11_SPI_015918912.pdf
PDF 622 KB Posted
- Attached to
- EDRM - Enhanced Drogue Rocket Motor
- Solicitation number
- FA8213-26-R-3036
About this file
This is a Special Packaging Instruction (SPI) document for rocket motor packaging and shipment. The SPI, designated as SPI No. F01-591-8912 with Code ID 98747, is controlled by 406 SCMS at Gould Air Force Base and classified as CUI/SP-CTI with FEDCON dissemination control.
The document specifies two packaging levels for rocket motors under National Stock Number 1377-01-591-8912. Level A packing requires military preservation per IAW MIL-STD-2073-1 using ASTM D6251 specifications with RSC container type, accommodating items with gross dimensions of 10 inches length and width with 16 inches depth. Level B packing uses ASTM D5118 specifications with similar container dimensions. Both levels mandate wrapping items with MIL-PRF-81705 Type I Class 1 wrap, placement in MIL-DTL-117 Type I barrier bags, and A-A-1898 Grade II cushioning materials. Cleaning and drying follow IAW MIL-STD-2073-1 standards. Marking requirements reference MIL-STD-129 with specific container identification and UN PDP markings (4G/Y5/S/**). The document includes detailed palletization procedures for Level B packs with specifications for edge protectors, plywood, strapping, and pallet configuration, requiring compliance with International Standards for Phytosanitary Measures (ISPM No. 15) for all wood packaging materials. Notice 5 requires valid hazard classification documentation and DOT SP 15448 accompaniment for all shipments.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA821326R3036 0001.pdf | ||
| FA821326R3036.pdf | ||
| 16_IHC.pdf | ||
| 4_ES7034.docx | DOCX document | |
| 2_ADC_SOW.docx | DOCX document | |
| 5_REPSHIP.pdf | ||
| 7_CADPADItemMarkingInstruction.pdf | ||
| 8_CDRLS.pdf | ||
| 1_AIRSPEC_137701591892.pdf | ||
| 10_SOWPackaging.pdf | ||
| 12_ItemDescription_1377015918912.pdf |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
NOTES
1. WRAP ITEM WITH REF.-3. PLACE IN BARRIER BAG, REF.-2, REMOVE EXCESS AIR AND SEAL.
2. CENTER BAGGED ITEM IN CONTAINER USING CUSHIONING, REF.-1, TO ENSURE A TIGHT FIT.
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH THE PREVIOUS EDITION OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .