1-U46 728-26 Fox Meadow ES Heat Pump DRAWINGS 100% OTB SET.pdf

PDF 23 MB Posted Feb 2, 2026

Attached to: HEAT PUMP REPLACEMENT AT FOX MEADOW ELEMENTARY SCHOOL; PROJECT NO. 728-26
Solicitation number: 404 - 25/26
Issued by: Kane County, Illinois

About this file

Written by GovTribe AI · Feb 3, 2026

Heat Pump Replacement Project Summary

This is a comprehensive set of technical drawings and specifications for a heat pump replacement project issued by the Board of Education of School District U-46 in Kane County, Illinois for Fox Meadow Elementary School located at 1275 Jenna Drive, South Elgin, Illinois 60177. The project, designated as Project No. 728-26, involves the complete replacement of the existing heat pump systems and all associated mechanical, electrical, and fire protection work throughout the facility. The scope includes disconnection and removal of existing equipment, installation of new roof-top units, fan-powered boxes with hot water reheat coils, condensing units, boiler systems, circulation pumps, cabinet heaters, ductwork, piping, electrical circuits, lighting controls, and fire alarm components. The drawings are dated February 2, 2026 and include 100% design documents prepared by MSA (Mechanical Systems Associates) with office located at 111 S. Virginia Street, Crystal Lake, Illinois 60014. The project encompasses mechanical demolition across two floors, installation of new ventilation systems with variable air volume capabilities, multiple roof-top units (RT-1 through RT-5), and comprehensive electrical and controls integration with the existing building management system.

The drawings indicate that roof-top units, curbs, and vision screens are being pre-purchased by the owner, with the mechanical contractor responsible for receiving, unloading, inspecting, craning into place, making modifications, and completing all final connections. The project requires coordination with an approved roofing contractor (Elens & Maichin Roofing and Sheet Metal, Inc., 815-727-2689) to maintain existing roof warranties. All work must comply with the 2021 International Energy Conservation Code, 2023 National Electrical Code, and Illinois Building Code requirements. The contractor is responsible for all permitting, fees, licenses, and approvals at its own expense. Submittals required include equipment specifications, operation and maintenance manuals, shop drawings, flushing and disinfection reports, as-built drawings, training schedules, and itemized deficiency lists prior to final inspection. The contractor must guarantee all work and materials for two years after final acceptance and provide manufacturer-certified operating technician instruction within 90 days of certificate of occupancy issuance. No specific bid due date, contract award date, or pricing information is included in these technical design documents.

View the file

Other files

File	Type	Posted
2-U46 728-26 Fox Meadow ES Heat Pump PROJ MANUAL 100% OTB SET.pdf	PDF	Feb 2, 2026
3-Zoom Credentials - Fox Meadow Heat Pump.pdf	PDF	Feb 2, 2026
4-Fox Meadow Heat Pump Invitation to Bid.docx (1).pdf	PDF	Feb 2, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

PROJECT

COVER SHEET

Sheet No.:

U46 Project No.:

728-26

Date:

February 2, 2026

Sheet Title:

P ro j.

N o.

V irg in ia S tre et

C ry st al L ak e, Il lin oi s

O ffi ce

-7

-8

Fa x

8-w w w

.m sa

-c e.

co m

AutoCAD SHX Text

355 EAST CHICAGO STREET

AutoCAD SHX Text

ELGIN, ILLINOIS 60120

AutoCAD SHX Text

SCHOOL DISTRICT U-46

AutoCAD SHX Text

FEBRUARY 2, 2026

AutoCAD SHX Text

%%UDRAWINGS INDEX:

AutoCAD SHX Text EFO-MD1.1 - FIRST FLOOR PLAN - AREA A - MECHANICAL DEMOLITION EFO-MD1.2 - FIRST FLOOR PLAN - AREA B - MECHANICAL DEMOLITION EFO-MD1.3 - ENLARGED BOILER ROOM PLAN - MECHANICAL DEMOLITION EFO-MD2.1 - SECOND FLOOR PLAN - MECHANICAL DEMOLITION EF0-M0.0 - MECHANICAL NOTES EFO-MV1.1 - FIRST FLOOR PLAN - AREA A - MECH. VENTILATION NEW WORK EFO-MV1.2 - FIRST FLOOR PLAN - AREA B - MECH. VENTILATION NEW WORK EFO-MV2.1 - SECOND FLOOR PLAN - MECH. VENTILATION NEW WORK EFO-MH1.1 - FIRST FLOOR PLAN - AREA A - MECH. PIPING NEW WORK EFO-MH1.2 - FIRST FLOOR PLAN - AREA B - MECH. PIPING NEW WORK EFO-MH1.3 - ENLARGED BOILER ROOM PLAN - MECHANICAL NEW WORK EFO-MH2.1 - SECOND FLOOR PLAN - MECH. PIPING NEW WORK EFO-M2.2 - MECHANICAL ROOF PLAN EFO-M3.0 - MECHANICAL EQUIPMENT SCHEDULES EFO-M3.1 - MECHANICAL EQUIPMENT SCHEDULES EFO-M4.0 - MECHANICAL DETAILS & SYMBOLS LIST EFO-M4.1 - MECHANICAL DETAILS EFO-FP1.1 - FIRST FLOOR PLAN - AREA A - FIRE PROTECTION EFO-FP1.2 - FIRST FLOOR PLAN - AREA B - FIRE PROTECTION EFO-FP2.1 - SECOND FLOOR PLAN - FIRE PROTECTION EFO-ED1.0 - ELECTRICAL DEMOLITION NOTES EFO-ED1.1 - FIRST FLOOR PLAN - AREA A - ELECTRICAL DEMOLITION EFO-ED1.2 - FIRST FLOOR PLAN - AREA B - ELECTRICAL DEMOLITION EFO-ED2.1 - SECOND FLOOR PLAN - ELECTRICAL DEMOLITION EFO-ED4.1 - FIRST FLOOR PLAN - AREA A - LIGHTING DEMOLITION EFO-ED4.2 - FIRST FLOOR PLAN - AREA B - LIGHTING DEMOLITION EFO-ED4.3 - SECOND FLOOR PLAN - ELECTRICAL DEMOLITION EFO-E1.0 - ELECTRICAL SYMBOLS, GENERAL, AND NEW WORK NOTES EFO-E1.1 - FIRST FLOOR PLAN - AREA A - ELECTRICAL NEW WORK EFO-E1.2 - FIRST FLOOR PLAN - AREA B - ELECTRICAL NEW WORK EFO-E2.1 - SECOND FLOOR PLAN - ELECTRICAL NEW WORK EFO-E3.1 - ROOF PLAN - AREA A - ELECTRICAL NEW WORK EFO-E3.2 - ROOF PLAN - AREA B - ELECTRICAL NEW WORK EFO-E3.3 - ELECTRICAL DETAILS EFO-E4.1 - FIRST FLOOR PLAN - AREA A - LIGHTING NEW WORK EFO-E4.2 - FIRST FLOOR PLAN - AREA B - LIGHTING NEW WORK EFO-E4.3 - SECOND FLOOR PLAN - LIGHTING NEW WORK EFO-E5.0 - FIRE ALARM SYSTEM NOTES AND DETAILS EFO-E5.1 - FIRE ALARM SYSTEM RISER DIAGRAM EFO-E6.0 - ELECTRICAL RISER DIAGRAM EFO-E6.1 - ELECTRICAL SCHEDULES EFO-E6.2 - FIRST FLOOR PLAN - AREA A - CORRIDOR LIGHT ZONING PLAN EFO-E6.3 - SECOND FLOOR PLAN - CORRIDOR LIGHT ZONING PLAN EFO-E6.4 - LIGHTING CONTROL SCHEDULE AND NOTES EFO-A0.0 - GENERAL TRADE PLAN NOTES & SITE PLAN EFO-A1.1 - FIRST FLOOR PLAN - AREA A EFO-A1.2 - FIRST FLOOR PLAN - AREA B EFO-A2.1 - SECOND FLOOR PLAN

AutoCAD SHX Text N

AutoCAD SHX Text

LOCATION MAPS

AutoCAD SHX Text

FOX MEADOW ELEMENTARY SCHOOL - U-46 728-26

AutoCAD SHX Text

HEAT PUMP REPLACEMENT

AutoCAD SHX Text

EFO- G0.1

AutoCAD SHX Text

FOX MEADOW ELEMENTARY SCHOOL 1275 JENNA DR. SOUTH ELGIN, IL 60177

AutoCAD SHX Text

SCHOOL DISTRICT U46 355 EAST CHICAGO STREET ELGIN, IL 60120

AutoCAD SHX Text

HEAT PUMP REPLACEMENT AT:

AutoCAD SHX Text

FOX MEADOW ELEM. SCHOOL 1275 JENNA DR., SOUTH ELGIN, IL. 60177

AutoCAD SHX Text

ELGIN, ILLINOIS 60120

AutoCAD SHX Text

SCHOOL DISTRICT U-46

AutoCAD SHX Text

355 EAST CHICAGO STREET

AutoCAD SHX Text U-46 P.N. 728-26

AutoCAD SHX Text Revisions:

FIRST FLOOR PLAN -

AREA A - MECHANICAL

DEMOLITION

Sheet No.:

U46 Project No.:

728-26

Date:

February 2, 2026

Sheet Title:

P ro j.

N o.

V irg in ia S tre et

C ry st al L ak e, Il lin oi s

O ffi ce

-7

-8

Fa x

8-w w w

.m sa

-c e.

co m

J.C.

CLASSROOM

BOY'S

GIRL'S

133B

CONFERENCE

KITCHEN

OFFICE

133A

PRINCIPAL

KINDERGARTEN

OUTDOOR

STORAGE

GYMNASIUM

OFFICE

STORAGE STORAGE

CLASSROOM

WOMEN'S

MEN'S

102A

TOILET

103A

TOILET

133E

TOILET

BOY'S

GIRL'S

BOY'S

GIRL'S

STAIR

BOILER

ELEC.

PLANNING AREA

115B

STORAGE B

STORAGE

CORRIDOR

VESTIBULE

STORAGE

102B

STORAGE

103B

STORAGE

115A

STORAGE

LOBBY

133C

ASSISTANT

PRINCIPAL

133D

ASSISTANT

PRINCIPAL

120C

GYM

STORAGE

120B

GYM

OFFICE

120A

REC.

OFFICE

120D

SPRINKLER

115D

ELEV.

EQUIP.

MAIL/CLERICAL

GENERAL

STORAGE

COMMONS

DATA/

STORAGE

OFFICE

SPEECH

THERAPY

103C

PLANNING AREA

DISCONNECT & REMOVE EXISTING HEAT PUMP, CONTROLS, T-STAT, CONDENSATE DRAIN PIPING, CONDENSATE RECEIVER & RELATED APPURTENANCES COMPLETE. REMOVE ALL SWS & SWR PIPING, VALVES & HANGERS. CUT & REMOVE DISCHARGE DUCTWORK AT RECONNECTION POINT. DUCTWORK DOWNSTREAM TO DIFFUSERS TO

REMAIN.

SEE ENLARGED BOILER

ROOM PLAN.

DISCONNECT & REMOVE ALL EXISTING SUPPLY AIR DIFFUSERS AND RETURN AIR GRILLES. DISCONNECT & REMOVE EXISTING FLEX DUCTWORK AND PORTION OF DUCTWORK BACK TO RECONNECTION POINT.

VERIFY EXISTING DUCTWORK ROUTING & SIZES IN FIELD. THOROUGHLY CLEAN DUCTWORK AND MODIFY FOR RECONNECTION TO NEW DIFFUSERS. ANY PORTION OF INSULATION DAMAGED SHALL BE REPLACED WITH NEW

PER SPECIFICATION.

DISCONNECT & REMOVE EXISTING SUPPLY AIR DUCTWORK FROM DEMO ROOF TOP UNIT, DAMPERS & RELATED APPURTENANCES COMPLETE. SAW-CUT CHASE AS REQUIRED. SEAL, PATCH & PAINT WALLS TO MATCH

EXISTING.

DISCONNECT & REMOVE ALL EXISTING SWS & SWR PIPING IN THE ENTIRE BUILDING, VALVES, HANGERS, RISERS UP TO FLOOR ABOVE & RELATED APPURTENANCES COMPLETE. VERIFY ALL PIPING ROUTING IN FIELD.

DISCONNECT & REMOVE ALL EXISTING SUPPLY AIR DIFFUSERS, RETURN AIR GRILLES AND ALL EXISTING

DUCTWORK IN THIS ROOM COMPLETE.

DISCONNECT & REMOVE EXISTING CABINET HEATER, CONTROLS, T-STAT, WIRING, ALL BRANCH HOT WATER SUPPLY & RETURN PIPING, VALVES & RELATED APPURTENANCES COMPLETE. REMOVE BRANCH PIPING BACK TO

MAINS AND CAP. SEAL, PATCH & PAINT WALLS TO MATCH EXISTING.

AutoCAD SHX Text

%%UFIRST FLOOR PLAN - AREA A - MECHANICAL DEMOLITION

AutoCAD SHX Text

SCALE: 1/8"=1'-0"

AutoCAD SHX Text

EFO- MD1.1

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

HEAT PUMP REPLACEMENT AT:

AutoCAD SHX Text

FOX MEADOW ELEM. SCHOOL 1275 JENNA DR., SOUTH ELGIN, IL. 60177

AutoCAD SHX Text

ELGIN, ILLINOIS 60120

AutoCAD SHX Text

SCHOOL DISTRICT U-46

AutoCAD SHX Text

355 EAST CHICAGO STREET

AutoCAD SHX Text U-46 P.N. 728-26

AutoCAD SHX Text Revisions:

AutoCAD SHX Text N

AutoCAD SHX Text

%%UMECHANICAL DEMOLITION PLAN NOTES

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text 1"

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

SWR

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

SWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 3"

AutoCAD SHX Text 1"

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 4"

AutoCAD SHX Text 3"

AutoCAD SHX Text 4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text 4"

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 4"

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text T

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 4"

AutoCAD SHX Text 2"

AutoCAD SHX Text 4"

AutoCAD SHX Text 2"

AutoCAD SHX Text 4"

AutoCAD SHX Text 3"

AutoCAD SHX Text 4"

AutoCAD SHX Text 3"

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text 4"

AutoCAD SHX Text 3"

AutoCAD SHX Text 4"

AutoCAD SHX Text T

AutoCAD SHX Text 1"

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 1"

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text 4"

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 2"

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text T

AutoCAD SHX Text 2"

AutoCAD SHX Text T

AutoCAD SHX Text

AREA B - MECHANICAL

DEMOLITION

Sheet No.:

U46 Project No.:

728-26

Date:

February 2, 2026

Sheet Title:

P ro j.

N o.

V irg in ia S tre et

C ry st al L ak e, Il lin oi s

O ffi ce

-7

-8

Fa x

8-w w w

.m sa

-c e.

co m

121A

TOILET

122A

TOILET

T10

GIRL'S

BOY'S

STAIR

PLANNING

AREA

PLANNING

AREA

CLASSROOM

MECH.

CORRIDOR

VESTIBULE

CLASSROOM

STOR.

J.C.

CLASSROOM

COURTYARD

REMAIN. DISCONNECT & REMOVE SUPPLY INLET FROM MAKE-UP AIR UNIT & RETURN DUCT.

DISCONNECT & REMOVE ALL EXISTING SUPPLY AIR DIFFUSERS AND RETURN AIR GRILLES. DISCONNECT & REMOVE EXISTING FLEX DUCTWORK AND PORTION OF DUCTWORK BACK TO RECONNECTION POINT.

VERIFY EXISTING DUCTWORK ROUTING & SIZES IN FIELD. THOROUGHLY CLEAN DUCTWORK AND MODIFY FOR RECONNECTION TO NEW DIFFUSERS. ANY PORTION OF INSULATION DAMAGED SHALL BE REPLACED WITH NEW

PER SPECIFICATION.

DISCONNECT & REMOVE EXISTING SUPPLY AIR DUCTWORK FROM DEMO ROOF TOP UNIT, DAMPERS & RELATED APPURTENANCES COMPLETE. SAW-CUT CHASE AS REQUIRED. SEAL, PATCH & PAINT WALLS TO MATCH

EXISTING.

DISCONNECT & REMOVE ALL EXISTING SWS & SWR PIPING IN THE ENTIRE BUILDING, VALVES, HANGERS, RISERS UP TO FLOOR ABOVE & RELATED APPURTENANCES COMPLETE. VERIFY ALL PIPING ROUTING IN FIELD.

DISCONNECT & REMOVE ALL EXISTING SUPPLY AIR DIFFUSERS, RETURN AIR GRILLES AND ALL EXISTING

DUCTWORK IN THIS ROOM COMPLETE.

DISCONNECT & REMOVE EXISTING MAKE-UP AIR UNIT, CONTROLS, HANGERS, ALL DUCTWORK, GOOSENECK ON ROOF, ROOF CURB, DAMPERS & RELATED APPURTENANCES COMPLETE. SEAL & PATCH OPENINGS WEATHER TIGHT TO MATCH EXISTING. ALL ROOFING WORK MUST BE PERFORMED BY CERTIFIED ROOFING CONTRACTOR

APPROVED BY THE OWNER.

TO DO SO AT THE OWNER'S CONVENIENCE DURING OFF HOURS. CONTRACTOR

SHALL EXAMINE EXISTING PIPING, CONDUITS, STRUCTURAL SUPPORTING

EXAMINATION OF ALL LOCATIONS WHERE NEW WORK IS TO BE INSTALLED AND

CONTRACTOR SHALL INSPECT THE PREMISES AND MAKE A DETAILED

CONTRACTOR SHALL ADAPT HIS WORK TO MEET ALL ACTUAL CONDITIONS ON

EXISTING DUCTS, PIPES, CONDUITS AND BEAMS NOT SHOWN ON PLANS.

AS POSSIBLE, CONTRACTOR SHALL ADJUST HIS WORK AS REQUIRED TO AVOID

EXISTING BUILDING HAS BEEN INDICATED ON THE DRAWINGS AS ACCURATELY

WHILE THE SIZE AND LOCATION OF NEW WORK AND EQUIPMENT IN THE

MIGHT HAVE BEEN REASONABLY FORESEEN BY AN INSPECTION OF THESE

PRIOR TO BIDDING. NO EXTRAS WILL BE ALLOWED FOR WORK WHICH

SHALL THOROUGHLY FAMILIARIZE THEMSELVES WITH ACTUAL JOB CONDITIONS

THE CONTRACTORS SHALL VISIT AND INSPECT THE EXISTING BUILDING AND

INTERFERED WITH, CONTRACTOR SHALL REROUTE AND RECONNECT ALL SUCH

MECHANICAL EQUIPMENT IN AREA OF EXISTING BUILDING NOT BE ALTERED IS

WHERE THE EXISTING PIPING, CONDUIT OR DUCTWORK SERVING ANY EXISTING

ALL CUTTING AND PATCHING AS REQUIRED FOR WORK TO BE BY THE CONTRACTOR.

COORDINATE WORK WITH OTHER TRADES TO AVOID CONFLICTS AND DELAYS.

THE EXISTING PREMISES.

BEAMS, ETC.

PREMISES.

NOTES RE: INSPECTING EXISTING BUILDING

PIPES OR DUCTWORK WITH PRIOR APPROVAL FROM ENGINEER.

SHALL PROVIDE OWNER ADVANCE NOTICE IN WRITING MINIMUM 3 BUSINESS DAYS

REFER TO SPECIFICATIONS.

VERIFY EXISTING CONDITIONS AND LOCATIONS IN FIELD PRIOR TO

IT SHALL BE THE CONTRACTOR'S RESPONSIBILITY TO MAINTAIN THE EXISTING

RECONNECT SUCH ITEMS IN PROPER OPERATING CONDITION AT NEW LOCATIONS.

INTERFERED WITH, OBSTRUCT OR ARE OBSTRUCTED BY THESE ALTERATIONS.

MATERIALS, AND ALL OTHER MECHANICAL ITEMS WHICH INTERFERE OR ARE

DISCONNECT, REMOVE OR RELOCATE EXISTING MECHANICAL EQUIPMENT,

OBSOLETE BY THESE ALTERATIONS AND ADDITIONS. THESE ARE THE PROPERTY

EQUIPMENT AND ALL OTHER MECHANICAL ITEMS WHICH ARE RENDERED

DISCONNECT AT SOURCE AND REMOVE EXISTING ELECTRICAL MATERIALS AND

AND ELECTRICAL ITEMS AND EQUIPMENT, BOTH NEW AND EXISTING, AS MAY

MAKE NECESSARY MODIFICATIONS AND ADJUSTMENTS TO ALL MECHANICAL

FROM PERFORMING THE WORK REQUIRED UNDER THIS CONTRACT.

BIDDING. FAILURE TO DO SO SHALL NOT RELIEVE CONTRACTOR

THE CONTRACTOR SHALL CONSULT WITH THE OWNER AND MAKE ARRANGEMENTS

IF IT IS ABSOLUTELY NECESSARY TO SHUT DOWN THE FACILITY AT ANY TIME,

BUILDING IN MECHANICAL OPERATION AT ALL TIMES DURING OCCUPIED PERIOD.

NOTES RE: EXISTING CONDITIONS

BE REQUIRED BY THESE ALTERATIONS AND ADDITIONS.

PRIOR TO SHUT DOWN.

INDICATES EXISTING TO REMAIN.

INDICATES EXISTING TO BE DISCONNECTED

AND REMOVED.

EXISTING TO REMAIN.E.T.R.

IN WORKING CONDITION TO THE OWNER'S STOCK AT THE DISCRETION OF THE

OF THE OWNER AND SHALL EITHER BE REMOVED FROM THE SITE OR RETURNED

OWNER.

WITH OWNER.

OF ALL SYSTEMS REQUIRED FOR EXECUTION OF WORK. COORDINATE PROCEDURES

CONTRACTOR IS RESPONSIBLE FOR ISOLATING, DRAINING, REFILLING & VENTING 9.

CLEARANCE REQUIRED PRIOR TO BIDDING. CONTRACTOR SHALL BE RESPONSIBLE

TO THE ATTENTION OF THE ARCHITECT ANY LACK OF ANY NECESSARY SPACE OR

CONTRACTOR AFTER INSPECTING THE PREMISES AND THE DRAWINGS SHALL CALL

FOR ALL NECESSARY CHANGES IF HE NEGLECTS TO DO SO.

DISCONNECT & REMOVE EXISTING RELIEF AIR HOOD, DAMPERS, CONTROLS, ALL DUCTWORK, ROOF CURB & RELATED APPURTENANCES COMPLETE. SEAL & PATCH OPENINGS WEATHER TIGHT TO MATCH EXISTING.

ALL ROOFING WORK MUST BE PERFORMED BY CERTIFIED ROOFING CONTRACTOR APPROVED BY THE OWNER.

DISCONNECT & REMOVE EXISTING CABINET HEATER, CONTROLS, T-STAT, WIRING, ALL BRANCH HOT WATER SUPPLY & RETURN PIPING, VALVES & RELATED APPURTENANCES COMPLETE. REMOVE BRANCH PIPING BACK TO

MAINS AND CAP. SEAL, PATCH & PAINT WALLS TO MATCH EXISTING.

AutoCAD SHX Text

%%UFIRST FLOOR PLAN - AREA B - MECHANICAL DEMOLITION

AutoCAD SHX Text

SCALE: 1/8"=1'-0"

AutoCAD SHX Text

EFO- MD1.2

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

HEAT PUMP REPLACEMENT AT:

AutoCAD SHX Text

FOX MEADOW ELEM. SCHOOL 1275 JENNA DR., SOUTH ELGIN, IL. 60177

AutoCAD SHX Text

ELGIN, ILLINOIS 60120

AutoCAD SHX Text

SCHOOL DISTRICT U-46

AutoCAD SHX Text

355 EAST CHICAGO STREET

AutoCAD SHX Text U-46 P.N. 728-26

AutoCAD SHX Text Revisions:

AutoCAD SHX Text N

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text T

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 4"

AutoCAD SHX Text 2"

AutoCAD SHX Text T

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 4"

AutoCAD SHX Text 1"

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text 3/4"

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 1"

AutoCAD SHX Text T

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 2"

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text 1"

AutoCAD SHX Text T

AutoCAD SHX Text 1"

AutoCAD SHX Text 1-1/4"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text 1"

AutoCAD SHX Text T

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text 2"

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text T

AutoCAD SHX Text

%%UMECHANICAL DEMOLITION PLAN NOTES

AutoCAD SHX Text

%%UGENERAL MECHANICAL

AutoCAD SHX Text

%%UDEMOLITION NOTES:

AutoCAD SHX Text

%%ULEGENDS:

AutoCAD SHX Text

1-1/4"

1" HWS & HWR UP

TO UNIT HEATER

ON FLOOR ABOVE

TO REMAIN.

VERIFY IN FIELD.

OUTDOOR

STORAGE

BOILER

ELEC.

CORRIDOR

ENLARGED BOILER

ROOM PLAN - MECH.

DEMOLITION

Sheet No.:

U46 Project No.:

728-26

Date:

February 2, 2026

Sheet Title:

P ro j.

N o.

V irg in ia S tre et

C ry st al L ak e, Il lin oi s

O ffi ce

-7

-8

Fa x

8-w w w

.m sa

-c e.

co m

DISCONNECT & REMOVE EXISTING GAS FIRED, HOT WATER BOILER COMPLETE INCLUDING ALL CONTROLS, PANELS AND PIPING. BREAK UP

AND REMOVE ALL EXISTING CONCRETE PADS. PATCH AND LEVEL FLOOR TO MATCH EXISTING.

DISCONNECT & REMOVE ALL EXISTING GAS PIPING, VALVES, HANGERS FROM BOILERS BACK TO MAIN PIPING AND CAP. REMOVE RELATED GAS VENT OUT TO EXTERIOR COMPLETE. SEAL & PATCH OPENINGS WEATHER TIGHT TO MATCH EXISTING.

DISCONNECT & REMOVE EXISTING BREACHING AND FLUE FROM BOILERS UP THRU ROOF COMPLETE. SEAL & PATCH FLOOR AND ROOF OPENINGS WEATHER TIGHT TO MATCH EXISTING. ALL ROOFING WORK MUST BE PERFORMED BY CERTIFIED ROOFING CONTRACTOR

APPROVED BY THE OWNER.

DISCONNECT & REMOVE EXISTING BASE MOUNTED CIRCULATION PUMPS COMPLETE, INCLUDING CONCRETE PADS AND INERTIA BASE, PIPING SPECIALTIES, VALVES AND CONTROLS COMPLETE.

DISCONNECT & REMOVE EXISTING AIR SEPARATOR COMPLETE INCLUDING HANGERS, VALVE AND PIPING COMPLETE.

DISCONNECT & REMOVE EXISTING EXPANSION TANKS, VALVES, AND PIPING COMPLETE.

DISCONNECT & REMOVE ALL EXISTING SWS & SWR PIPING, VALVES, HANGERS, RISERS UP TO FLOOR ABOVE & RELATED APPURTENANCES

COMPLETE. VERIFY ALL PIPING ROUTING IN FIELD.

DISCONNECT & REMOVE EXISTING BOILER FEED WATER PIPING, VALVES, CHEMICAL FILTRATION AND SPECIALTIES COMPLETE BACK TO POINT

OF RECONNECTION.

EXISTING COMBUSTION AIR LOUVER TO REMAIN. DISCONNECT & REMOVE EXISTING DUCT, DAMPERS, CONTROLS AND ALL RELATED

APPURTENANCES COMPLETE.

DISCONNECT & REMOVE EXISTING HEAT EXCHANGER, ALL PIPING, VALVES, HANGERS & RELATED APPURTENANCES COMPLETE.

DISCONNECT & REMOVE EXISTING HWS & HWR PIPING, VALVES, HANGERS FROM BOILERS & RELATED APPURTENANCES COMPLETE BACK TO

RECONNECTION POINTS. VERIFY ALL PIPING ROUTING, SIZES & TYPES IN FIELD.

DISCONNECT & REMOVE ALL EXISTING PIPING, VALVES, HANGERS SERVING DEMO COOLING TOWER, PUMPS, MAKE-UP WATER, METER, DRAIN & RELATED APPURTENANCES COMPLETE. VERIFY ALL PIPING ROUTING, SIZES & TYPES IN FIELD. SEAL & PATCH FLOOR AND ROOF OPENINGS WEATHER TIGHT TO MATCH EXISTING. ALL ROOFING WORK MUST BE PERFORMED BY CERTIFIED ROOFING CONTRACTOR APPROVED BY THE

OWNER.

E.T.R.

E.T.R. E.T.R.

EXISTING INCOMING

GAS SERVICE TO

REMAIN.

EXISTING GAS UP TO

EMERGENCY

GENERATOR & DOM.

HOT WATER HEATER

ON FLOOR ABOVE TO

REMAIN.

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

HWS

AutoCAD SHX Text

HWR

AutoCAD SHX Text

%%UENLARGED BOILER ROOM PLAN - MECHANICAL DEMOLITION

AutoCAD SHX Text

SCALE: 1/4"=1'-0"

AutoCAD SHX Text

EFO- MD1.3

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

HEAT PUMP REPLACEMENT AT:

AutoCAD SHX Text

FOX MEADOW ELEM. SCHOOL 1275 JENNA DR., SOUTH ELGIN, IL. 60177

AutoCAD SHX Text

ELGIN, ILLINOIS 60120

AutoCAD SHX Text

SCHOOL DISTRICT U-46

AutoCAD SHX Text

355 EAST CHICAGO STREET

AutoCAD SHX Text U-46 P.N. 728-26

AutoCAD SHX Text Revisions:

AutoCAD SHX Text N

AutoCAD SHX Text

%%UMECHANICAL DEMOLITION PLAN NOTES:

AutoCAD SHX Text

AutoCAD SHX Text G

SECOND FLOOR PLAN -

MECHANICAL

DEMOLITION

Sheet No.:

U46 Project No.:

728-26

Date:

February 2, 2026

Sheet Title:

P ro j.

N o.

V irg in ia S tre et

C ry st al L ak e, Il lin oi s

O ffi ce

-7

-8

Fa x

8-w w w

.m sa

-c e.

co m

OPEN TO

GYMNASIUM

BELOW

STAIR

LEARNING CENTER

CORRIDOR

T14

BOY'S

T13

GIRL'S

T12

TOILET

STORAGE

DATA/

STORAGE

T16

BOY'S

T15

GIRL'S

T17

BOY'S

T18

GIRL'S

J.C. T19

TOILET

PLANNING

AREA

PLANNING

AREA

ART

MUSIC BAND

TEACHER'S LOUNGE

215B

TOILET

202A

ART

OFFICE

202B

ART

STORAGE

CLASSROOM

MECH.

COOLING

TOWER

STORAGE STORAGE

217A

STORAGE

DATA/

STORAGE

217B

DATA/

STORAGE

PLANNING

AREA

READING

ROOM

COMPUTER LAB

217C

OFFICE

214A

MUSIC

OFFICE

ORCHESTRA

215A

TEL.

DN.

REMAIN.

DISCONNECT & REMOVE ALL EXISTING SUPPLY AIR DIFFUSERS AND RETURN AIR GRILLES. DISCONNECT & REMOVE EXISTING FLEX DUCTWORK AND PORTION OF DUCTWORK BACK TO RECONNECTION POINT.

VERIFY EXISTING DUCTWORK ROUTING & SIZES IN FIELD. THOROUGHLY CLEAN DUCTWORK AND MODIFY FOR RECONNECTION TO NEW DIFFUSERS. ANY PORTION OF INSULATION DAMAGED SHALL BE REPLACED WITH NEW

PER SPECIFICATION.

DISCONNECT & REMOVE EXISTING ROOF TOP UNIT, CONTROLS, ROOF CURB, ALL AIR DUCTWORK, DAMPERS & RELATED APPURTENANCES COMPLETE. SAW-CUT CHASE AS REQUIRED. SEAL & PATCH ROOF OPENINGS WITH STEEL DECK AND INSULATION WEATHER TIGHT AND PAINT WALLS TO MATCH EXISTING. ALL ROOFING WORK

MUST BE PERFORMED BY CERTIFIED ROOFING CONTRACTOR APPROVED BY THE OWNER.

DISCONNECT & REMOVE ALL EXISTING SWS & SWR PIPING IN THE ENTIRE BUILDING, VALVES, HANGERS, RISERS UP FROM FLOOR BELOW & RELATED APPURTENANCES COMPLETE. VERIFY ALL PIPING ROUTING IN FIELD. SEAL &

PATCH OPENINGS TO MATCH EXISTING.

DISCONNECT & REMOVE ALL EXISTING SUPPLY AIR DIFFUSERS, RETURN AIR GRILLES AND ALL EXISTING

DUCTWORK IN THIS ROOM COMPLETE.

DISCONNECT & REMOVE EXISTING COOLING TOWER, SUPPORTING FRAMES, ALL EXISTING PIPING, VALVES, HANGERS, PUMPS, MAKE-UP WATER, METER, DRAIN & RELATED APPURTENANCES COMPLETE. VERIFY ALL PIPING ROUTING, SIZES & TYPES IN FIELD. SEAL & PATCH FLOOR AND ROOF OPENINGS WEATHER TIGHT TO MATCH EXISTING. ALL ROOFING WORK MUST BE PERFORMED BY CERTIFIED ROOFING CONTRACTOR APPROVED BY THE

OWNER.

DISCONNECT & REMOVE EXISTING BOILERS FLUE UP FROM FLOOR BELOW COMPLETE. SEAL & PATCH OPENING

TO MATCH EXISTING.

DISCONNECT & REMOVE EXISTING HEAT PUMP, CONTROLS, T-STAT, CONDENSATE DRAIN PIPING, CONDENSATE RECEIVE, ALL SWS & SWR PIPING, VALVES & HANGERS, ALL SUPPLY DUCTWORK, DIFFUSERS AND RELATED

APPURTENANCES COMPLETE. EXISTING RETURN AIR GRILLES TO REMAIN FOR RECONNECTION.

DISCONNECT & REMOVE EXISTING CABINET HEATER, CONTROLS, T-STAT, WIRING, ALL BRANCH HOT WATER SUPPLY & RETURN PIPING, VALVES & RELATED APPURTENANCES COMPLETE. REMOVE BRANCH PIPING BACK TO

MAINS AND CAP. SEAL, PATCH & PAINT WALLS TO MATCH EXISTING.

AutoCAD SHX Text

%%USECOND FLOOR PLAN - MECHANICAL DEMOLITION

AutoCAD SHX Text

SCALE: 1/8"=1'-0"

AutoCAD SHX Text

EFO- MD2.1

AutoCAD SHX Text

HEAT PUMP REPLACEMENT AT:

AutoCAD SHX Text

FOX MEADOW ELEM. SCHOOL 1275 JENNA DR., SOUTH ELGIN, IL. 60177

AutoCAD SHX Text

ELGIN, ILLINOIS 60120

AutoCAD SHX Text

SCHOOL DISTRICT U-46

AutoCAD SHX Text

355 EAST CHICAGO STREET

AutoCAD SHX Text U-46 P.N. 728-26

AutoCAD SHX Text Revisions:

AutoCAD SHX Text N

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text A

AutoCAD SHX Text

ROOF

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text 3"

AutoCAD SHX Text

SWS

AutoCAD SHX Text 6"

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text 3/4"

AutoCAD SHX Text 2-1/2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 3/4"

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWR

AutoCAD SHX Text

SWS

AutoCAD SHX Text T

AutoCAD SHX Text

%%UMECHANICAL DEMOLITION PLAN NOTES

AutoCAD SHX Text

NOTES

Sheet No.:

U46 Project No.:

728-26

Date:

February 2, 2026

Sheet Title:

P ro j.

N o.

V irg in ia S tre et

C ry st al L ak e, Il lin oi s

O ffi ce

-7

-8

Fa x

8-w w w

.m sa

-c e.

co m

1. CONTRACTOR SHALL BE RESPONSIBLE FOR VISITING THE SITE AND VERIFYING ALL EXISTING FIELD

CONDITIONS PRIOR TO SUBMISSION OF HIS BID.

A. CONTRACTOR SHALL FIELD VERIFY ALL EXISTING PIPING CONDITIONS, LOCATIONS, ROUTING & SIZES.

NO EXTRA COMPENSATION WILL BE ALLOWED FOR THE CONTRACTOR FAILING TO DO SO.

B. CONTRACTOR SHALL FAMILIARIZE THEMSELVES WITH PROCESS FOR ACCESSING SITE, ROOF, FLOOR AND CEILING SPACE. CONTRACTOR SHALL NOT CUT ANY OPENINGS, IN FAÇADE, ROOF, FLOORS, ETC

UNLESS COMPLETELY NECESSARY AND WITH PRIOR APPROVAL FROM THE OWNER AND ENGINEER.

CONTRACTOR SHALL BE RESPONSIBLE FOR ALL COSTS INCLUDING PATCHING AND REPAIR TO RETURN

TO ORIGINAL CONDITION.

2. THE CONTRACT DOCUMENTS ARE DIAGRAMMATIC IN NATURE AND INDICATE APPROXIMATE LOCATION OF EXISTING FIXTURES, PIPING AND EQUIPMENT. THE CONTRACTOR SHALL BE RESPONSIBLE FOR DETERMINING

THE ACTUAL LOCATIONS, SIZES AND ROUTING OF THE EXISTING, PIPING, ETC.

A. CONTRACTOR SHALL REMOVE EXISTING FIXTURES, EQUIPMENT, PIPING AND MATERIALS PERTAINING TO HIS CONTRACT AS SPECIFIED OR AS REQUIRED WHETHER SHOWN ON THE DRAWINGS OR NOT, TO

PREPARE FOR THE NEW WORK. OWNER TO BE PROVIDED WITH RIGHT OF REFUSAL FOR SALVAGE

VALUE OR ATTIC STOCK. IF OWNER REFUSES CONTRACTOR SHALL REMOVE ALL DEMOLISHED

MATERIALS FROM THE SITE AND PROPERLY DISPOSE.

B. CONTRACTOR SHALL PROVIDE LABOR, MATERIALS AND EQUIPMENT AND INSTALL SAME AS REQUIRED TO

ACCOMPLISH WORK AND PROVIDE COMPLETE AND FULLY FUNCTIONING SYSTEMS.

3. CONTRACTOR IS RESPONSIBLE FOR COORDINATING HIS WORK WITH THE WORK OF ALL OTHER TRADES AND MAKING ANY NECESSARY MODIFICATIONS TO HIS WORK AT NO ADDITIONAL COST, INCLUDING ALL OFFSETS.

4. CONTRACTOR SHALL BE RESPONSIBLE FOR RELOCATION OF ANY EXISTING MINOR INTERFERENCES, INCLUDING CONDUIT, HANGERS, ETC., AT NO ADDITIONAL COST.

5. CEILING SPACE IS USED AS A RETURN AIR PLENUM. ALL MATERIALS IN CEILING SPACE SHALL BE RATED FOR

RETURN AIR PLENUM PER THE ILLINOIS BUILDING CODE. COORDINATE WITH ALL TRADES.

PVC PIPING IS NOT PERMITTED IN THE CEILING SPACE.

6. ALL EQUIPMENT, MATERIALS, ETC. SHALL COMPLY WITH THE 2021 INTERNATIONAL ENERGY CONSERVATION

CODE (IECC).

7. ALL PERMITS, FEES, LICENSES, APPROVALS AND OTHER ARRANGEMENTS FOR WORK SHALL BE OBTAINED BY

THE CONTRACTOR AT HIS OWN EXPENSE.

8. SUBMITTALS

A. SUBMITTAL FIXTURES AND EQUIPMENT SPECIFICATIONS AND CUTS FOR REVIEW AND APPROVAL.

B. SUBMIT ASSEMBLED PRINTED INSTRUCTIONS FOR THE OPERATION AND MAINTENANCE OF EACH ITEM

INSTALLED ALONG WITH EQUIPMENT CUTS AND CONTROL WIRING DIAGRAMS.

C. SUBMIT ASSEMBLED PRINTED OPERATION AND MAINTENANCE MANUALS FOR DOMESTIC WATER

HEATING SYSTEMS, SUB-SYSTEMS AND EQUIPMENT INSTALLED ALONG WITH EQUIPMENT CUTS AND

CONTROL WIRING DIAGRAMS IN ACCORDANCE WITH SECTION C408.1.1 OF THE 2015 IECC.

D. SUBMIT COORDINATED SHOP DRAWINGS FOR REVIEW. THE SHOP DRAWINGS SHALL INDICATE PIPING

AND FIXTURE LOCATIONS AND MUST BE SUBMITTED PRIOR TO INSTALLATION.

E. CONTRACTOR SHALL SUBMIT FLUSHING AND DISINFECTION REPORTS REQUIRED BY OWNER FOR

APPROVAL.

F. CONTRACTOR TO SUBMIT AS-BUILT DRAWINGS FOR PIPING, INCLUDING FIXTURE LOCATIONS.

G. SUBMIT ITEMIZED DEFICIENCIES LIST PRIOR TO FINAL INSPECTION.

H. SUBMIT SCHEDULE FOR ALL REQUIRED TRAINING PRIOR TO FINAL INSPECTION.

I. SUBMIT EQUIPMENT AND CONTROL OPERATIONS AND MAINTENANCE MANUALS TO OWNER WITHIN 90

DAYS OF ISSUANCE OF CERTIFICATE OF OCCUPANCY.

11. CONTRACTOR SHALL GUARANTEE ALL WORK AND MATERIAL FOR TWO YEARS AFTER FINAL ACCEPTANCE

AGAINST ALL DEFECTS OF MATERIAL, EQUIPMENT AND WORKMANSHIP.

12. PROVIDE COMPETENT MANUFACTURER CERTIFIED OPERATING TECHNICIAN TO INSTRUCT THE OWNER IN THE OPERATION AND MAINTENANCE OF ALL INSTALLED EQUIPMENT AND TEMPERATURE CONTROLS.

TRAINING MUST BE COMPLETED WITHIN 90 DAYS OF THE ISSUANCE OF CERTIFICATE OF OCCUPANCY.

SUBMIT SCHEDULE OF TRAINING SESSIONS PRIOR TO FINAL INSPECTION.

13. PROVIDE ACCESS PANELS FOR ALL VALVES OR ANY PIECE OF EQUIPMENT WHEN NECESSARY TO LOCATE ABOVE NON-ACCESSIBLE CEILINGS. SUBJECT TO THE APPROVAL OF THE ENGINEER. NO EQUIPMENT SHALL

BE LOCATED DIRECTLY ABOVE WALLS.

14. PROVIDE ALL CORES/HOLES, OPENINGS, SLEEVES AND CAULKING FOR INSTALLATION OF THIS WORK.

CAULKING TO CONFORM TO FIRE RATING OF WALLS.

15. PROVIDE ISOLATION VALVES FOR ALL PIPING TAKE-OFFS FROM MAINS. FOR PIPING 3” AND SMALLER USE BRONZE 2-PIECE BALL VALVES. FOR PIPING 4” AND LARGER USE DUCTILE IRON BUTTERFLY VALVES.

16. PROVIDE ALL PATCHING OF FLOOR AND WALLS AND PAINTING OF WALLS TO MEET REQUIREMENTS IN

ARCHITECTURAL DRAWINGS AND SPECIFICATIONS.

17. PIPING SHALL RUN ABOVE CEILING AND CLEAR ANY EXISTING PIPING, LIGHTING FIXTURES, DUCTS, EQUIPMENT, ETC.

18. DISRUPTION OF ANY EXISTING SERVICE SHALL BE COORDINATED WITH THE OWNER AND SHALL BE PERFORMED AT A TIME AND MANNER SO AS TO CAUSE THE OWNER A MINIMUM OF INCONVENIENCE. NOTIFY

OWNER IN WRITING 5 BUSINESS DAYS PRIOR TO DISRUPTION OF SERVICE.

19. IN ALL CASES WHERE COPPER PIPE CONNECTIONS ARE MADE TO PIPING OR ANY ITEMS OF EQUIPMENT OF

DISSIMILAR METAL, PROVIDE DIELECTRIC FITTINGS.

20. PROVIDE AND INSTALL VALVE TAGS AND PIPE LABELS. SUBMIT PROPOSED VALVE TAG AND LABELING NOMENCLATURE FOR REVIEW. PROVIDE OWNER WITH VALVE SCHEDULE IN FORMAT DETERMINED BY

OWNER.

21. COORDINATE ALL ROOFING WORK AND ROOF PENETRATIONS WITH CERTIFIED ROOFING CONTRACTOR APPROVED BY OWNER. SEAL & PATCH ROOF WATERTIGHT TO MATCH EXISTING CONSTRUCTION. REFER TO

ARCHITECTURAL DRAWINGS FOR ADDITIONAL INFORMATION.

22. ALL PIPING PENETRATIONS THROUGH WALLS SHALL BE CORED AND SLEEVED TO ALLOW INSULATION TO

CONTINUE THROUGH WALL.

FURNISH & INSTALL FAN POWERED BOX AND CONNECT TO EXISTING SUPPLY AIR DUCTWORK FEEDING NEW DIFFUSERS. PROVIDE WITH TRANSITION. ALL EXISTING DUCTWORK SHALL BE THOROUGHLY CLEANED PRIOR TO CONNECTING TO FPB. REINSULATE ANY PART OF EXISTING DUCTWORK MISSING INSULATION. VERIFY EXACT FAN POWERED BOX LOCATION IN FIELD. SUPPORT BOX FROM TOP CHORD OF STRUCTURE WITH ISOLATED HANGERS. BOX SHALL HAVE SOUND ATTENUATOR ON R.A. OPENING. RUN NEW 3/4" HWS & HWR BRANCH PIPING TO CONNECT TO EACH FPB. SEE VALVES & DUCTWORK DETAILS IN

EFO-M4.0 AND M4.1. CORE WALLS FOR NEW PENETRATIONS.

REPLACE EXISTING SUPPLY DIFFUSERS AND RETURN AIR REGISTERS WITH NEW. BALANCE AIR

FLOW AT EACH SUPPLY AIR DIFFUSER & RETURN REGISTER TO AIR VOLUMES INDICATED. PROVIDE

BALANCING DAMPERS AT EACH DUCT TAKE-OFF. PROVIDE WITH NEW DUCT CONNECTION TO NEW

DIFFUSERS AND NEW RETURN/RELIEF AIR DUCT PER DETAIL ON EFO-M4.0.

FURNISH & INSTALL NEW WIRELESS SPACE THERMOSTAT, FPB CONTROLLER AND INCORPORATE INTO

EXISTING BMS SYSTEM. PROVIDE ALL REQUIRED INFRASTRUCTURE FOR SYSTEM INTEGRATION.

T-STAT TO BE INSTALLED AT LOCATION WHERE EXISTING WAS REMOVED. SAW-CUT WALL. PATCH &

PAINT TO MATCH ADJACENT SURFACES.

SAW-CUT EXISTING WALL/CHASE AND CORE FLOOR TO ACCOMMODATE NEW DUCTWORK. REBUILD

WALL & FLOOR. SEE EFO-M0.0 FOR NOTES. PROVIDE WITH FIRE DAMPER AT WALL AND FLOOR

PENETRATIONS .

FURNISH & INSTALL NEW MAIN DUCTWORK ABOVE CORRIDOR CEILING AS SHOWN. VERIFY EXACT DUCTWORK ROUTING IN FIELD. REROUTE & MODIFY EXISTING SUPPLY AIR DUCTWORK SUPPLYING

SPACE/ROOM DIFFUSERS.

NEW RETURN AIR DUCT DOWN INTO BUILDING FROM RT-3 TO RUN ABOVE CEILING OUT INTO OFFICE.

TERMINATE OPENING WITH WIREMESH. PROVIDE WITH FIRE DAMPER AT WALL PENETRATIONS. SAW-CUT

WALL/CHASE. PATCH & PAINT WALLS TO MATCH ADJACENT SURFACES.PROVIDE WITH LINTELS.

SUPPLY AIR AND RETURN AIR DUCT UP TO CONNECT TO ROOF TOP UNIT OPENINGS. CONFIRM SIZES WITH RTU MANUFACTURER. SAW-CUT ROOF. VERIFY EXACT LOCATION IN FIELD. SEAL & PATCH ROOF WEATHER TIGHT TO MATCH EXISTING CONSTRUCTION. PROVIDE WITH 4'-0" LONG SOUND ATTENUATOR ON SUPPLY & RETURN AIR DUCTWORK HORIZONTAL RUN. UNIT WITH RETURN AIR PLENUM SHALL COVER RETURN AIR

DUCT OPENING WITH WIREMESH.

FURNISH & INSTALL NEW HWS & HWR PIPING ABOVE CEILING TO FEED NEW FPBs. CONNECT TO EXISTING HWS & HWR MAINS. VERIFY EXACT CONNECTION INFIELD. PIPE INSULATION PER SPECIFICATION ON ALL NEW AND EXISTING PIPING. CORE WALLS AND FLOOR FOR NEW PENETRATIONS. VERIFY ALL ROUTING & PENETRATIONS IN FIELD. SEAL & PATCH WALLS AND PAINT TO MATCH EXISTING CONSTRUCTION AND

ADJACENT SURFACE.

FURNISH & INSTALL NEW CABINET HEATER & T-STAT AT LOCATIONS WHERE EXISTING WERE REMOVED.

SAW-CUT WALL AND MODIFY OPENING FOR NEW CABINET HEATER & CONNECTIONS TO EXISTING HWS & HWR PIPING. FURNISH & INSTALL NEW BALL VALVE & BALANCING VALVE ABOVE CEILING. SEAL, PATCH

& PAINT WALLS TO MATCH EXISTING CONSTRUCTION AND ADJACENT SURFACE.

EXISTING HWS & HWR PIPING TO REMAIN FOR EXTENSION & RECONNECTION. ALL PIPING SHALL BE INSULATED FOLLOWING COMPLETION OF WORK. ANY DAMAGED INSULATION SHALL BE REPLACED WITH

NEW.

EXISTING TRANSFER AIR OPENING TO REMAIN. VERIFY & CONFIRM SIZE IN FIELD. MODIFY OPENING TO ACCOMMODATE NEW DUCTWORK FROM FAN POWERED BOXES AND/OR NEW CONNECTION TO NEW RETURN

AIR REGISTER. NEW FIRE DAMPER SHALL BE INSTALLED AT ALL OPENINGS.

NEW 36" X 8" TRANSFER AIR OPENING ABOVE CEILING WITH WIREMESH AT BOTH OPENING ENDS.

PROVIDE WITH FIRE DAMPER AND LINTEL. SAW-CUT WALL. VERIFY EXACT LOCATION IN FIELD.

NEW 16" X 8" TRANSFER AIR OPENING ABOVE CEILING WITH WIREMESH AT BOTH OPENING ENDS.

PROVIDE WITH FIRE DAMPER AND LINTEL. SAW-CUT WALL. VERIFY EXACT LOCATION IN FIELD.

FURNISH & INSTALL NEW WALL MOUNTED AC UNIT. RUN REFRIGERANT PIPING FROM CU-1 ON ROOF

DOWN THRU FLOOR TO UNIT. RUN 1" CONDENSATE PIPING ABOVE CEILING TO SLOPE DOWN TO

JANITOR CLOSET & TERMINATE 6" ABOVE MOP SINK. VERIFY ALL PIPING ROUTING IN FIELD. CORE

WALLS & FLOOR. SEAL, PATCH & PAINT WALLS TO MATCH ADJACENT SURFACES.

DUE TO THE NATURE OF THIS PROJECT AND THE LONG LEAD TIMES FOR SPECIFIC

EQUIPMENT, THE OWNER HAS DECIDED TO CREATE A PRE-PURCHASE PACKAGE FOR THE NEW

ROOF TOP UNITS, CURBS AND VISION SCREENS. ALL ROOF TOP UNITS, CURBS AND VISION

SCREENS WILL BE DELIVERED TO THE CONSTRUCTION SITE UNDER THE PRE-PURCHASE

AGREEMENT. THE MECHANICAL CONTRACTOR IS RESPONSIBLE FOR RECEIVING, UNLOADING,

INSPECTING FOR DAMAGE, CRANED INTO PLACE AND INSTALLING EQUIPMENT, MAKING

MODIFICATIONS FOR THE INSTALLATION AND MAKING ALL FINAL CONNECTIONS INTO THE

REQUIRED SYSTEMS PER THESE SPECIFICATIONS. ALL EQUIPMENT RELATED WARRANTIES ARE

INCLUDED IN THE PRE-PURCHASE AGREEMENT; HOWEVER, THE MECHANICAL CONTRACTOR

SHALL CARRY ALL INSTALLATION RELATED WARRANTIES AS SPECIFIED. THE MECHANICAL

CONTRACTOR WILL BE RESPONSIBLE FOR COORDINATING ALL START UP AND TESTING OF

THE EQUIPMENT WITH THE APPROPRIATE PARTIES, PROVIDE INSTALLATION SHOP

DRAWINGS, ALL REQUIRED CLOSE OUT DOCUMENTS/AS-BUILT DRAWINGS, AND TRAINING

ON EQUIPMENT INSTALLED PER THESE SPECIFICATIONS.

· COVER AND PROTECT ALL OWNER FURNITURE AND ELECTRONICS FROM

DEBRIS DURING CONSTRUCTION PROJECT. PROTECT AND COVER ALL

FLOORING AS REQUIRED TO AVOID DAMAGE DUE TO USE OF LADDERS, LIFTS,

ETC. PROVIDE MASONITE TO COVER FLOORING IN ALL AREAS INCLUDING

GYMNASIUMS, MULTI-PURPOSE ROOMS, CAFETERIAS, ETC., TO PREVENT

DAMAGE/SCRATCHES TO SPECIAL SURFACES. THOROUGHLY CLEAN AND

VACUUM ALL AREAS THAT WORK HAS BEEN COMPLETED IN.

· PROTECT THE MATERIALS AND WORK OF OTHER TRADES FROM DAMAGE

DURING INSTALLATION OF THE WORK PROVIDED UNDER DIVISIONS 26, 27

AND 28.

· PAY PARTICULAR ATTENTION TO THE LIMITED SPACE AVAILABLE IN CERTAIN

LOCATIONS OF THE PROJECT SO THAT EQUIPMENT MAY BE INSTALLED

WITHOUT ANY INTERFERENCE.

· CONTRACTOR SHALL CLEANUP SITE ON A DAILY BASIS. REMOVE ALL

RUBBISH, DEBRIS, ETC. ACCUMULATED FROM THIS OPERATION DURING THE

COURSE OF THE WORK. LEGALLY DISPOSE OF SAME OFF-THE-SITE.

· CONTRACTOR RESPONSIBLE FOR MOVING OWNER'S FURNITURE AS NEEDED

TO ACCOMPLISH WORK.

· WHEN WORKING AFTER-SCHOOL HOURS, CONTRACTOR SHALL PROTECT ALL

OWNER'S FURNITURE, ELECTRONICS, ETC., IN CLASSROOMS AND OFFICES,

AND RETURN THESE LOCATIONS TO THE SAME CONDITION AS ORIGINALLY

FOUND SO AS TO PREPARE BUILDING FOR THE FOLLOWING SCHOOL DAY.

· AFTER THE COMPLETION OF INSTALLATION, ALL SYSTEMS SHALL BE

THOROUGHLY CLEANED. CLEAN ALL FOREIGN MATTER FROM ALL FIXTURES,

EQUIPMENT, AND EXTERIOR OF CONDUITS.

AutoCAD SHX Text

EFO- M0.0

AutoCAD SHX Text

HEAT PUMP REPLACEMENT AT:

AutoCAD SHX Text

FOX MEADOW ELEM. SCHOOL 1275 JENNA DR., SOUTH ELGIN, IL. 60177

AutoCAD SHX Text

ELGIN, ILLINOIS 60120

AutoCAD SHX Text

SCHOOL DISTRICT U-46

AutoCAD SHX Text

355 EAST CHICAGO STREET

AutoCAD SHX Text U-46 P.N. 728-26

AutoCAD SHX Text Revisions:

AutoCAD SHX Text

%%UGENERAL MECHANICAL NOTES:

AutoCAD SHX Text

(SEE BOOK SPECIFICATION FOR ADDITIONAL INFORMATION)

AutoCAD SHX Text

%%UMECHANICAL NEW WORK PLAN NOTES:

AutoCAD SHX Text

%%UDAILY CLEANING OF JOB SITE:

PROTECTION AND

VENTILATION NEW

WORK

Sheet No.:

U46 Project No.:

728-26

Date:

February 2, 2026

Sheet Title:

P ro j.

N o.

V irg in ia S tre et

C ry st al L ak e, Il lin oi s

O ffi ce

-7

-8

Fa x

8-w w w

.m sa

-c e.

co m

SEE ENLARGED BOILER

ROOM PLAN EFO-M1.3

150-S

8"Ø NK.

CFM

200-S EA

8"Ø NK.

(TYP. OF 2)

340-S EA

10"Ø NK.

(TYP. OF 5)

CFM

340-S EA

10"Ø NK.

(TYP. OF 5)

150-S

8"Ø NK.

CFM

150-S

8"Ø NK.

150-S

8"Ø NK.

CFM

14/

CFM

14/

CFM

14/14

150-S

8"Ø NK.

CFM

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

CFM 1250

CFM

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

CFM

CFM600

CFM

10"Ø

6"Ø

10/8

8"Ø

20/12

20/1216/12

10/12

8/10

6/10

12/10

12/10 8/108/10

200-S EA

10"Ø NK, 2-SLOTS

1" WIDE, 2' LONG

(TYP. OF 2)

180-S EA

8"Ø NK, 2-SLOTS

1-1/2" WIDE, 2' LONG

(TYP. OF 7)

10"Ø

180-S EA

8"Ø NK, 2-SLOTS

1-1/2" WIDE, 2' LONG

(TYP. OF 6)

180-S EA

8"Ø NK, 2-SLOTS

1-1/2" WIDE, 2' LONG

(TYP. OF 6)

150-S EA

8"Ø NK, 2-SLOTS

1-1/2" WIDE, 2' LONG

(TYP. OF 4)

300-S

10"Ø NK.

300-S

10"Ø NK.

CFM

CFM8/10

150-S

8"Ø NK.

200-S EA

8"Ø NK.

(TYP. OF 12) 300

CFM

300-S

10"Ø NK.

310-S EA

10"Ø NK.

(TYP. OF 2)250-S EA

10"Ø NK.

(TYP. OF 2)

260-S

10"Ø NK.

CFM

CFM8/10

CFM

150-S

8"Ø NK.

150-S

8"Ø NK.

150-S

8"Ø NK.

150-S

8"Ø NK.

CFM

8/10

14/14 14/14

CFM

300-S

10"Ø NK.

300-S

10"Ø NK.

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

150-S

8"Ø NK.

150-S

8"Ø NK.

300-S EA

10"Ø NK.

(TYP. OF 2)

8"Ø

10"Ø 30/12

20/12

16/12

20/12

14/12

CFM

16/10

12/8

12/6

200-S EA

8"Ø NK.

(TYP. OF 4)

10"Ø

8"Ø 14"Ø

56/14

36/18 RA UP.

24/20

12"Ø

8"Ø

12"Ø

8"Ø

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

24/20

12"Ø

8"Ø

14"Ø

36/24 RA UP.

24/20 SA UP.

24/20 RA UP.

24/20 SA UP.

24/20 RA UP.

24/20

200-S

8"Ø NK.

200-S

8"Ø NK.

8"Ø

8/10

J.C.

CLASSROOM

BOY'S

GIRL'S

133B

CONFERENCE

KITCHEN

OFFICE

133A

PRINCIPAL

KINDERGARTEN

OUTDOOR

STORAGE

GYMNASIUM

OFFICE

STORAGE STORAGE

CLASSROOM

WOMEN'S

MEN'S

102A

TOILET

103A

TOILET

133E

TOILET

BOY'S

GIRL'S

BOY'S

GIRL'S

STAIR

BOILER

ELEC.

PLANNING AREA

115B

STORAGE B

STORAGE

CORRIDOR

VESTIBULE

STORAGE

102B

STORAGE

103B

STORAGE

115A

STORAGE

LOBBY

133C

ASSISTANT

PRINCIPAL

133D

ASSISTANT

PRINCIPAL

120C

GYM

STORAGE

120B

GYM

OFFICE

120A

REC.

OFFICE

120D

SPRINKLER

115D

ELEV.

EQUIP.

MAIL/CLERICAL

GENERAL

STORAGE

COMMONS

DATA/

STORAGE

OFFICE

SPEECH

THERAPY

103C

PLANNING AREA

REFER TO EFO-M0.0

FOR NOTES

AutoCAD SHX Text

%%UFIRST FLOOR PLAN - AREA A - MECHANICAL VENTILATION NEW WORK

AutoCAD SHX Text

SCALE: 1/8"=1'-0"

AutoCAD SHX Text

EFO- MV1.1

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

HEAT PUMP REPLACEMENT AT:

AutoCAD SHX Text

FOX MEADOW ELEM. SCHOOL 1275 JENNA DR., SOUTH ELGIN, IL. 60177

AutoCAD SHX Text

ELGIN, ILLINOIS 60120

AutoCAD SHX Text

SCHOOL DISTRICT U-46

AutoCAD SHX Text

355 EAST CHICAGO STREET

AutoCAD SHX Text U-46 P.N. 728-26

AutoCAD SHX Text Revisions:

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text

FPB

AutoCAD SHX Text A10

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text A58

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text A9

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text A8

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

FPB

AutoCAD SHX Text B1

AutoCAD SHX Text B2

AutoCAD SHX Text

FPB

AutoCAD SHX Text B4

AutoCAD SHX Text

FPB

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

FPB

AutoCAD SHX Text A22

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text A23

AutoCAD SHX Text

FPB

AutoCAD SHX Text A25

AutoCAD SHX Text

FPB

AutoCAD SHX Text A27

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text A3

AutoCAD SHX Text

FPB

AutoCAD SHX Text A7

AutoCAD SHX Text

FPB

AutoCAD SHX Text A6

AutoCAD SHX Text

FPB

AutoCAD SHX Text A4

AutoCAD SHX Text

FPB

AutoCAD SHX Text A5

AutoCAD SHX Text

FPB

AutoCAD SHX Text A2

AutoCAD SHX Text

FPB

AutoCAD SHX Text A1

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

FPB

AutoCAD SHX Text A11

AutoCAD SHX Text

FPB

AutoCAD SHX Text A12

AutoCAD SHX Text B

AutoCAD SHX Text

FPB

AutoCAD SHX Text A15

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text B3

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text A14

AutoCAD SHX Text

FPB

AutoCAD SHX Text A16

AutoCAD SHX Text

FPB

AutoCAD SHX Text A13

AutoCAD SHX Text

FPB

AutoCAD SHX Text A17

AutoCAD SHX Text

FPB

AutoCAD SHX Text A19

AutoCAD SHX Text

FPB

AutoCAD SHX Text A21

AutoCAD SHX Text

FPB

AutoCAD SHX Text A26

AutoCAD SHX Text

FPB

AutoCAD SHX Text A18

AutoCAD SHX Text

FPB

AutoCAD SHX Text A28

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

FPB

AutoCAD SHX Text A20

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text A24

AutoCAD SHX Text A

AutoCAD SHX Text

FPB

AutoCAD SHX Text A57

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text T

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

VENTILATION NEW

WORK

Sheet No.:

U46 Project No.:

728-26

Date:

February 2, 2026

Sheet Title:

P ro j.

N o.

V irg in ia S tre et

C ry st al L ak e, Il lin oi s

O ffi ce

-7

-8

Fa x

8-w w w

.m sa

-c e.

co m

40-S EA

0"Ø NK.

TYP. OF 5)

425-S EA

12"Ø NK.

(TYP. OF 2)

400-S EA

12"Ø NK.

(TYP. OF 2)

CFM

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

CFM

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

CFM

16/10

10/10

425-S EA

12"Ø NK.

(TYP. OF 2)

400-S EA

12"Ø NK.

(TYP. OF 2)

CFM

200-S

8"Ø NK.

150-S

8"Ø NK.

CFM

200-S

8"Ø NK.

300-S EA

10"Ø NK.

(TYP. OF 2)

325-S EA

10"Ø NK.

(TYP. OF 2)

CFM

14/14

C…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Feb 3, 2026.