03320050-04046-03320050 COC CDRL DI-MISC-81356.doc

Data Item Description DOC document 91 KB Posted

Attached to
CONTAINER CART
Solicitation number
SPMYM221Q0425
Issued by

View the file

Other versions and copies of DI-MISC-81356

File Revision Posted Attached to
6210_0050 CDRL DI_MISC_81356A COC A0001 SIGNED.pdf Rev. A FIBER OPTIC CABLE
6210_0049 CDRL DI_MISC_81356A COC A0001 SIGNED.pdf Rev. A FIBER OPTIC CABLE
DI-MISC-81356A_DID CDRL A002.pdf Rev. A Pedestal Fixture Forging
C04 A002_DID_DI-MISC-81356A.pdf Rev. A NSWCCD Wire Rope Assemblies
DI-MISC-81356A_CDRL A003.pdf Rev. A Kline Racine Hydraulic Pump Replacement/Rebuild
CDRL A002 DI-MISC-81356A.pdf Rev. A High Temperature Dilatometer
CDRL A002 - DI-MISC-81356A.pdf Rev. A Anodic Coating of Aluminum Parts
CDRL A001 DID DI-MISC-81356A.pdf Rev. A Precision grinding services to be performed on a variety of government furnished property , including high-yield carbon steel cut plates.
FOUO A04.0 DID DI-MISC-81356A COC.pdf Rev. A Pressure Gauge, 0-3000 PSIG Meeting SPEC: MS33656-4
Attachment 7 - DI-MISC-81356A to CDRL A002.pdf Rev. A Electrodeposited Cadmium Plating
DI_MISC_81356A.pdf Rev. A B-2 FLIGHT CONTROL SURFACES
DI-MISC-81356A.pdf Rev. A MAGTF Common Handheld - M67854-18-R-2023
DI-MISC-81356A.pdf Rev. A MAGTF Common Handheld (MCH)
SPRTA116Q0025_DID_DI_MISC_81356A.pdf Rev. A HEADSET, MICROPHONE
A002 DI-MISC-81356A.pdf Rev. A Solicitation FA8224-12-R-0065 A-10 Fuselage Fixture
EXHIBIT A CDRL DI-MISC-81356 REV 2-27-2020.pdf Feb 27, 2020 CLOTH, LAMINATED
EXHIBIT A_10709377-00756-CDRL DI-MISC-81356 COC REV 10-18-2018.pdf Oct 18, 2018 SCREW CAP
EXHIBIT C_10709378-00625-CDRL DI-MISC-81356 COC REV 10-18-2018.pdf Oct 18, 2018 SCREW CAP
0109-02_-_Cisco_Flex_Pod_-__DID_DI-MISC-81356_A.pdf Revision not stated CISCO FLEXPOD
82910057_COC_CDRL_DI-MISC-81356.doc Revision not stated PAWL Arm assembly
Show all 20

Who attaches DI-MISC-81356

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SHIPYARD ENGINEERING AND PLANNING PROCEDURES MANUALADVANCE \D 3.60

ADVANCE \D 9.35

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved

OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Please DO NOT RETURN your form to either of these address. Send completed form to the Government issuing Contracting Officer for the Contract/PR No. Listed in Block E.

A. CONTRACT LINE ITEM NO.
B. EXHIBIT
C. CATEGORY
0002AA
A
MISC

D. SYSTEM/ITEM

E. CONTRACT/PR NO.
F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

CERTIFICATION/DATA REPORT

3. SUBTITLE

CERTIFICATE OF COMPLIANCE

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-81356A

5. CONTRACT REFERENCE

Per Statement of Work

6. REQUIRING OFFICE

PURCHASING ACTIVITY

7. DD 250 REQ

9. DIST STATEMENT REQUIRED

D

10. FREQUENCY

ONE TIME

12. DATE OF FIRST SUBMISSION

SEE BLOCK 16*

14. DISTRIBUTION

b. COPIES

8. APP CODE

N/A

11. AS OF DATE

N/A

13. DATE OF SUBSEQUENT SUBMISSION

N/A

A. ADDRESSEE

Final

Draft
Reg
Repro

16. REMARKS

Block 9: Distribution Statement D. Distribution authorized to DoD and DoD contractors only. Administration and operations only, effective 12/2/2020. Other U.S. requests shall be referred to COMNAVSEASYSCOM.

Block 12 - Certification/Data Report documentation shall be attached to the Invoice/Receiving Report located in Wide Area Workflow (WAWF) e-Business Suite: Invoice, Receipt, Acceptance, and Property Transfer (iRAPT).

Upon submission in iRAPT send email notifications to:

Brem.psns.wawfqa.fct@navy.mil

Acceptance/Rejection of Certification/Data Report documentation will be accomplished with the corresponding material and will not be accomplished prior to shipment of material.

RECIEVING OFFICER BLDG 514, ATTN: CODE 133

PUGET SOUND NAVAL SHIPYARD & INTERMEDIATE MAINTENACE FACILITY

1400 FARRAGUT AVE, BREMERTON, WA 98314-5001

N4523A
0
1
0
TOTAL
0
1
0
G. PREPARED BY
H. DATE
I. APPROVED BY
J. DATE
/s/ J. McCready
12/2/2020
/s/ L Cline
12/2/2020

DD Form 1423-1, JUN 90

Page 1 of 2 Page(s)

S/N 0102-LF-010-5600

Document Number: 03320050

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL
FOR THE CONTRACTOR

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as “provisioning,” “Configuration Management”, etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed on DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical-office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref., DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for items 1 through 15. Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in item 14; Desired medium for delivery of the data item.

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor’s performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data. These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government’s right to use the data shall be governed by the pertinent provisions of the contract.

DD Form 1423-1 (Back) FEB 2001

Page 2 of 2 Pages Document Number: 03320050

17. PRICE GROUP

18. ESTIMATED� TOTAL PRICE

Original

File details come from the government source that posted it. Updated .