parts, and labor to perform the work as herein specified for the truck.

· The Repair of one silage/grain truck per the bid schedules listed below.

· Contactor shall be in touch with Government Point of Contact to schedule a time to conduct work.

· Working hours shall be in the time frame of 7:00 am- 3:00 pm on the dates discussed with the Government Point of Contact.

· If components not listed in bid schedule are found to be defective, they shall be brought to the attention of the Government Point of Contact and the contracting specialist immediately.

· Contractor shall operate truck at normal operating speed to ensure proper operation of the truck for acceptance of work.

BID SCHEDULE

Replace one 7092372C94 Engine Overhaul Kit

Replace ten quarts 15-40 Engine Oil

Replace one 1841331C95 Camshaft, Brake

Replace one 1836235C1 Gasket Air Compressor

Replace four 1844447C1 Ring-O #214

Replace one 1842124C91 Gasket, Kit Oil Cooler Module S

Replace one 1836005C1 Gasket High Pressure Pump

Replace one 1812559C1 Seal Oil Dipstick Tube

Replace one 1820287C1 bolt

Replace one 40055R1 bolt M20 X 70 12PT

Replace one 1833096C95 front oil seal kit

Replace one 591597C2 Gasket Pump P/S

Replace one 1841938C1 rear crankshaft seal

Replace one 1842588C93 kit EGR cooler seal cooler

Replace one 1842350C1 Gasket EGR valve to inlet duct

Replace one 1842351C1 gasket EGR tube to EGR valve

Replace one 1842130C3 thermostat assembly

Replace one CP550657 fuel filter

Replace one CP552025 oil filter

Replace one CP606503 air filter

Replace ten SLO 550041810 Red 50/50 antifreeze

Replace one 1841018C2 gasket FC half oil

Replace one 1841018C1 gasket FC front half (coolant)

Replace one 1820907C2 ring O #118

Replace one 1842564C93 oil pump kit

Replace twelve 1893783C5 assembly push I6 rod

Replace one 1841820C1 camshaft gear

Replace twelve 1850160C3 toller tappet assy

Replace one 1842730C3 seal, ring camshaft, rear, 02/

Replace eleven Bolt prev torque m12x1.75x40mm

Replace one refab head

Replace six 1823356C92 shim, cylinder liner, sleeve K

Replace one 1875869C92 bearing, kit camshaft bearing 1

Any additional parts needed to repair truck

Freight for any parts shipped to location of repair, FOB Destination

Labor for repairs

3.0 Deliverable/Schedule/Address:

· Period of Performance:

Work must be completed by March 15, 2026

· Place of Performance:

USMARC

844 Road 313

Clay Center, NE 68933

4.0 Performance Requirement Measures:

A one-time repair of a 2006 International silage/grain truck within the expected time frame.

5.0 Government Point of Contact:

Mike Menke, Phone (402)746-4775, mike.menke@usda.gov or Rob Bourg, rob.bourg@usda.gov