10 Site Photos Updated.pdf
PDF 3 MB Posted
- Attached to
- Hume Lake SCADA Installation
- Solicitation number
- 127EAW24R0051
- Issued by
-
Department of Agriculture Forest Service
About this file
This document appears to be a set of 10 site photos related to a federal contract opportunity for the Hume Lake SCADA Installation project in the Sequoia National Forest, California.
The key details are as follows: The Hume Lake SCADA Installation project is a small business set-aside opportunity with a total value between $25,000 and $100,000. It is being issued by the Department of Agriculture Forest Service. The project involves installing a SCADA (Supervisory Control and Data Acquisition) system at the Hume Dam site, including video cameras, a generator, and various control panels and actuators for the dam's valves. The solicitation number is 127EAW24R0051, and all Requests for Information must be submitted by July 12, 2024. No pre-proposal site visit will be held, but the site photos provided give a detailed overview of the existing infrastructure and installation locations.
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HUME DAM SCADA SYSTEM SITE PHOTOS
Aerial view of Hume Dam. Generator building is right center of photo; trail bridge is lower center.
Aerial view of trail bridge and dam. Generator building is off the bottom of the photo.
Aerial view of Dam. Generator building on West side of dam. Valves in center.
Trail bridge looking west to east (upstream is to the right).
Upstream side of trail bridge where camera is to be mounted.
Mounting location is 20’ – 30’ above ground.
West abutment of trail bridge for video camera controls and battery box installation. Upstream is to the left in the photo.
View from trail bridge to dam. Note vegetation growing below the line of sight.
View from the base of the dam downstream to the trail bridge where the video camera is to be installed.
Existing propane fueled Kohler brand 14 KW generator, model # 14RESA-QB 3 phase, 480 V.
Existing valves control panel in generator building. Schematics are attached to solicitation.
Control panel at valves prior to installation. Schematics are attached to solicitation.
Overview of outlet valves with actuators. Control panel is on left side of valves.
Actuator on ball valve used to regulate outflow (throttling).
Actuator on knifegate valve.
AMCI control panel at generator building for monitoring pressure transducer sensor in lake bed.
Schematics are attached to solicitation.
Close up of AMCI control panel at generator building.
Generator building with AMCI control panel on the front and generator battery charging solar panel on right end of building.
File details come from the government source that posted it. Updated .