10250676.pdf

This is a specification control drawing for a connector conduit crossover component, designated as part number D18876/1025067G, issued by the U.S. Army Missile Command in Huntsville, Alabama.

The drawing provides detailed technical specifications and dimensional requirements for manufacturing a connector conduit crossover assembly. Key specifications include material composition (SAE 360 brass commercial rod, bar, or seamless tubing), threading requirements per MIL-STD-1084 and MIL-STD-1094, and cadmium plating per QQ-P-416, Class B with specific surface finishing requirements. The component features an A-thread and D-thread configuration with precise dimensional tolerances, including a maximum wall thickness of .047 inches and a critical overall length of 3.004±.06 inches. The drawing identifies four suggested sources of supply: Breeze-Illinois, Inc. (Wyoming, Illinois); Vennair Incorporated (Glendale, California); Icore International Inc. (Sunnyvale, California); and Simmons Precision Products Inc. (Chester, New Jersey). Additional notes specify that parts must be identified by vendor's item number in accordance with MIL-STD-130, all intersecting internal sections must be free of burrs and sharp edges, and dimensions must conform to the figure provided on the drawing.