10-IFB-255738 Forestry Drones-Final.pdf

PDF 409 KB Posted

Attached to
Forestry Drones
Solicitation number
Doc2358929506
Issued by
Orange County, Sea Breeze CDP, North Carolina

About this file

This Invitation for Bid (IFB 10-IFB-255738) is issued by the North Carolina Department of Agriculture and Consumer Services Forest Service for the procurement of DJI Matrice Drones and accessories. The solicitation seeks offers for four separate requisitions: RQ264229 requesting one DJI Matrice 4T Bundle with accessories and support services; RQ255743 requesting three DJI Matrice 4T Bundles with expanded accessory quantities; RQ255738 requesting three additional DJI Matrice 4T Bundles; and RQ255733 requesting one DJI Mavic 3 Multispectral Drone bundle with specialized equipment and software. The solicitation includes detailed specifications for drones, batteries, controllers, memory cards, launch pads, technical support, and pre-flight services. The written question deadline is April 7, 2026 at 12:00 PM Eastern Time, with offers due by August 25, 2026 at 2:00 PM Eastern Time and public opening on September 1, 2026. Delivery must be completed within sixty consecutive calendar days after receipt of purchase order to specified locations in Rocky Mount, Asheville, Rockingham, and Fairfield, North Carolina. The contract term is one year from the effective date of award, with the general intent to award to one vendor based on Best Value Analysis and Lowest Price Technically Acceptable Source Selection criteria.

Vendors must provide pricing for all line items across the four requisitions with unit costs and extended costs clearly identified. The solicitation requires manufacturer's standard warranty coverage, with vendors obligated to offer at least one additional year of annual maintenance after the warranty period at escalation rates not exceeding five percent per year. Support services must be available eight hours daily, Monday through Friday, with an eight-by-five next business day maximum response time. Vendors must complete and submit a Vendor Utilization of Workers Outside U.S. Disclosure Statement and comply with E-Verify requirements per North Carolina General Statutes. All offers must be submitted electronically via the Ariba Sourcing Module as a single signed PDF file, with late submissions automatically disqualified. Vendors are responsible for pre-flight service activation, hardware testing, and in-house factory-trained installation. No set-asides or incumbent information is specified. Funding source and availability are contingent upon state appropriation and allocation as detailed in the Department of Information Technology Terms and Conditions.

View the file

Other files

File Type Posted
10-IFB-255738-Addendum-1.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

OFFER AND ACCEPTANCE

The State seeks offers for the goods and/or related services described in this solicitation. The State’s acceptance of any offer must be demonstrated by execution of the acceptance found below and any subsequent Request for Best and Final Offer, if issued. Acceptance shall create a contract having an order of precedence as follows:

In cases of conflict between documents comprising the contract, the order of precedence shall be (1) Best and Final Offers, if any, (2) special terms and conditions specific to this IFB, (3) specifications, (4) Department of Information Technology Terms and Conditions of this IFB, and (5) the agreed portions of the awarded Vendor’s offer. No contract shall be binding on the State until an encumbrance of funds has been made for payment of the sums due under the contract.

EXECUTION

In compliance with this Invitation for Bid, and subject to all the conditions herein, the undersigned offers and agrees to furnish any or all Services or goods upon which prices are offered, at the price(s) offered herein, within the time specified herein. By executing this offer, I certify that this offer is submitted competitively and without collusion.

Failure to execute/sign offer prior to submittal shall render offer invalid. Late offers are not acceptable.

OFFEROR:

STREET ADDRESS: P.O. BOX: ZIP:

CITY, STATE & ZIP: TELEPHONE NUMBER: TOLL FREE TEL.

NO

PRINT NAME & TITLE OF PERSON SIGNING: FAX NUMBER:

AUTHORIZED SIGNATURE: DATE: E-MAIL:

Offer valid for sixty (60), days from date of offer opening unless otherwise stated here: ____ days

ACCEPTANCE OF OFFER

If any or all parts of this IFB are accepted, an authorized representative of the North Carolina Department of Agriculture and Consumer Services shall affix their signature hereto. A copy of this acceptance will be forwarded to the successful vendor(s).

FOR STATE USE ONLY

Offer accepted and contract awarded this ______ day of _____________________, 20____, as indicated on attached certification, by _____________________________________________ (Authorized representative of NCDA&CS).

STATE OF NORTH CAROLINA INVITATION FOR BIDS: 10-IFB-255738

NORTH CAROLINA DEPARTMENT OF

AGRICUKLTURE AND CONSUMER SERVICES

Forest Service

Offers will be publicly opened: September 01, Issue Date: August 18, 2026

Refer ALL inquiries regarding this IFB to:

Dion Elliott dion.elliott@ncagr.gov

Commodity Number: 251321 Unmanned Aerial Vehicle

Description: DJI Drones

Using Agency: NCDA&CS-Forest Services

See page 2 for mailing instructions. Requisition No.: RQ255738, RQ264229, RQ255743, RQ255733.

mailto:dion.elliott@ncagr.gov

IFB Number: 10-IFB-255738-DME

Page 2 of 3 Version 5.4.2026

TABLE OF CONTENTS

1.0 INTENT, USE, DURATION AND SCOPE

2.0 GENERAL INFORMATION

2.1. VENDOR QUESTIONS

2.2. ADDENDA

2.3. OFFER SUBMITTAL

2.4. BASIS FOR REJECTION

2.5. LATE OFFERS

2.6. NON-RESPONSIVE OFFERS

2.7. NOTICE TO VENDORS

2.8. E-PROCUREMENT SOLICITATION

2.9. DISTRIBUTORS AND RESELLERS

2.10. POSSESSION AND REVIEW

2.11. BEST AND FINAL OFFERS (BAFO)

2.12. AWARD

2.13. POINTS OF CONTACT

3.0 SPECIFICATIONS

3.1. VENDOR STANDARD AGREEMENT(S)

3.2. VENDOR UTILIZATION OF WORKERS OUTSIDE U.S. – DISCLOSURE STATEMENT

3.3. E-VERIFY

3.4. BRAND SPECIFIC PRODUCT

3.5 SECURITY SPECIFICATIONS

3.6. PRODUCT RECALL

3.7. WARRANTY

3.8. MAINTENANCE

3.9. CONTRACT TERM

3.10. DELIVERY

4.0 FURNISH AND DELIVER

5.0 ADDITIONAL INFORMATION

5.1. RECYCLED CONTENT

5.2. ENERGY STAR PRODUCTS

6.0 DEPARTMENT OF INFORMATION TECHNOLOGY INSTRUCTIONS TO VENDORS

7.0 DEPARTMENT OF INFORMATION TECHNOLOGY TERMS AND CONDITIONS

Page 3 of 4 Version 5.4.2026

1.0 INTENT, USE, DURATION AND SCOPE

The purpose of this Invitation for Bid is to obtain pricing for and procure DJI Matrice Drones and Accessories for the NC Department of Agriculture and Consumer Services-Forest Services. Goods and Services will be provided in accordance to the terms and conditions of this IFB.

2.0 GENERAL INFORMATION

2.1. VENDOR QUESTIONS

All inquiries regarding the solicitation specifications or requirements are to be addressed to the contact person listed on Page One of this solicitation. Vendor contact regarding this Solicitation with anyone other than the contact person listed on Page One of this Solicitation may be grounds for rejection of said Vendor’s offer.

All inquiries regarding the solicitation specifications or requirements must be addressed to the contact person listed on Page One of this solicitation via the Ariba Sourcing Tool’s message board. Vendor contact regarding this Solicitation with anyone other than the contact person listed on Page One of this Solicitation may be grounds for rejection of said Vendor’s offer.

Written questions concerning this Solicitation will be received until April 07, 2026, at 12:00pm Eastern Time. Please enter “Questions Solicitation XXXX” as the subject for the message.

2.2. ADDENDA

The State may issue addenda if Vendor questions are permitted as described above, or if additional terms, specifications, or other changes are necessary for this procurement. It is important that all Vendors bidding on this IFB periodically check the NC eVP for any and all Addenda that may be issued prior to the offer opening date. All addenda shall become an Addendum to this IFB.

2.3. OFFER SUBMITTAL

Due Date: August 25, 2026 Time: 02:00 pm Eastern Time

IMPORTANT NOTE: Vendor shall bear the risk for late submission due to unintended or unanticipated delay—whether submitted electronically, delivered by hand, U.S. Postal Service, courier or other delivery service. Vendor must include all the pages of this solicitation in their response. It is the Vendor’s sole responsibility to ensure its offer has been delivered to this Office by the specified time and date of opening. Any proposal delivered after the proposal deadline will be rejected.

Sealed offers, subject to the conditions made a part hereof, will be received by the time and date specified above and then opened for furnishing and delivering the commodity as described herein.

It is the Vendor’s sole responsibility to submit its offer by the specified time and date of opening.

The Vendor shall bear the risk for late electronic submission due to unintended or unanticipated delay including, but not limited to, internet issues, network issues, local power outages, or application issues. No offers are able to be uploaded in Ariba after the deadline/bid opening date and time.

a) Submit one (1) signed, original electronic offer via the Ariba Sourcing Module. The Vendor to include the signed Execution Page 1 WITH the remaining pages of the solicitation in one PDF. The Execution Page 1 must be signed and dated by an official authorized to bind the Vendor’s firm. Failure to return a signed offer shall result in disqualification.

b) File names should identify the Vendor, solicitation, and document in that order (Vendor Name – Solicitation Number – Offer, etc.).

Page 4 of 5 Version 5.4.2026

c) Files must not be password protected. They must be in .PDF, .JPEG, .DOC or .XLS format and capable of being copied to other sources. The Vendor’s offer may be deemed non-responsive if the Agency is unable to open the file(s).

d) If the offer contains any confidential information (as defined in the NCDIT Terms and Conditions, Section 1, Paragraph 18), the Vendor must provide one (1) redacted electronic copy in addition to the original copy.

2.4. BASIS FOR REJECTION

Pursuant to 9 NCAC 06B.0401, the State reserves the right to reject any and all offers, in whole or in part; by deeming the offer unsatisfactory as to quality or quantity, delivery, price or service offered;

non-compliance with the specifications or intent of this solicitation; lack of competitiveness; error(s) in specifications or indications that revision would be advantageous to the State; cancellation or other changes in the intended project, or other determination that the proposed requirement is no longer needed; limitation or lack of available funds; circumstances that prevent determination of the best offer; or any other determination that rejection would be in the best interest of the State. Vendor contact regarding this IFB with anyone other than Dion Elliott may be grounds for rejection of said Vendor’s offer.

2.5. LATE OFFERS

Regardless of cause, late offers will not be accepted and will automatically be disqualified from further consideration. It shall be the Vendor’s sole risk to ensure delivery at the designated office by the designated time. Late offers will not be opened and may be returned to the Vendor at the expense of the Vendor or destroyed if requested.

2.6. NON-RESPONSIVE OFFERS

Vendor offers will be deemed non-responsive by the State and will be rejected without further consideration or evaluation if statements such as the following are included:

• “This offer does not constitute a binding offer”,

• “This offer will be valid only if this offer is selected as a finalist or in the competitive range”,

• “Vendor does not commit or bind itself to any terms and conditions by this submission”,

• “This document and all associated documents are non-binding and shall be used for discussion purposes only”,

• “This offer will not be binding on either party until incorporated in a definitive agreement signed by authorized representatives of both parties”, or

• A statement of similar intent.

2.7. NOTICE TO VENDORS

The State objects to and will not be required to evaluate or consider any additional terms and conditions not previously agreed to by the State and submitted with an Offeror’s response.

This applies to any language appearing in or attached to the document as part of the Offeror’s response. By execution and delivery of this Invitation for Bids and response(s), the Offeror agrees that any additional terms and conditions, whether submitted purposely or inadvertently, shall have no force or effect.

2.8. E-PROCUREMENT SOLICITATION

This is an E-Procurement solicitation. See Paragraph #47 of the attached Department of Information Technology Terms and Conditions.

Page 5 of 6 Version 5.4.2026

2.9. DISTRIBUTORS AND RESELLERS

“Resellers” as used herein, refers to businesses that routinely sell or distribute Vendor’s Products, and may include “Distributors”, “Value Added Resellers” (VARs), “Original Equipment Manufacturers” (OEMs), Channel Partners, or such other designations. These businesses must be approved by the State prior to placement of any orders. Any contract established will be subject to this solicitation and any resulting Agreement(s), and to the terms and conditions of the State’s competitive bidding process.

The Agency acknowledges that the Reseller has merely purchased the Third-Party Items for resale or license to the Agency, and that the proprietary and intellectual property rights to the Third-Party Items are owned by parties other than the Reseller (“Third Parties”). The Agency further acknowledges that except for the payment to the Reseller for the Third-Party Items, all of its rights and obligations with respect thereto flow from and to the Third Parties. The Reseller shall provide the Agency with copies of all documentation and warranties for the Third-Party Items which are provided to the Reseller. The Reseller shall assign all applicable third-party warranties for Deliverables to the Agency.

2.10. POSSESSION AND REVIEW

During the evaluation period and prior to award, possession of the bids and accompanying information is limited to personnel of the issuing agency, and to the committee responsible for participating in the evaluation. Vendors who attempt to gain this privileged information, or to influence the evaluation process (i.e. assist in evaluation) will be in violation of purchasing rules and their offer will not be further evaluated or considered.

After award of contract the complete bid file will be available to any interested persons with the exception of trade secrets, test information or similar proprietary information as provided by statute and rule. Any proprietary or confidential information, which conforms to exclusions from public records as provided by N.C.G.S. §132-1.2 must be clearly marked as such in the offer when submitted.

2.11. BEST AND FINAL OFFERS (BAFO)

The State may establish a competitive range based upon evaluations of offers, and request BAFOs from the Vendor(s) within this range; e.g. “Finalist Vendor(s)”. If negotiations or subsequent offers are solicited, the Vendor(s) shall provide BAFO(s) in response. Failure to deliver a BAFO when requested shall disqualify the non-responsive Vendor from further consideration. The State will evaluate BAFO(s), oral presentations, and product demonstrations as part of the Vendors’ respective offers to determine the final rankings.

2.12. AWARD

It is the general intent to award this contract to one Vendor. As provided by statute, award will be based on Best Value Analysis, Lowest Price Technically Acceptable Source Selection Method in accordance with N.C.G.S. §143B-1350(h), which provides that the offer must be in substantial conformity with the specifications herein, and 09 NCAC 06B.0302.

A link to the NC Electronic Vendor Portal (eVP) allows the public to retrieve contract award information electronically from the web site: https://evp.nc.gov/ Results may be found by searching by IFB number or agency name. This information may not be available for several weeks dependent upon the complexity of the acquisition and the length of time to complete the evaluation process.

2.13. POINTS OF CONTACT

Contact by the Offeror with the persons shown below for contractual and technical matters related to this IFB is only permitted if expressly agreed to by the purchasing lead named on page 5, or upon award of contract:

https://evp.nc.gov/

Page 6 of 7 Version 5.4.2026

Vendor Contractual Point of Contact Vendor Technical Point of Contact Name of Vendor:

Street:

City, State, Zip:

Attn:

Email:

Name of Vendor:

Street:

City, State, Zip:

Attn:

Email:

3.0 SPECIFICATIONS

3.1. VENDOR STANDARD AGREEMENT(S)

The terms and conditions of Vendor’s standard services, license, maintenance or other agreement(s) applicable to Services, Goods, Software and other Products acquired under this Agreement may apply to the extent such terms and conditions do not materially change the terms and conditions of this Agreement. In the event of any conflict between the terms and conditions of this Agreement and the Vendor’s standard agreement(s), the terms and conditions of this Agreement relating to audit and records, jurisdiction, choice of law, the State’s electronic procurement application of law or administrative rules, the remedy for intellectual property infringement and the exclusive remedies and limitation of liability in the DIT Terms and Conditions herein shall apply in all cases and supersede any provisions contained in Vendor’s relevant standard agreement or any other agreement. The State shall not be obligated under any standard license and/or maintenance or other Vendor agreement(s) to indemnify or hold harmless the Vendor, its licensors, successors or assigns; nor arbitrate any dispute, nor pay late fees, legal fees or other similar costs.

For Vendor Completion:

_____ The Vendor represents and warrants that the terms and conditions of Vendor’s standard license, maintenance, or other agreement(s) do not apply to this procurement. No vendor agreement, standard or otherwise is incorporated into this IFB #xxxxxxx.

_____ The Vendor standard license, maintenance, or other agreement(s) is provided with the IFB response and shall be incorporated into this IFB #xxxxxxx based on the outcome of a legal review.

3.2. VENDOR UTILIZATION OF WORKERS OUTSIDE U.S. – DISCLOSURE STATEMENT

In accordance with the Statewide Information Security Manual (SISM), the State restricts the location of information systems that receive, process, store, or transmit State and Federal data to the United States which includes the following areas: US States, US Territories, US Embassies, and US Military installations (stateside or overseas). This restriction applies to the Vendor and to any subcontractors engaged to provide Services under this Agreement or with access to State Data.

The Vendor must ensure that its subcontractor agreements contain the same restrictions and will be responsible for monitoring and enforcing subcontractor compliance at all times.

Pursuant to N.C.G.S. §143B-1361(b), the Vendor must complete and return this Disclosure Statement Attachment F with its solicitation response. The Vendor may attach additional pages to its response if needed. The State of North Carolina will evaluate Disclosure Statement Attachments for additional risks, costs, and other factors associated with its service prior to making an award for any such Vendor’s offer. The Vendor must provide the following information in its bid response:

Vendor to complete:

Page 7 of 8 Version 5.4.2026

a. The location of work performed under a state contract by the Vendor, any subcontractors, employees, or other persons performing the contract and whether any of this work will be performed outside the United States.

b. The corporate structure and location of corporate employees and activities of the Vendor, its affiliates or any other subcontractors.

c. Vendor agrees to provide notice of the relocation of the Vendor, employees of the Vendor, subcontractors of the Vendor, or other persons performing Services under a state contract outside of the United States in the event such relocation occurs during the contract term.

d. Vendor agrees that any Vendor or subcontractor providing call or contact center Services to the State of North Carolina shall disclose to inbound callers the location from which the call or contact center Services are being provided.

e. Will any work under this contract be performed outside the United States?

YES NO

The use of resources or workers located outside the United States is a critical security exception that must be escalated to the State Chief Information Officer for review pursuant to N.C.G.S. §143B- 1376(c) and §143B-1320(c). These critical security exceptions are approved only in rare and extenuating circumstances. Vendor should account for this when preparing its response.

Click here to enter text.

Click here to enter text.

Click here to enter text.

Click here to enter text.

Page 8 of 9 Version 5.4.2026

3.3. E-VERIFY

Pursuant to N.C.G.S. § 143B-1350(k), the State shall not enter into a contract unless the awarded Vendor and each of its subcontractors comply with the E-Verify requirements of N.C.G.S. Chapter 64, Article 2. Vendors are directed to review the foregoing laws. Any awarded Vendor must submit a certification of compliance with E-Verify to the awarding agency, and on a periodic basis thereafter as may be required by the State.

3.4. BRAND SPECIFIC PRODUCT

Manufacturer(s) name and product descriptions used in this solicitation are product specific. The items offered in response to this solicitation must be the manufacturer and type specified. Failure to comply with this requirement will result in rejection of offer.

3.5 SECURITY SPECIFICATIONS

3.5.1SOLUTIONS HOSTED ON STATE INFRASTRUCTURE

Vendors shall provide a completed Vendor Readiness Assessment Report State Hosted Solutions (“VRAR”) at offer submission. This report is located at the following website:

https://it.nc.gov/documents/vendor-readiness-assessment-report The Drones will be required to receive and securely manage data that is classified as Public (formerly Low Risk). Refer to the North Carolina Statewide Data Classification and Handling policy for more information regarding this data classification. The policy is located at the following website:

https://it.nc.gov/document/statewide-data-classification-and-handling-policy To comply with the State’s Security Standards and Policies, State agencies are required to perform annual security/risk assessments on their information systems using NIST 800-53 controls.

3.5.2 SOLUTIONS NOT HOSTED ON STATE INFRASTRUCTURE-RESERVED

3.6. PRODUCT RECALL

Vendor assumes full responsibility for prompt notification of both the contract administrator and purchaser of any product recall in accordance with the applicable state and federal regulations.

3.7. WARRANTY

Manufacturer’s standard warranty shall apply. Upon request by the State, Vendor shall provide a copy of the manufacturer’s standard warranty within two (2) business days.

3.8. MAINTENANCE

Vendor must offer at least one (1) additional year of annual maintenance for use after the initial one-year warranty period expires. The State may elect to receive approved provider’s then-current maintenance service upon payment of applicable annual maintenance fees, beginning at the end of the warranty period. Maintenance services may be renewed upon written notice by the State prior to the contract anniversary date. Escalation of annual maintenance fees shall not exceed 5% per year. Any maintenance agreements shall be subject to the terms of this contract. For this period support must be provided 8:00 am to 5:00 pm Monday through Friday and shall include an 8x5xNext Business Day maximum response time.

For completion by Vendor: Vendor’s maximum response time to this location after receipt of service call: ____________________________ hours https://it.nc.gov/documents/vendor-readiness-assessment-report https://it.nc.gov/document/statewide-data-classification-and-handling-policy

Page 9 of 10 Version 5.4.2026

Describe in detail the items and services to be covered under the extended maintenance:

3.9. CONTRACT TERM

A contract awarded pursuant to this IFB shall have an effective date as provided in the Notice of Award. The term shall be one (1) year and will expire upon the anniversary date of the effective date unless otherwise stated in the Notice of Award, or unless terminated earlier.

3.10. DELIVERY

Successful Vendor will complete the scope of work within Sixty (60) consecutive calendar days after receipt of purchase order to the following location(s):

See Section 4.0 Furnish and Deliver Below for Delivery Locations.

For completion by Vendor: Delivery of goods will be made from

__________________________ (city, state) within ______ consecutive days after receipt of order.

Delivery shall not be considered to have occurred until installation has been completed. Upon completion of the installation, the Vendor shall remove and properly dispose of all waste and debris from the installation site. Vendor shall be responsible for leaving the installation area clean and ready to use.

If circumstances beyond the control of the contractor result in a late delivery [or installation], it is the responsibility and obligation of the contractor to notify the Purchasing Agent listed on the purchase order, in writing, immediately upon determining delay of shipment. The written notification should indicate the anticipated delivery dated.

4.0 FURNISH AND DELIVER

RQ264229

ITEM #

QTY

UNIT

DESCRIPTION

UNIT COST

EXTENDED COST

1 1 each DJI Matrice 4T Bundle

S-DJI-M4T-STN/CP.EN.00000546.01

To include:

DJI Matrice 4 Series Battery

DJI RC Plus 2 Enterprise Controller

DJI 100W USB-C Power Adapter

DJI Matrice 4 Series Charging Hub microSD Card

DJI Matrice 4T Gimbal Protector

DJI Cellular Dongle 2 Pry Bar

Page 10 of 11 Version 5.4.2026

DJI Matrice 4 Series Propellers

100W Power Adaptor AC Cable

USB-C to USB-C Data Cable

USB-A to USB-C Data Cable

DJI Matrice 4 Series Storage Case

DJI Matrice 4 Series Storage Case Shoulder Strap

2 3 each DJI Matrice 4 Series Battery

S-DJI-M4-BAT/ CP.EN.00000559.02

3 1 each DJI WB37 Intelligent Battery

S-DJI-CS-CEN-INT-BATT/CP.BX.000229.02

4 1 each DJI WB37 Battery Charging Hub

S-DJI-CS-CEN-BATT-CHRG-

HUB/CP.RN.00000203.01

5 1 each DJI Matrice 4 Series Propellers

S-DJI-M4-PROP/CP.EN.00000556.01

6 2 each SanDisk Extreme PRO microSDXC UHS-I Memory Card (64GB)

7 1 each Go Professional Cases microSD Card Holder

8 1 each Drone Launch Pad 3ft-

9 1 each Lens Cleaning Pen

10 1 each Pre-Flight Service to include:

Activation of all hardware and any service plans.

Updating and testing of all critical flight components;

All to be performed in-house and factory trained.

11 1 each Technical Support 24hrs 7 Days 365 Days/year

12 1 each DJI Speaker

S-DJI-AS1/CP.EN.00000578.01

13 1 each DJI RC Plus 2 strap and waist support Kit

S-DJI-RC-PLUS-2-KIT/CP.RC.00000035.01

Page 11 of 12 Version 5.4.2026

14 1 each DJI Spotlight

S-DJI-AL1/ CP.EN.00000579.01

1 each Freight

Delivery Adress:

NC Forest Service D05 - HQ Rocky Mount 737 Smokey Road Rocky Mount, NC 27804-2002

RQ255743

1 3 each DJI Matrice 4T Bundle

S-DJI-M4T-STN/CP.EN.00000546.01

To include:

DJI Matrice 4 Series Battery

DJI RC Plus 2 Enterprise Controller

DJI 100W USB-C Power Adapter

DJI Matrice 4 Series Charging Hub microSD Card

DJI Matrice 4T Gimbal Protector

DJI Cellular Dongle 2 Pry Bar

DJI Matrice 4 Series Propellers

100W Power Adaptor AC Cable

USB-C to USB-C Data Cable

USB-A to USB-C Data Cable

2 9 each DJI Matrice 4 Series Battery

3 3 each DJI WB37 Intelligent Battery

4 3 each DJI WB37 Battery Charging Hub

5 3 each DJI Matrice 4 Series Propellers

Page 12 of 13 Version 5.4.2026

6 6 each SanDisk Extreme PRO microSDXC UHS-I Memory

7 3 each Go Professional Cases microSD Card Holder

8 3 each Drone Launch Pad 3ft

9 3 each Lens Cleaning Pen

Activation of all hardware and any service plans.

11 1 each Technical Support: 24hrs 7 Days 365 Days/year

12 3 each DJI Speaker

S-DJI-AS1/CP.EN.00000578.01

13 3 each DJI RC Plus 2 strap and waist support Kit

S-DJI-RC-PLUS-2-KIT/CP.RC.00000035.01

14 3 each DJI Spotlight

S-DJI-AL1/ CP.EN.00000579.01

15 1 each Freight

Delivery Adress:

NCDA&CS Forest Service Regional Forester 14 Gaston Mountain Road Asheville, NC 28806

RQ255738

1 3 each DJI Matrice 4T Bundle

S-DJI-M4T-STN/CP.EN.00000546.01

To include:

DJI Matrice 4 Series Battery

Page 13 of 14 Version 5.4.2026

DJI RC Plus 2 Enterprise Controller

DJI 100W USB-C Power Adapter

DJI Matrice 4 Series Charging Hub microSD Card

DJI Matrice 4T Gimbal Protector

DJI Cellular Dongle 2 Pry Bar

DJI Matrice 4 Series Propellers

100W Power Adaptor AC Cable

USB-C to USB-C Data Cable

USB-A to USB-C Data Cable

2 9 each DJI Matrice 4 Series Battery

3 3 each DJI WB37 Intelligent Battery

4 3 each DJI WB37 Battery Charging Hub

5 3 each DJI Matrice 4 Series Propellers

6 6 each SanDisk Extreme PRO microSDXC UHS-I Memory

7 3 each Go Professional Cases microSD Card Holder

8 3 each Drone Launch Pad 3ft

9 3 each Lens Cleaning Pen

Activation of all hardware and any service plans.

Page 14 of 15 Version 5.4.2026

11 1 each Technical Support: 24hrs 7 Days 365 Days/year

12 1 each Freight

Delivery Adress:

NCDA&CS Forest Service

Attention: Jeremy Callicutt

1163 N US 1 Highway Rockingham NC 28379-8513

RQ255733

1 1 each DJI Mavic 3 Multispectral Drone

S-DJI-M3M/CP.EN.00000444.01

To include:

DJI Mavic 3 Series Battery with RTK Module

DJI RC Plus 2 Enterprise Controller

DJI 100W USB-C Power Adapter

DJI Mavic 3 Series Charging Hub microSD Card

3x DJI Mavic 3 Series Propellers

100W Power Adaptor AC Cable

USB-C to USB-C Data Cable

USB-A to USB-C Data Cable

2 1 each DJI Mavic 3 Intelligent Flight Battery

S-DJI-M3E-BATKIT/CP.EN.00000421.01

To include 3 batteries

3 1 each DJI Mavic 3 PRCS Elite

122-101-1008/Colorado Drone Chargers

S-DJI-RCPRO-ENT

4 1 each DJI Controller Lanyard Bracket

S-DJI-RC-PLUS-2-KIT

5 2 each SanDisk Extreme PRO microSDXC UHS-I Memory

Page 15 of 16 Version 5.4.2026

6 1 each Go Professional Cases microSD Card Holder

7 1 each Lens Cleaning pen

8 1 each Drone Launch Pad 3 ft

9 1 each Pre-Flight Service

Activation of all hardware and any service plans.

10 1 each Technical Support 24hrs 7 Days 365 Days/year

11 1 each Pix4Dfields Yearly License 140-104-1002

12 1 each Freight

Delivery Adress:

NC Forest Service D13 - HQ Fairfield 9291 Piney Woods Road Fairfield, NC 27826-0127

Total Offer Cost: $________________

5.0 ADDITIONAL INFORMATION

5.1. RECYCLED CONTENT

In an effort to support the sustainability efforts of the State of North Carolina Executive Order Number 156, we solicit your cooperation.

Does the packaging of the items offered in response to this IFB contain recycled content?

YES NO

If Vendor answered “YES” above, indicate the following:

Percentage of recycled content: _________ Can the packaging be recycled? YES NO

Do items offered in response to this solicitation contain recycled content? YES NO https://www.responsiblepurchasing.org/UserFiles/File/north%20carolina%20ex%20or%20156.pdf https://www.responsiblepurchasing.org/UserFiles/File/north%20carolina%20ex%20or%20156.pdf

Page 16 of 17 Version 5.4.2026

If Vendor answered “YES” above, indicate the material and content percentage of applicable items.

Material: ___________________________ Percentage of recycled content: ________

State how items may be disposed of or recycled at the end of use?

5.2. ENERGY STAR PRODUCTS

“ENERGY STAR® is a government-backed program helping businesses and individuals protect the environment through superior energy efficiency.” http://www.energystar.gov/ Do products offered meet Energy Star specifications of energy efficiency? YES NO

6.0 DEPARTMENT OF INFORMATION TECHNOLOGY INSTRUCTIONS TO VENDORS

1) READ, REVIEW AND COMPLY: It shall be the Vendor’s responsibility to read this entire document, review all enclosures and attachments, and comply with all requirements specified herein.

2) DEFINITIONS:

• NCDIT: The North Carolina Department of Information Technology, formerly Office of Information

Technology Services

• NCDIT CONVENIENCE CONTRACT: A contract that is used for the procurement of IT goods or

Services. These contracts are in place for the convenience of the state and use of them is optional.

• OPEN MARKET CONTRACT: A contract for the purchase of goods or Services not covered by a term, technical, or convenience contract.

• TERM CONTRACT: A contract in which a source of supply is established for a specified period of time for specified Services or supplies; usually characterized by an estimated or definite minimum quantity, with the possibility of additional requirements beyond the minimum, all at a predetermined unit price

• THE STATE: Is the state of North Carolina and its agencies.

• VENDOR: Company, firm, corporation, partnership, individual, etc., submitting a response to a solicitation.

3) PROMPT PAYMENT DISCOUNTS: Vendors are urged to compute all discounts into the price offered. If a prompt payment discount is offered, it will not be considered in the award of the contract except as a factor to aid in resolving cases of identical prices.

4) INFORMATION AND DESCRIPTIVE LITERATURE: Vendor is to furnish all information requested and in the spaces provided in this document. Further, if required elsewhere in this IFB, each Vendor must submit with their offer sketches, descriptive literature and/or complete specifications covering the products offered. Only information that is received in response to this IFB will be evaluated.

Reference to information previously submitted or Internet Website Addresses (URLs) will not satisfy this provision. Offers, which do not comply with these requirements, will be subject to rejection.

5) RECYCLING AND SOURCE REDUCTION: It is the policy of this State to encourage and promote the purchase of products with recycled content to the extent economically practicable, and to purchase items, which are reusable, refillable, repairable, more durable, and less toxic to the extent that the purchase or use is practicable and cost-effective. We also encourage and promote using minimal packaging and the use of recycled/recyclable products in the packaging of commodities purchased. However, no sacrifice in quality of packaging will be acceptable. The company remains responsible for providing packaging that will protect the commodity and contain it for its intended use.

Companies are strongly urged to bring to the attention of the relevant purchasers in the State those products or packaging they offer which have recycled content and that are recyclable.

6) CLARIFICATIONS/INTERPRETATIONS: Any and all questions regarding this document must be addressed to the purchaser named on the cover sheet of this document. Do not contact the user http://www.energystar.gov/

Page 17 of 18 Version 5.4.2026 directly. Any and all revisions to this document shall be made only by written addendum from NCDIT.

The Vendor is cautioned that the requirements of this IFB can be altered only by written addendum and that verbal communications from whatever source are of no effect.

7) ACCEPTANCE AND REJECTION: The State reserves the right to reject any and all offers, to waive any informality in offers and, unless otherwise specified by the Vendor, to accept any item in the offer.

If either a unit price or an extended price is obviously in error and the other is obviously correct, the incorrect price will be disregarded.

8) AWARD OF CONTRACT: Responsive offers will be evaluated and acceptance may be made in accordance with Best Value procurement practices as defined by N.C.G.S. §143-135.9, and in accordance with N.C.G.S. §143B-1350(h), which provides that the offer must be in substantial conformity with the specifications herein, and 09 NCAC 06B.0302. Unless otherwise specified by the State or the Vendor, the State reserves the right to accept any item or group of items on a multi-item offer. In addition, on agency specific or term contracts, NCDIT reserves the right to make partial, progressive or multiple awards: where it is advantageous to award separately by items; or where more than one supplier is needed to provide the contemplated requirements as to quantity, quality, delivery, service, geographical areas; other factors deemed by NCDIT to be pertinent or peculiar to the purchase in question.

9) SAMPLES: Sample of items, when required, must be furnished as stipulated herein, free of expense, and if not destroyed will, upon request be returned at the Vendor’s expense. Written request for the return of samples must be made within 10 days following date of offer opening. Otherwise the samples will become the property of the State. Each individual sample must be labeled with the Vendor’s name, offer number, and item number. A sample, on which an award is made, will be retained until the contract is completed, and then returned, if requested, as specified above.

10) MISCELLANEOUS: Masculine pronouns shall be read to include feminine pronouns and the singular of any word or phrase shall be read to include the plural and vice versa.

11) PROTEST PROCEDURES: When an offeror wants to protest a contract awarded pursuant to this solicitation that is over $25,000 they must submit a written request to the issuing agency at the address given in this document. This request must be received in this office within fifteen (15) calendar days from the date of the contract award, and must contain specific sound reasons and any supporting documentation for the protest. Note: Contract award notices are sent only to those actually awarded contracts, and not to every person or firm responding to this solicitation. IFB status and Award notices are posted on at https://evp.nc.gov/. All protests will be governed by NCAC Title 9, Department of Information Technology (formerly Office of Information Technology Services), Subchapter 06B Sections .1101 - .1121.

12) VENDOR REGISTRATION AND SOLICITATION NOTIFICATION SYSTEM: Vendor Link NC allows Vendors to electronically register with the State to receive electronic notification of current procurement opportunities for goods and services available on the NC Electronic Vendor Portal (eVP) at the following web site: https://evp.nc.gov/

13) DIGITAL IMAGING: The State will digitize the Vendor’s response if not received electronically, and any awarded contract together with associated contract documents. This electronic copy shall be a preservation record and serve as the official record of this solicitation with the same force and effect as the original written documents comprising such record. Any printout or other output readable by sight shown to reflect such record accurately is an "original."

Page 18 of 19 Version 5.4.2026

7.0 DEPARTMENT OF INFORMATION TECHNOLOGY TERMS AND CONDITIONS

1) DEFINITIONS: As used herein;

a) Deliverable/Product Warranties shall mean and include the warranties provided for products or deliverables licensed to the State in Paragraphs 7 and 8, and included in Paragraph 29 c) of these Terms and Conditions unless superseded by a Vendor’s Warranties pursuant to Vendor’s License or Support Agreements.

b) Purchasing State Agency or Agency shall mean the Agency purchasing the goods or Services.

c) Services shall mean the duties and obligations accepted by the Vendor to carry out the requirements, and meet the specifications, of this procurement.

d) State shall mean the State of North Carolina, the Department of Information Technology as an

Agency or in its capacity as the Award Authority.

2) STANDARDS: Manufactured items and/or fabricated assemblies comprising Deliverables shall meet all requirements of the Occupational Safety and Health Act (OSHA), and State and federal requirements relating to clean air and water pollution, if applicable. Vendor will provide and maintain a quality assurance system or program that includes any Deliverables and will tender to the State only those Deliverables that have been inspected and found to conform to the requirements of this Contract. All manufactured items and/or fabricated assemblies comprising Deliverables are subject to operation, certification or inspection, and accessibility requirements as required:

by State or federal Regulation, by the Chief Information Officer’s (CIO) policy or regulation, or acceptance with appropriate standards of operations or uses of said Deliverables as may be shown by identification markings or other means of the appropriate certifying standards organization.

a) Site Preparation: Vendors shall provide the Purchasing State Agency complete site requirement specifications for the Deliverables, if any. These specifications shall ensure that the Deliverables to be installed shall operate properly and efficiently within the site environment. The Vendor shall advise the State of any site requirements for any Deliverables required by the State’s specifications. Any alterations or modification in site preparation which are directly attributable to incomplete or erroneous specifications provided by the Vendor and which would involve additional expenses to the State, shall be made at the expense of the Vendor.

b) Goods Return: Deliverables and any other goods or materials furnished by the Vendor to fulfill technical requirements shall be in good working order and be maintained in good working order by Vendor for the duration of the Contract; unless otherwise provided in a separate maintenance agreement or in the Solicitation Documents. Deliverables failing to meet the State’s technical requirements shall be considered non-conforming goods and subject to return to the Vendor for replacement at the State’s option, and at the Vendor’s expense. The State is responsible for the return costs related to the termination of a Contract, including deinstallation, and freight to destinations within the Continental United States; except in the case of default by the Vendor or delivery of non-conforming goods by Vendor. Shipping or freight charges, if any, paid by the State for non-conforming goods will be reimbursed to the State.

c) Specifications: The apparent silence of the specifications as to any detail, or the apparent omission of detailed description concerning any point, shall be regarded as meaning that only the best commercial practice is to prevail and only material and workmanship of the first quality may be used. Upon any notice of noncompliance provided by the State, Vendor shall supply proof of compliance with the specifications. Vendor must provide written notice of its intent to deliver alternate or substitute products, goods or Deliverables. Alternate or substitute products, goods or Deliverables may be accepted or rejected in the sole discretion of the State; and any such alternates or substitutes must be accompanied by Vendor’s certification and evidence satisfactory to the State that the function, characteristics, performance and endurance will be equal or superior to the original Deliverables specified.

3) WARRANTIES: Vendor shall assign all applicable third party warranties for Deliverables to the Purchasing State Agency.

Page 19 of 20 Version 5.4.2026

4) PERSONNEL: Vendor shall not substitute key personnel assigned to the performance of this Contract without prior written approval by the Agency Contract Administrator. Any desired substitution shall be noticed to the Agency’s Contract Administrator accompanied by the names and references of Vendor’s recommended substitute personnel. The Agency will approve or disapprove the requested substitution in a timely manner. The Agency may, in its sole discretion, terminate the Services of any person providing Services under this Contract. Upon such termination, the Agency may request acceptable substitute personnel or terminate the contract Services provided by such personnel.

a) Vendor personnel shall perform their duties on the premises of the State, during the State’s regular work days and normal work hours, except as may be specifically agreed otherwise, established in the specification, or statement of work.

b) This Contract shall not prevent Vendor or any of its personnel supplied under this Contract from performing similar Services elsewhere or restrict Vendor from using the personnel provided to the State, provided that:

i) Such use does not conflict with the terms, specifications or any amendments to this Contract, or

ii) Such use does not conflict with any procurement law, regulation or policy, or

iii) Such use does not conflict with any non-disclosure agreement, or term thereof, by and between the State and Vendor or Vendor’s personnel.

5) SUBCONTRACTING: The Vendor may subcontract the performance of required Services with other

Vendors or third parties, or change subcontractors, only with the prior written consent of the contracting authority. Vendor shall provide the State with complete copies of any agreements made by and between Vendor and all subcontractors. The selected Vendor remains solely responsible for the performance of its subcontractors. Subcontractors, if any, shall adhere to the same standards required of the selected Vendor. Any contracts made by the Vendor with a subcontractor shall include an affirmative statement that the State is an intended third party beneficiary of the contract; that the subcontractor has no agreement with the State; and that the State shall be indemnified by the Vendor for any claim presented by the subcontractor. Notwithstanding any other term herein, Vendor shall timely exercise its contractual remedies against any non-performing subcontractor and, when appropriate, substitute another subcontractor.

6) VENDOR’S REPRESENTATION: Vendor warrants that qualified personnel will provide Services in a professional manner. “Professional manner” means that the personnel performing the Services will possess the skill and competence consistent with the prevailing business standards in the information technology industry. Vendor agrees that it will not enter any agreement with a third party that might abridge any rights of the State under this Contract. Vendor will serve as the prime Vendor under this Contract. Should the State approve any subcontractor(s), the Vendor shall be legally responsible for the performance and payment of the subcontractor(s). Names of any third party Vendors or subcontractors of Vendor may appear for purposes of convenience in Contract documents; and shall not limit Vendor’s obligations hereunder. Third party subcontractors, if approved, may serve as subcontractors to Vendor. Vendor will retain executive representation for functional and technical expertise as needed in order to incorporate any work by third party subcontractor(s).

a) Intellectual Property. Vendor has the right to provide the Services and Deliverables without violating or infringing any law, rule, regulation, copyright, patent, trade secret or other proprietary right of any third party. Vendor represents that its Services and Deliverables are not the subject of any actual or threatened actions arising from, or alleged under, any intellectual property rights of any third party.

b) Inherent Services. If any Services, Deliverables, functions, or responsibilities not specifically described in this Contract are required for Vendor’s proper performance, provision and delivery of the Service and Deliverables pursuant to this Contract, or are an inherent part of or necessary sub-task included within the Service, they will be deemed to be implied by and included within the scope of the Contract to the same extent and in the same manner as if specifically described in the Contract. Unless otherwise expressly provided in the Contract, Vendor will furnish all of its own necessary management, supervision, labor, facilities, furniture, computer and

Page 20 of 21 Version 5.4.2026 telecommunications equipment, software, supplies and materials necessary for the Vendor to provide and deliver the Services and Deliverables.

c) Vendor warrants that it has the financial capacity to perform and to continue perform its obligations under the Contract; that Vendor has no constructive or actual knowledge of an actual or potential legal proceeding being brought against Vendor that could materially adversely affect performance of this Contract; and that entering into this Contract is not prohibited by any contract, or order by any court of competent jurisdiction.

d) Warranty as to Equipment; Hardware. Vendor warrants that the equipment and hardware that it provides pursuant to this Contract shall be free from defects in materials, in good working order and be maintained in good working order.

7) SOFTWARE LICENSE (for internal embedded software, firmware and unless otherwise provided in the State’s solicitation document, or in an attachment hereto): Deliverables comprising goods, equipment or products (hardware) may contain software for internal operation, or as embedded software or firmware that is generally not sold or licensed as a severable software product. Software may be provided on separate media, such as floppy diskettes or CD-ROM, or may be included within the hardware at or prior to delivery. Such software is proprietary, copyrighted, and may also contain valuable trade secrets and may be protected by patents. Vendor grants the State a license to use the Code (or any replacement provided) on, or in conjunction with, only the Deliverables purchased, or with any system identified in the solicitation documents. The State shall have a worldwide, nonexclusive, non-sublicensable license to use such software and/or documentation for its internal use. The State may make and install copies of the software to support the authorized level of use. Provided, however that if the hardware is inoperable, the software may be copied for temporary use on other hardware. The State shall promptly affix to any such copy the same proprietary and copyright notices affixed to the original. The State may make one copy of the software for archival, back-up or disaster recovery purposes. The license set forth in this Paragraph shall terminate immediately upon the State’s discontinuance of the use of the equipment on which the software is installed. The software may be transferred to another party only with the transfer of the hardware. If the hardware is transferred, the State shall i) destroy all software copies made by the State, ii) deliver the original or any replacement copies of the software to the transferee, and iii) notify the transferee that title and ownership of the software and the applicable patent, trademark, copyright, and other intellectual property rights shall remain with Vendor, or Vendor’s licensors. The State shall not disassemble, decompile, reverse engineer, modify, or prepare derivative works of the embedded software, unless permitted under the solicitation documents.

8) MAINTENANCE/SUPPORT SERVICES: Unless otherwise mutually provided herein, for the first year after the expiration of any warranty coverage (and for all subsequent Contract years, for which Support is purchased), Vendor agrees to provide the following Support Services for the Hardware and any Software provided with the Deliverables for any years in which the applicable support fees are paid, which may be more particularly described, e.g., under part numbers, in the Furnish & Deliver Table, above:

HARDWARE/EQUIPMENT:

a) Basic Services. The Vendor will provide at least normal and usual Hardware support and maintenance Services generally provided to customers in a similar program, position or setting consistent with and subject to the payment of the support and maintenance fees agreed upon in this Contract, all as indicated by part numbers in the Furnish and Deliver Table, above. The Vendor warrants to the State that all items furnished will be new (unless otherwise requested in this IFB), of good material and workmanship, and agrees to repair or replace any items which fail to comply with the specifications by reason of defective material or workmanship under normal use, free of State’s negligence or accident for one year from date of installation. Such repair or replacement shall include any transportation costs free of any charge to the State. This statement is not intended to limit any additional coverage, which may normally be associated with a product, such as any “hot switch” or similar replacement warranty program applicable as indicated by the Vendor’s support description in the Furnish & Deliver Table, above. Any available warranties applicable to replacement Hardware equipment or parts will be passed on to the using agency.

Page 21 of 22 Version 5.4.2026

b) Telephone Assistance. Vendor shall provide the State with telephone access to technical support engineers for assistance in the proper installation and use of the Software, and to report and resolve Support problems, during normal business hours, 8:00 AM - 5:00 PM Eastern Standard Time, Monday-Friday.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .