1.05 PWS.pdf

Performance Work Statement

40 Cubic Yard Roll Off Container Rental Service for building 3776 for

Center for Information Warfare Training (CIWT) Corry Station

PART 1

GENERAL INFORMATION

1. General. This is a contract to provide 40 Cubic Yard Roll Off Container haul and dump rental service for the

Center for Information Warfare Training (CIWT) buildings and spaces aboard Corry Station, Pensacola Florida.

1.1 Description of Requirement/Introduction. The Contractor will provide all personnel, equipment, tools, and other items for the rental of a 40 Cubic Yard Roll-Off Container at Building 3776 and up to an additional twelve (12) 40-

Cubic Yard Container drop-offs and dumps per year at various locations onboard Corry Station on an as needed basis.

1.1.1. The Contractor will perform the following task assignments within the parameters of the specific requirements outlined in this section for the haul and dump rental service of the 40 Cubic Yard Roll - Off Containers.

1.1.2. Provide a 40 Cubic Yard Roll-Off Container placement on the south side of building 3776 located on Corry

Station, Pensacola, FL 32511.

1.1.3. Provide for a maximum of fifteen (15) dumps/haul offs of the 40 Cubic Yard Roll-Off Container for building

3776 located on Corry Station, Pensacola, FL 32511.

1.1.4. Provide up to an additional 12 hauls / dumps of 40 Cubic Yard Roll-Off Containers as needed, at various

Buildings on Corry Station, Pensacola, FL 32511.

1.1.5. The Contractor’s response time for 40 Cubic Yard Roll-Off Containers will be within two business days from the time the Government contacts the Contractor.

1.2. Background. CIWT Corry Station, Pensacola, FL has warehouse operations and various projects throughout the base that have a need to properly dispose of refuge and debris.

1.3. Objectives. The objective of this contract is to provide a twelve (12) month rental service of up to fifteen (15) maximum haul and dumps of the stationary 40 Cubic Yard Roll – Off Containers for building 3776 plus up to an additional (12) 40-Cubic Yard Roll-Off Container haul and dumps at other Corry training buildings.

1.4. Scope. This contract includes all functions, tasks and responsibilities normally provided by the 40 Cubic Yard

Roll – Off Containers haul and dump rental service provider.

1.5. PERFORMANCE PERIOD

See Schedule

Period of Performance: See Schedule.

1.6. Hours of Operation.

1.6.1. Normal Duty Hours. The Contractor is responsible for providing items and performance between the hours of

0700 to 1600 CDT, Monday through Friday, except on Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The

Contractor will maintain an adequate workforce for the uninterrupted performance of all tasks defined within this

Performance Work Statement.

1.6.2. Federal Government Holidays.

a. New Year’s Day 1st day of January

Martin Luther King Jr.'s Birthday 3rd Monday of January

Presidents Day 3rd Monday of February

Memorial Day Last Monday of May

Juneteenth Day 3rd Monday of June

Independence Day 4th day of July

Labor Day 1st Monday of September

Columbus Day 2nd Monday of October

Veterans Day 11th day of November

Thanksgiving Day 4th Thursday of November

Christmas Day 25th day of December

b. When one of the above designated legal holidays falls on a Sunday, the following Monday will be observed as a legal holiday. When a legal holiday falls on a Saturday, the proceeding Friday is observed as a legal holiday. This list of holidays relates to Government duty days and is not intended to supplement or otherwise alter the provisions of any Wage Determination regarding applicable paid holidays.

1.6.3. Inclement Weather Operations. In cases of severe weather, the Contracting Officer (KO) may authorize exceptions. When exceptions are granted, the Contractor will make up all missed requirements within 24 hours after the severe weather has terminated, unless the KO authorizes additional time. Rescheduling to provide make-up requirements will not be a basis for a claim by the Contractor for additional compensation. The Contractor may be required to retrieve, store, and replace containers at no additional cost to the government in the case of extreme weather where the containers may become hazards to the command, (ie. Hurricanes).

1.7. Place of Performance. All 40-Cubic Yard Roll Off Container service to be provided under this contract will be located onboard the Center for Information Warfare Training (CIWT) located on Corry Station, 640 Roberts

Avenue, Pensacola, FL 32511.

1.8. Type of Contract. The Government will award a Firm Fixed Price (FFP) Contract.

1.9. Quality Control. Quality Control is the responsibility of the Contractor. The Contractor is responsible for the delivery of quality items and services to the Government in accordance with (IAW) the terms and conditions contained in Federal Acquisition Regulation (FAR) Subpart 52.212-4 entitled, “Contract Terms and Conditions -

Commercial Items” and applicable sub- clauses pertaining to quality control.

1.9.1. Designated Government Representative (DGR). The DGR monitors all technical aspects of the contract and assists in contract administration. The DGR is authorized to perform the following functions: Assure that the

Contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the Contractor concerning technical aspects of the contract; including Government drawings, designs, and specifications; monitor Contractor's performance and notify both the KO and Contractor of any deficiencies; coordinate availability of Government furnished property;

and provide site entry of Contractor personnel. The DGR is not authorized to change any of the terms and conditions of the resulting contract. The Contractor will coordinate and obtain prior approval from the DGR for all pick-up and delivery of units. The DGR will be either the customers technical and financial point of contacts.

Technical Point of Contact: To be provided at award.

Alternate Point of Contact: To be provided at award.

1.9.2. Corrective Actions. At any time, it is determined by the KO that the quality control system, personnel, instructions, controls, tests, or records are not providing results, which conform to contract requirements, action will be taken by the Contractor to correct the deficiency. If a Contract Discrepancy Report (CDR) is issued the

Contractor will develop a Corrective Action Plan (CAP), which identifies the root cause, Corrective Action (CA) for the root cause, CA for the specific non-conformance and CA to the root cause to prevent recurrence and a corrective action including the timeline for completion.

1.10. Operations Security (OPSEC).

Access and General Protection/Security: Policy and Procedures. Contractors and all associated subcontractors will comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by Government Representative). The Contractor will also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost

Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DoD, Department of the Navy (DoN) and/or local policy.

In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection

Condition (FPCON) at any individual facility or installation change, the Government may require changes in

Contractor security matters or processes.

1.10.1. Defense Biometric Identification System (DBIDS). The Center for Information Warfare Training (CIWT)

Corry Station, Pensacola, Florida has transitioned to the DBIDS. DBIDS increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions. The system provides a continuous vetting anytime the

DBIDS card is scanned at an installation entry point.

If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a

DBIDS credential:

• Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor

Control Center (VCC) representative.

• The VCC will pull up your information in the computer, ensuring all information is current and correct.

• Once your information is validated, a temporary DBIDS credential is provided.

• Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (For 0-179 days will be issued a paper pass in no more than 30 day increments. Over 179 days, you will be issued a DBIDS card).

• For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor

Control Center.

• The representative will enter base access authorization and then you may proceed to work.

• If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

• Present a letter or official document from my government sponsoring organization that provides the purpose for your access.

• Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

• Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

• Upon completion of the background check, the Visitor Control Center representative will complete the

DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

• You may now proceed to work.

For additional questions about obtaining a DBIDS card, contact your local base visitor control center.

Additional information is available at https://www.cnic.navy.mil/om/dbids.html.

1.11. Security.

1.11.1. Security Requirements. No employee or representative of the Contractor will be admitted to the site of the work unless furnishes satisfactory proof that of U.S. a citizenship or if an alien, residence within the United States is http://www.cnic.navy.mil/om/dbids.html legal. Employers are required to maintain completed Department of Homeland Security (DHS) Form 1-9 for each employee on site at all times.

1.11.2. Physical Security. The Contractor will be responsible for safeguarding all Government equipment, information and property provided for Contractor use IAW OPNAVINST 5530.14E CH-2, Navy

Physical Security and Law Enforcement Program. Contractor will maintain a physical security checklist/log which will be forwarded to the Government Representative on a weekly basis. At the close of each work period, Government facilities, equipment and materials will be secured.

1.11.3. Security of Classified Items, Systems and Information. The Contractor will not access, view, possess, or use classified information under this contract. The Contractor will immediately contact the Government Representative for instructions if access to classified information becomes necessary or if the Contractor falls into the possession of classified information while performing services under this contract.

1.12. Safety. The Contractor will establish and maintain a safety plan.

1.12.1. In order to provide safety control for protection to the life and health of employees and other persons; for prevention of damage to property, materials, supplies, and equipment; and for avoidance of work interruptions in the performance of this contract, the Contractor will comply with 29 CFR 1910, Occupational Safety and Health

Standards hereby incorporated by reference. The Contractor will comply with the above and all other applicable

DoD, Navy, Federal, State and Local safety and health requirements.

1.12.2. Environment and OSHA. The Contractor will comply with OSH Act of 1970 hereby incorporated by reference. Any apparent conflict between compliance with such local, State, and Federal environmental and occupational safety laws, rules, regulations, and compliance with the requirements of the contract will be immediately brought to the attention of the KO for final resolution. The Contractor will notify the KO in writing in addition to any verbal notification of such conflict. The Contractor will be liable for all fines, penalties, and costs which result from violations of, or failure to comply with, all such local State, or Federal laws, rules, and regulations. All unsafe acts or conditions fostered by the Contractor or Contractor personnel may be grounds for the

KO to halt any and all Contractor performance with a commensurate deduction of monies due to the Contractor until such unsafe conditions are corrected. The Contractor will take due caution not to endanger personnel during performance of this contract. Upon discovery of a serious hazard such as, but not limited to, fire, or large fuel spill, the Contractor will notify the KO or designated representative.

1.12.3. Reporting Mishaps. The Contractor will train personnel to recognize fire and safety hazards and encourage personnel in the performance of their duties to report fire and safety hazards and unsafe conditions to their supervisor. The Contactor will take corrective action to remedy reported deficiencies IAW the terms of this contract.

The Government Representative will be notified of deficiencies beyond the terms of this contract. The Contractor will adhere to reporting of mishaps IAW OPNAVINST 5102.1D MCO P5102.1B, Navy & Marine Corps Mishap and Safety Investigation, Reporting, And Record Keeping Manual hereby incorporated by reference. In addition, the

Contractor will report injury or occupational illness to on-duty Contractors and Contractor accidents involving Navy property and personnel.

1.12.4. Emergency Services.

a. The Contractor will have competent personnel trained and capable of dealing with minor personnel injuries. The

Contractor or their personnel will immediately notify their supervisor of any accident requiring emergency medical treatment. The Contractor will, in turn, notify the KO or DGR within 30 minutes of the incident.

b. Emergency medical treatment and services for Contractor personnel is the responsibility of the Contractor.

1.12.5. Personnel Safety. The Contractor will immediately correct all safety deficiencies upon notification of the deficiencies by the KO or designated government representative and will notify the KO or DGR of the corrective action to be taken.

1.13. Personnel. For purposes of this paragraph, the term “personnel” refers to any person performing work related to this contract, including but not limited to, the Contractor’s employees, agents, representatives, or subcontractor.

The Contractor will staff this effort with trained, competent and capable personnel for the discipline they are assigned. Contractor personnel will present a clean, neat and professional appearance. The Contractor will ensure that personnel meet all applicable federal, state, local, and installation certification, licensing, medical requirements, and qualifications to perform all assigned tasks and functions as defined in this contract prior to commencement of work. The Contractor will not permit any personnel to work under this contract if such person is identified by a

Government authorized representative to the Contractor as a potential threat to the health, safety, security, general well-being, or operational mission of the Navy and Corry station Pensacola, FL. All Contractor personnel will comply with installation security and access procedures and the Contractor’s final Safety Plan.

1.13.1. Motor Vehicle Operators. Contractor’s personnel, whose tasks involve operation of any vehicles, will possess a valid U.S. state driver’s license, certificates and permits, applicable for the type and class of vehicle being operated.

1.13.2. Authorization to Work. Contractor's personnel will either be a United States Citizen or authorized to work in the United States or possess a valid U.S. Immigration T-151 or 1-94, Alien Registration Card. If Contractor person is not a US Citizen, they must submit a foreign national visit request through the State Department and their embassy. This process can take up to 60 days.

1.13.3. Speaking, Reading, and Understanding English. Contractor will hire and staff personnel who can communicate with Government Representatives and where reading, understanding, and discussing environmental, health, and safety warnings are an integral part of personnel duties. Contractor’s personnel must be able to understand, read, write, and speak the English language fluently. English will be the only language used with regard to this contract for written correspondence, discussions and other business transactions.

1.13.4. Identification of Contractor Personnel.

a. The Government will issue ID badges to all Contractor personnel for the duration of the contract. ID Badges will be worn at all times during which personnel are performing work under this contract. Each Contractor (to include subcontractors) personnel will wear the ID Badge in a conspicuous place on the front of exterior clothing and above the waist except when safety or health reasons prohibit. A listing of personnel requiring identification cards will be furnished to the DGR prior to the contract start date and updated as needed to reflect Contractor and subcontractor personnel changes. If badged Contractor personnel are terminated, the DGR will be notified immediately.

b. All Contractor personnel, attending meetings and working in other situations where their Contractor status is not obvious to third parties, are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials.

c. Contractor personnel will ensure that all documents or reports produced by the Contractor are suitably marked as

Contractor products or that Contractor participation is appropriately disclosed.

1.13.5. Conflict of Interest.

a. Organizational Conflict of Interest. Contractor and subcontractor personnel performing work under this contract may receive, have access to, or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.), or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5, Organizational and Consultant Conflicts of Interest. The Contractor will notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and will promptly submit a plan to the KO to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO, and in the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

b. Employment of Government Personnel. The Contractor will not knowingly employ any person who is a U.S.

Government employee if employing that person would create a conflict of interest. Additionally, the Contractor will not knowingly employ any person who is an employee of the Government, either military or civilian, unless such person seeks and receives written approval according to DoD 5500.7-R, Joint Ethics Regulations (JER) by the individual’s commander or director. A copy of the authorization will be provided to the Government Representative.

In addition, the Contractor is prohibited from employing Government Quality Assurance Representatives (QAR) whom the Contractor knows or should have known are responsible for monitoring any contracts/subcontracts awarded to the service provider.

1.13.6. Conduct of Employees. Contractor personnel’s conduct will not reflect discredit upon the Government. The

Contractor will ensure that personnel present a professional appearance. Contractor personnel will observe and comply with all local policies and procedures concerning fire, safety, environmental protection, sanitation, security, and possession of firearms or other lethal or illegal weapons or substance. The Contractor is responsible for ensuring that any Contractor personnel providing items and services under this contract conduct themselves and perform in a professional, safe, and responsible manner. The Contractor will remove from the job site any employee for reasons of misconduct or security. IAW Department of Defense (DOD) Directive 5500.7-R, “Joint Ethics Regulation”, Contractor personnel must avoid being improperly influenced in the execution of their duties under the contract.

Particular attention should be paid to acceptance of gifts/ gratuities, and on non-disclosure of sensitive or classified information. The Contractor will ensure personnel conduct complies with 41 U.S. C 423 relative to release of acquisition related information or actions or discussions which may prejudice future competitions. The Contractor will ensure no personnel conduct political related activities or events on United States of America (USA) Facilities.

1.13.7. Contractor Vehicles. All vehicles and their operators entering Corry Station, Pensacola, FL will be properly licensed, registered, and insured according to state law.

1.13.8. Contractor Advertising. The Contractor will not place or display advertising signs of any kind on

Government property.

1.13.9. Supervision of Contractor Personnel. The Government will not exercise any supervision or control over

Contractor or Subcontractor personnel. Such personnel will be accountable solely to the Contractor, not the

Government. The Contractor, in turn, will be accountable to the Government for Contractor or Subcontractor personnel.

PART 2

DEFINITIONS, ACRONYMS & ABBREVIATIONS

2. Definitions and Acronyms.

2.1. Definitions.

2.1.1. Contract Administrator. The official Government Representative delegated authority by the Contracting

Officer to administer a contract. This individual is normally a member of the appropriate Contracting/Procurement career field and advises on all technical contractual matters.

2.1.2. Contractor. A supplier or vendor awarded a contract to provide specific supplies or services to the

Government. The term used in this contract refers to the prime.

2.1.3. Contractor Acquired Property. Property acquired, fabricated, or otherwise provided by the contractor for performing a contract and to which the Government has title.

2.1.4. Contracting Officer (KO). A person with authority to enter into, administer, and/or terminate contracts, and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

2.1.5. Controlled Area. A controlled space extending upward and outward from a specified point. This area is typically designated by a commander or director, wherein sensitive information or operations occur and requires limitations of access.

2.1.6. Defective Service. A service output that does not meet the standard of performance associated with the SOW.

2.1.7. Deliverable. Anything that can be physically delivered, but may include non- manufactured things such as meeting minutes or reports.

2.1.8. Equipment. A tangible item that is functionally complete for its intended purpose, durable, nonexpendable, and needed for the performance of a contract. Equipment is not intended for sale, and does not ordinarily lose its identity or become a component part of another article when put into use. Equipment does not include material, real property, special test equipment or special tooling.

2.1.9. Government Equipment Furnished. Government property that is incidental to the place of performance, when the contract requires contractor personnel to be located on a Government site or installation, and when the property used by the contractor within the location remains accountable to the Government.

2.1.10. Material. Property that may be consumed or expended during the performance of a contract, component parts of a higher assembly, or items that lose their individual identity through incorporation into an end-item. Material does not include equipment, special tooling, and special test equipment or real property.

2.1.11. Physical Security. Actions that prevent the loss or damage of Government property.

2.1.12. Property. All tangible property, both real and personal.

2.1.13. Provide. To furnish, as in Government-furnished property, or to acquire, as in contractor- acquired property.

2.1.14. Quality Assurance. The Government procedures to verify that services being performed by the Contractor are acceptable IAW established standards and requirements of this contract.

2.1.15. Quality Control. All necessary measures taken by the Contractor to assure that the quality of an end product or service will meet contract requirements.

2.1.16. Sensitive Property means property potentially dangerous to the public safety or security if stolen, lost, or misplaced, or that will be subject to exceptional physical security, protection, control, and accountability. Examples include weapons, ammunition, explosives, controlled substances, radioactive materials, hazardous materials or wastes, or precious metals.

2.1.17. Subcontractor. One that enters into a contract with a prime Contractor. The Government does not have privy of contract with the subcontractor.

2.1.18. Unit Acquisition Cost means:

a. For Government-furnished property, the dollar value assigned by the Government and identified in the contract;

and

b. For Contractor-acquired property, the cost derived from the Contractor’s records that reflect consistently applied generally accepted accounting principles.

2.1.19. Wide Area Work Flow (WAWF). A secure web based system for electronic invoicing, receipt, and acceptance. WAWF allows Government vendors to submit and track invoices and receipt/acceptance documents over the web and allows Government personnel to process those invoices in a real-time, paperless environment.

2.1.20. Work Day. The number of hours per day the Contractor provides services IAW the contract.

2.1.21. Work Week. Monday through Friday, except for Federal holidays unless specified otherwise.

2.2. Acronyms.

CA Corrective Action

CAP Contractor Acquired Property

CDR Contract Discrepancy Report

CFR Code of Federal Regulations

CIWT Center for Information Warfare Training

CST Central Standard Time

CMR Contract Manpower Reporting

DFARS Defense Federal Acquisition Regulation Supplement

DGR Designated Government Representative

DoD Department of Defense

DoN Department of the Navy

FAR Federal Acquisition Regulation

FFP Firm Fixed Price

FY Fiscal Year

GPC Government Purchase Card

IAW In Accordance With

ID Identification

JER Joint Ethics Regulation

KO Contracting Officer

NAS Naval Air Station

NLT No Later Than

OCI Organizational Conflict of Interest

OSHA Occupational Safety and Health Administration

PM Project Manager

QA Quality Assurance

QC Quality Control

SEM Security Engineered Machinery

WAWF Wide Area Work Flow

PART 3

GOVERNMENT FURNISHED ITEMS AND SERVICES

3. Government Furnished Items and Services.

3.1. The Government provides no items or services for this Performance Work Statement.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. Contractor Furnished Items and Responsibilities.

4.1. Contractor Furnished Items. Everything included in Part 4, its paragraphs and subparagraphs, is basic to the contract and should be included in the contract price.

4.1.1. The Contractor will provide all labor, supervision, transportation, vehicles, equipment, facilities and services required to perform work under this contract that are not listed under Section 3 of this Performance Work Statement.

4.2. Responsibilities of the Contractor.

a. The Contractor will provide a safe working environment for key consultants and all persons in his/her employ as prescribed by 29 CFR Part 1910 “Occupational Health and Safety”. The Contractor will be responsible for all damages to persons and property that occur in connection with the work and service under this contract, without recourse against the Government.

b. The contractor will dispose of all debris according to Florida regulations and best commercial business practices.

The contractor will return the workspaces/areas to its original condition upon services completion. All Fire / life safety regulations or codes and as well as the codes pertaining to each trade will be followed; Electrical work will be done in accordance with NEC standards and if permits are to be granted by NASP NAVFAC, then the contractor will coordinate all requests via NASP NAVFAC.

c. The contractor will ensure that all Navy safety policies are reviewed and methods approved by the base safety office. The method of inspections and repairs will meet all manufacturer applicable guidance. The use of Personal

Protection Equipment (PPE) is enforced.

PART 5

SPECIFIC TASKS

5. General. The Contractor will provide all skilled personnel, equipment, tools, supervision, and other items necessary to perform this prescribed project as defined in this Performance Work Statement to meet the requirements.

5.1. The Contractor will be responsible to perform this prescribed project as defined in this Performance Work

Statement (specifically subparagraphs 1.1.1 through 1.1.4.).

5.3. Warranty.

5.4. Deliverables. Provide fifteen maximum if (15) haul and dumps of the 40-Cubic Yard Roll Off Containers for building 3776 plus up to an additional twelve (12) additional 40 Cubic Yard Roll-Off Container haul and dumps at other Corry buildings.

5.4.1. Services. The Contractor will provide all service maintenance as defined in this Performance Work Statement.

5.5. Inspection Requirements. The Contractor will provide quality services and/or products IAW this contract. Upon completion of all work onsite, the Contractor and Government Designated Representative will conduct a final walk through and acceptance of the project by the Government. A detailed list of items that require contractor attention for completion/correction will be generated and submitted to the Contractor upon completion of the inspection. The list of discrepant items will be resolved by the Contractor before the project is considered complete and accepted by the

Government.

5.5.1. When the Contractor’s performance is unsatisfactory; a CDR will be issued. If a CDR has to be issued, the

Contractor will reply in writing, giving the reason for the unsatisfactory condition, and what corrective action has been taken; and procedures to prevent recurrence.

5.5.2. Upon service completion, the services invoices will be submitted via the applicable WAWF Table.

PART 6

APPLICABLE PUBLICATIONS AND FORMS

6. Applicable Publications (Current Editions).

6.1. The Contractor (to include Subcontractors) must abide by all applicable regulations, publications, manuals, and local policies and procedures hereby incorporated by reference.

a. 29 CFR 1910, Occupational Health and Safety

b. DoD 5500.7-R Joint Ethics Regulations (JER)

c. OPNAVINST 5530.14E CH-2, Navy Physical Security and Law Enforcement Program

d. OPNAVINST 5102.1D MCO P5102.1B, Navy & Marine Corps Mishap and Safety Investigation, Reporting, And

Record Keeping Manual

PART 7

THE FOLLOWING NAVSUP LOCAL TEXT IS HEREBY MADE PART OF THE STATEMENT OF

WORK/PERFORMANCE WORK STATEMENT.

AUTHORIZED CHANGES ONLY BY THE CONTRACTING OFFICER

(a) Except as specified in paragraph (b) below, no order, statement, or conduct of Government personnel who visit the Contractor's facilities or in any other manner communicate with Contractor personnel during the performance of this contract shall constitute a change under the "Changes" clause of this contract.

(b) The Contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and signed by the Contracting Officer, or is pursuant to specific authority otherwise included as a part of this contract.

(c) The Contracting Officer is the only person authorized to approve changes in any of the requirements of this contract and notwithstanding provisions contained elsewhere in this contract, the said authority remains solely with the Contracting Officer. In the event the Contractor effects any change at the direction of any person other than the

Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in charges incurred as a result thereof. The address and telephone number of the Contracting Officer is:

NAME: COMMANDING OFFICER

ADDRESS: NAVSUP FLCJ JACKSONVILLE FL

TELEPHONE: 904-542-9818