0408-05-Abaco PPC11AP Upgrades-SOW Rev1_Redacted.pdf

This is a Statement of Work (SOW) for ABACO PPC11A Upgrades issued by the Naval Surface Warfare Center, Dahlgren Division (NSWCDD).

The contractor shall evaluate, repair if needed, and convert two PPC11A boards from Revision 6B6 to Revision 6C6 in accordance with Original Equipment Manufacturer (OEM) specifications. The two boards to be serviced are identified by serial numbers 1134 and 1040, with equipment numbers 14260442 and 14247050, respectively. The contractor must test each unit using contractor-provided diagnostic equipment, disassemble as required to identify components needing repair or replacement, and submit a quote to the Technical Point of Contact (TPOC) and Contracting Officer for approval before performing any repairs. Once modification funding is received, repairs shall be completed in accordance with IAW OEM specifications, and all boards must be tested post-repair to ensure compliance with OEM specifications. The contractor is responsible for coordinating with the TPOC regarding identified problems and correction steps, and shall return the repaired units to NSWCDD in protective packaging. The Government will provide the two PPC11A boards immediately after contract award. No travel is required for this work. The Government reserves the right to modify the contract at a later date to cover additional repair services or components identified during the initial inspection.