1. Statement of Work.pdf
PDF 103 KB Posted
- Attached to
- Bore Sight Repair and Calibration Service
- Solicitation number
- W911KF-24-Q-0018
About this file
This document is a Statement of Work for the repair and calibration of three bore sight telescopes used in the bore sight alignment process for various weapon systems. The vendor must repair the telescopes to "like-new" condition, using only new OEM parts or certified replacements. The telescopes must be capable of accurately performing the bore sight alignment procedure per the OEM specifications and carry a one-year warranty. The scope is limited to three telescopes, with a delivery time not to exceed four weeks. The telescopes must be calibrated annually, with Telescope #2 calibrated first, followed by Telescope #1 six months later. The contractor is responsible for return shipment of the telescopes to the Anniston Army Depot. This is a sole source procurement to Warren-Knight Instrument Co. for the repair and calibration service.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 4. Wage Determination.pdf | ||
| 3. CDRL A001 - Property Management System Procedures.pdf | ||
| 5. Evidence of Authority.pdf | ||
| W911KF-24-Q-0018 Released.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work for Bore Sight Telescope Repairs
I. This specification establishes a requirement for a base year plus four option years of the calibration and repair of THREE each bore sight telescopes.
1. These bore sight telescopes were manufactured by Warren-Knight Instrument Company (OEM) and used in the bore sight alignment process in Bldg. 501 for the M109 Paladin, M1 Abrams and M198 weapon systems.
2. The vendor shall repair the telescopes to “like-new” condition (or better) when bore sights are used within normal duty/life cycles (i.e. no catastrophic failures or incidents).
3. Only new OEM repair parts or components, or certified replacements of equal quality, shall be used to repair the equipment. If repair parts are not available on-site, contractor shall provide all repair parts and maintenance supplies and invoice separately to the Government.
4. The telescope shall be capable of correctly and accurately performing the boresight alignment procedure according to the OEM specifications.
5. The telescopes shall carry a one (1) year warranty on parts and labor covered by the vendor beginning after delivery to Anniston Army Depot.
6. This scope of work shall be limited to three count telescopes (see information below) and not to exceed a delivery time of four (4) weeks.
Telescope #1 Serial Number: 127752 Part Number: 8015873
Telescope #2 Serial Number: 8083 Part Number: 8015873
Telescope #3 Serial Number: 28321 Model Number: 29-8120
7. All telescopes shall be calibrated once annually and repaired as needed. Telescope #2 bore sight telescope shall be calibrated first followed by Telescope #1 six months as to not overlap in calibration to maintain mission and audit readiness.
8. Contractor shall be responsible for return shipment of Bore Sight Telescopes to Anniston Army Depot as follows:
Anniston Army Depot 7 Frankford Avenue Anniston, AL 36201 Building 232
II. Scope Changes.
The Contractor shall not proceed with any verbal or written change(s) to the scope of work from sources other than the Contracting Officer, who will provide changes in writing.
File details come from the government source that posted it. Updated .