12034318Q0308Amend001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION

NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

03H8

Alisha Knaub Contract Specialist

Amendment 001 - HELENA-LEWIS & CLARK NATIONAL FOREST - Warehouse Siding Replacement and Insulation This amendment incorporates the following change and is hereby included in this solicitation:

-Clarification in Section 07 46 00 - Siding Specifications (see attached document with updates in red lettering)

East Side Acquisition Team Alisha Knaub 415 South Front Street Townsend, MT

927484

12034318Q0308

1 4

08/22/2018

08/09/2018

08/22/2018

SECTION 07 46 00 – SIDING

PART 1 – GENERAL

1.01 SUMMARY

A. Work includes the removal and disposal of all existing siding and exterior trim. All new siding and trim will be of Fiber-Cement. New siding installation configuration shall match the existing siding configuration; Horizontal siding on lower portion, mid-level belly band, vertical siding on upper portion.

1.02 SUBMITTALS

A. Product Data: For each type of product indicated, include construction details, material descriptions, dimensions of individual components and profiles, and finishes.

B. Maintenance Data: For each type of siding and related accessories to include in maintenance manuals.

C. Warranty: Sample of special warranty.

1.03 WARRANTY

A. Special Warranty: Standard form in which manufacturer agrees to repair or replace siding and soffit that fail(s) in materials or workmanship within specified warranty period.

a. Failures include, but are not limited to, the following:

i. Structural failures, including cracking, deforming, and fading.

ii. Deterioration of metals, metal finishes, and other materials beyond normal weathering.

b. Fading is defined as loss of color, after cleaning with product recommended by manufacturer, of more than 7 Hunter units as measured according to ASTM D 2244.

c. Warranty Period: 25 years from date of substantial completion.

PART 2 – PRODUCTS

2.01 FIBER-CEMENT SIDING

A. General: ASTM 1186, Type A, Grade II, Fiber-cement board, noncombustible when tested according to ASTM E 136; with a flame-spread index of 25 or less when tested according to ASTM E 84.

a. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

b. Basis-of-Design Product: Subject to compliance with requirements, provide James Hardie products from the HZ5 product line (engineered for Montana

Augusta Work Station Warehouse Siding and Insulation SPECIFICATIONS June 28, 2018 climate zone): Hardiplank Lap Siding or comparable product by one of the following:

i. Cemplank.

ii. CertainTeed Corp.

iii. GAF Materials Corporation.

iv. James Hardie

v. MaxiTile, Inc; a California Corporation.

vi. Nichiha Fiber Cement

vii. Everlog Siding

c. Horizontal Pattern: Boards with 6 - 10 inch exposure.

d. Vertical Pattern: Match Existing configuration.

e. Texture: Select Cedarmill or approved equal.

f. Factory Priming: Manufacturer’s standard acrylic primer.

g. Finish: Colors;

1. Siding = Chestnut Brown – JH80-30

2. Trim = Woodstock Brown – JH30-30

2.01 ACCESSORIES

A. Siding Accessories, General: Provide starter strips, edge trim, corner trim, outside and inside corner caps, and other items as recommended by siding manufacturer for building configuration.

a. Provide accessories made from same materials as adjacent siding unless otherwise indicated.

B. Decorative Accessories: Provide the following fiber-cement decorative accessories as indicated:

a. Moldings and trim

b. Soffit

c. Fascia

d. Gabel vents

e. Belly Band Trim

C. Flashing: Provide flashing complying with Division 07 Section “Sheet Metal Flashing and Trim” when needed at doors and windows.

D. Fasteners: Siding fasteners should be of sufficient length and location to meet manufacturer and ICC code requirements.

a. For fastening to wood, use siding nails of sufficient length to penetrate a minimum of 1 inch into substrate.

Augusta Work Station Warehouse Siding and Insulation SPECIFICATIONS June 28, 2018

b. For fastening fiber-cement, use stainless-steel fasteners. Stainless fasteners may be substituted with alternate fastening material components only per manufacturer’s approval/recommendation.

PART 3 – EXECUTION

3.01 INSTALLATION

A. General: Comply with siding manufacturer’s written installation instructions applicable to products and applications indicated unless more stringent requirements apply.

a. Do not install damaged components.

b. Center nails in elongated nailing slots without binding siding to allow for thermal movement.

B. Install fiber-cement siding and related accessories.

a. Install fasteners no more than 24 inches o.c.

C. Where necessary, install joint sealants to produce a weather tight installation.

D. Where necessary, install flashing to protect wall assemblies from water intrusion.

END OF SECTION 07 46 00