1.SOW Continuous Friction Measuring Equipment _3 Sep 2025.pdf

Statement of Work (SOW) For

Continuous Friction Measuring Equipment (CFME) At

Joint Base McGuire-Dix-Lakehurst 3 September 2025

1.0. PURPOSE.

1.1 Purchase the Continuous Friction Measuring equipment (CFME) RT3 Flight model or equal, installation of CFME at Building 1758. As part of the contract, the contractor will send a technician to Joint Base McGuire-Dix-Lakehurst to complete the installation.

2.0. SALIENT CHARACTERISTICS.

2.1. The CFME must be integrated into the framework of the vehicle, i.e. self-contained but easily accessible for maintenance, repair and cleaning. It must also have a bumper to protect the CFME from damage.

2.2. Any modifications required to the vehicle must be approved for GSA vehicles at other USAF locations.

2.3. No permanent modifications to the vehicle. No holes in the bed of the vehicle.

No decrease in the truck bed area.

2.4. The installation of the friction tester must not impact the warranty of the vehicle.

2.5. Must be able to integrate into any 1/2 ton or larger pick-up truck or any large

SUV.

2.6. Provide fast, continuous, accurate, and reliable friction measurements (RCR Values) for the entire length of the runway or testing surface, less the differences required for accelerating and decelerating the vehicle at the runway ends.

2.7. Must be approved by the FAA.

2.8. Be used in extreme winter contaminant conditions for snow and ice removal testing.

2.9. Complete 12K tests in a season without replacing the measurement tire.

2.10. CFME design allows the unit to be transported across heavily contaminated surfaces with snow and ice onto the measurement surface.

2.11. It is ready to be used as soon as the vehicle is started with only friction tire pressure tests and visual inspection.

2.12. Can be readily transferred to a new vehicle when the testing vehicle needs to be upgraded at minimal additional cost

2.13. Be easily removable from the host vehicle at the end of the winter Testing season, if required.

2.14. Generate accurate values on wet pavement, regardless of temperature, without tire degradation.

2.15. Be designed to sustain rough usage and still function properly

2.16. Easy to maintain. The CFME should not require daily calibration. Operations need to be able to access the airfield for testing quickly.

2.17. The CFME design should have no exposed pully's, chains, or springs that can be lost on the airfield.

2.18. CFME tester must-have stainless steel fabrication to reduce maintenance.

2.19. It is designed to be used in winter conditions for snow and ice control friction measurements.

2.20. Use a large radius tire such as an ASTM 501 or ASTM 524.

2.21. The CFME device, part # HTI-A-1203-I-002 or equivalent, must not interfere with the operational duties of the Airport Operations/Maintenance teams conducting the friction studies. It must allow the airport personnel to use the vehicle for other functions than friction testing. Operators should be able to respond quickly to other duties on the airfield, to be able to back-up and to cross of heavily contaminated surfaces if necessary to access the testing surface. It must be rugged in design and proven to be effective in extreme winter condition friction testing.

3.0 SOFTWARE.

3.1. The contractor will provide the customer with a tailored software package for the CFME system based on their airfield requirements. The customer will have a license to that software for the life of the CFME. The tablet software must save the data from the CFME display. The data is sent from the CFME Display through a Bluetooth device, provided by the contractor, that is plugged into the serial port in the back of the display and is connected to the tablet.

4.0. WEBSITE.

4.1. Have a tailored web-based winter condition and RCR (Mu Value) reporting website with user and Administrator views. Data from the CFME should be sent to the website directly. Personnel from the base can log into the website and see RCR values and conditions in real-time as testing is being performed. Airfield Management can determine what information is shared with each user group and how that information is formatted. From this website, they can communicate with Flight Crews, add comments, and indicate which surfaces are open and closed.

5.0 DELIVERY REQUIREMENTS:

5.1. The contractor will arrange for transportation of the CFME from the contractor’s facility to the indicated address at Joint Base McGuire-Dix-Lakehurst.

5.2. It will be shipped in a single wooden crate that can be lifted with a forklift.

5.3. The deliverables will be delivered and installed on the vehicle provided by the customer within 45 days after the contract award.

5.4. The delivery location is 1758 Vandenberg Ave, JBMDL, NJ 08641.

6.0. EQUIPMENT.

6.1. The contractor will provide one Samsung S10 or equivalent tablet with cover and screen protector and one modified tablet stand (for vehicle use) that will hold the table and the Custom Display. The tablets must be compatible with the Bluetooth device and software. The tablet must have cellular service capability, WIFI and Bluetooth compatible.

7.0. INSTALLATION REQUIREMENT.

7.1. The contractor will provide qualified technician(s) for the installation of the CFME. The customer may be asked to aid in the installation. Any requested tools must be provided well in advance and should be standard in any vehicle maintenance and repair operation.

7.2. The contractor shall be responsible for on-site coordination of all staging and deliveries of their product, to include access to and operation of any equipment needed for unloading and movement of materials or product.

7.3. The contractor shall be responsible for following all safety and security guidelines within the area in which work is being performed, to include securing any contractor owned tools or equipment and any on site storage being utilized

7.4. The contractor shall remove and dispose of all items relating to the installation of the CFME, such as (but not limited to) protective shipping containers and boxes.

8.0. WARRANTY.

8.1. The contractor shall provide a one (1) year warranty covering all components and installation of the CFME through normal wear and tear. Damage to the unit through carelessness or neglect will not be covered under warranty.

9.0. CYBERSECURITY.

9.1. All system components installed must be in compliance with DoD, Federal, and

NIST RMF cybersecurity standards. The contractor will assist 87 ABW with achieving an Authority to Operate (ATO).

Note: If there is another DoD entity that has an approved ATO or certification for the same hardware and software, reciprocity can be used to forgo testing. The system shall then be added to the Base System Security Authorization Agreement. All networkable equipment such as network switches, servers, etc. provided in this contract should be compatible to undergo the above-described certifications and accreditations.

9.2. This installation will use only Air Force approved hardware. Installed software shall be approved for use on the AF-GIG and listed on the AF Evaluated Products List. The list or certification can be from another branch or DoD Approved products Listing, if it has certification from another branch Reciprocity can be used. Again, a copy of certification will have to be provided.

9.3.

Software:https://cs2.eis.af.mil/sites/13954/Lists/COTSGOTS%20Software/EPL.aspx

9.4. Hardware: https://aplits.disa.mil/aplhttps://aplits.disa.mil/apl

10.0. GENERAL INFORMATION.

10.1. Items must be brand new. Refurbished items are not authorized.

10.2. Hours of Operation: Services will be performed Monday through Friday from 0730 to 1630. The contractor is not required to provide services on Federal Holidays or base down days (e.g. AMC Pass Days). The contractor shall not be required to perform services when the base is delayed or closed due to inclement weather.

11.0. SECURITY REQUIREMENTS.

11.1. For either the site visit or submission of proposals all personnel requesting access to McGuire Air Force Base must possess a valid State or Government picture identification card. Furthermore, individuals presenting identification cards from a state that is non-compliant with the REAL ID Act will require additional documentation to gain unescorted base access. Additional documentation includes a valid U.S. or foreign government issued passport, an employment authorization document that contains a photograph, or identification cards issued by federal state or local government agencies that include a photo and biographic information. A full list of REAL ID Act compliant and non-complaint states can be found at https://www.dhs.gov/current-status-states-territories. Personnel requesting vehicle access to McGuire Air Force Base must provide a valid driver's license, current vehicle registration, and valid vehicle insurance.

11.2. Physical Security: The contractor shall be responsible for safeguarding all government property provided for use. At the end of each workday, the contractor will ensure the equipment and materials are secure.

11.3. Pass and Identification Items: The contractor shall ensure that pass and identification items required for contract performance are obtained for contractor employees and non-Government owned vehicles (as applicable.)

11.4. Traffic Regulations: Contractor employees shall comply with all base traffic regulations and are subject to random vehicle speed control checks. Contractor personnel cited for traffic violations on the installation may suffer loss of base driving privileges, debarment from the base, or other administrative action. The use of cell phones, except hands-free phones, is prohibited while driving on military bases.

11.5. Random Personnel and Vehicle Searches: Contractor personnel are subject to random personnel and vehicle searches. If contractor personnel refuse to be searched, they will be denied entry to the base, and may result in loss of base driving privileges, debarment from the base, or other administrative action.

11.6. Weapons, Firearms, And Ammunition: Contractor employees are prohibited from possessing weapons, firearms, or ammunition, on themselves or within contractor-owned vehicles or privately owned vehicles while on military bases.

11.7. Reporting Requirements: Contractor personnel shall immediately report any information or circumstances of which they are aware may pose a threat to the security of Department of Defense personnel, contractor personnel, resources, and classified or unclassified defense information to an appropriate Government authority.

11.8. Cell Phone Usage: The use of cell phones will be in accordance with posted directives on the government installation.