QASP.pdf

Chrysler & Ford Service and Maintenance Vendor

PERFORMANCE REQUIREMENTS SUMMARY

PERFORMANCE

INDICATOR

PERFORMANCE

STANDARD

AQL

Perform pre-repair or automotive maintenance covering operational use for road/highway travel

Inspect all system equipment concerning maintenance and/or repair.

Change fluids /oils, filters, and lubricate as applicable within the approved estimate vehicle components. Verify repair estimate and check vehicle functionality as necessary. Inspect all standard safety and operational systems for proper working condition. Inspect fan belts to achieve proper tension requirements. Prepare “repair” service order for any discrepancies or problems noted in the vehicle that need attention prior to the unit being available for service.

90%

General maintenance or repairs are completed based on inspections

Vehicles repaired for safe, legal operating condition for highway road travel. Some of the repairs may be needed in accordance with the

Industry Standard Safety requirements

Vehicle repair(s) or maintenance and/or replacement of related components or equipment for operational performance

Fully operational vehicle on types of two (2) types of vehicles at all times from 16 September through 31 December 2016. Inspect for leaks and check vehicle operation. Determine if any components are leaking. Remove and replace or re-build as needed. Install components and check system(s) for additional leaks and operation.

Identify any additional needed repairs. Replace all filters as necessary.

Check and replace excessively worn gaskets (head gaskets, cylinders gaskets, valve plate gaskets and transmission or transfer case gaskets).

Emergency road services are provided.

Note: Contractor shall act as agent for emergency road service.

The contractor shall be responsible for emergency short term recovery and/or repairs on the NTV vehicles. These repairs may be determined necessary to return equipment in serviceable operating condition for highway road travel. Some of the repairs may be needed in accordance with the Industry Safety requirements. Other equipment repairs may be related to safety or structure reliability as approved by the government.