1.02 SOR.pdf

PDF 249 KB Posted

Attached to
Notice of Intent for Sole Source for NADA SCIENTIFIC N98-ND9130
Solicitation number
N0024426Q0072
Issued by

About this file

This is a Statement of Requirement (SOR) for the procurement of six (6) new Automotive Air Conditioning System Trainers, Model N98-ND9130, manufactured by NADA Scientific. The equipment will support training operations within the Construction Mechanic "C" School Automotive Air Conditioning course (CIN A-610-0052) at Naval Construction Training Center (NCTC) in Port Hueneme, California. The trainers must be factory new, fully assembled, and ready for instructional use upon delivery, with all manufacturer-standard components, accessories, documentation, and operational materials included.

The equipment shall feature an integrated R134a automotive air conditioning system with a piston compressor, condenser assembly, evaporator unit, expansion valve, pressure switch, thermostat, and dehydrating filter. The trainers must include fault simulation capability for instructional troubleshooting exercises and a troubleshooting device capable of simulating multiple system faults. Each unit shall be mounted on a stand with wheels for mobility and designed with a clear instructional layout for component identification and diagnostics. Electrical requirements specify 220V compatibility with maximum power consumption of approximately 2 kW, suitable for training laboratory installation. Delivery is required within 60-90 days after receipt of order (ARO) to Building 1300, 363 White House Way, Port Hueneme, CA 93043, with equipment properly packaged and palletized to prevent shipping damage. The contractor shall provide the standard manufacturer warranty covering defects in materials and workmanship. Acceptance will occur upon delivery and inspection to verify equipment is new, undamaged, complete with all required components, and capable of performing basic operational functions for instructional use.

View the file

Other files

File Type Posted
1.02 JA AC Trainer-Approved_Redacted.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATEMENT OF REQUIREMENT (SOR)

Procurement of Automotive Air Conditioning System Trainers (Model N98-ND9130)

Naval Construction Training Center (NCTC) Port Hueneme, California

1. Purpose

The purpose of this procurement is to purchase six (6) Automotive Air Conditioning System

Trainers, Model N98-ND9130, manufactured by NADA Scientific, to support training operations within the Construction Mechanic (CM) "C" School Automotive Air Conditioning course (CIN

A-610-0052) at Naval Construction Training Center (NCTC), Port Hueneme, California.

2. Scope of Work

The contractor shall provide six (6) new Automotive Air Conditioning System Trainers (Model

N98-ND9130), including all manufacturer-standard components, accessories, documentation, and operational materials required for full training capability. Equipment shall be factory new, fully assembled, and ready for instructional use upon delivery.

3. Equipment Description

The Automotive Air Conditioning System Trainer is a complete automotive HV AC training platform mounted on a chassis frame designed for instruction in the operation, maintenance, diagnostics, troubleshooting, and repair of modern automotive air conditioning systems.

4. Technical Requirements

• Integrated R134a automotive air conditioning system

• Piston compressor

• Condenser assembly

• Evaporator unit

• Expansion valve

• Pressure switch

• Thermostat

• Dehydrating filter

• Fault simulation capability for instructional troubleshooting exercises

• Troubleshooting device capable of simulating multiple system faults

• Mounted training platform on stand with wheels for mobility

• Clear instructional layout allowing component identification and diagnostics

• Maximum power consumption approximately 2 kW

5. Electrical Requirements

The trainer shall operate electrically and be compatible with a 220V electrical supply. Electrical configuration shall be suitable for training laboratory installation.

File details come from the government source that posted it. Updated .