Attachment J-3 - Case Mounts (002)a -Revised.pdf

Guiding Memory

Case 1.1

84.00

• Marshall Islands stick chart composed of wood and shells

• “L” shaped brass hooks with felt barriers on fabric wrapped Obomodulan 500 panel

• Wrapped OBO panel to be provided by

Contractor

• Special mount for attaching backing/ L-shaped pins

28 ½” x 36 ¼” x 1 ¼”

1 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Case 1.2

Complex Mount

86.00

• Wood, metal, beads on string

• Complex mount, materials TBD

• L shaped brackets w felt near handle

• Fabric covered wedge 10 degrees off vertical

• Wedge to hang on cleat

• Small pillow to support beads

• 11 ½” x 7 ½” x 1”

2 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Case 1.3

Tibetan Thangka Hand-painted scroll mounted on brocaded fabric with silk cover and weighted rod

030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Case 1.3 Cont’d/Tibetan Thangka

Textile Mount

82.00

• Hand painted scroll mounted on brocaded fabric with silk cover and weighted rod

• Fabricate cover for silk veil

• Object is on existing backboard, needs additional support/shelf or lip at bottom to rest on

• Mount maker will fabricate supports

• Requires a lip at bottom of OBO panel

• Possible valence at top to roll fabric into

• Textile conservator to also be consulted

• Materials TBD

• 59”x 36 ¼” x 2 ¼”

• Fabric board: 71 3/4”x 42 3/8”

4 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 10-23-2023 (19 Pages)

Memorialization and Commemoration

Case 1.4

Contents of Lincoln’s Pockets Viewing deck may be on a slant, may be flat, TBD

5 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Contents of Lincoln’s Pockets Cont’d/Case 1.4

96.00

• Lincoln’s wallet, special mount

• Conservation will provide Vivak mount

• Requires a lip with pin mount

• 3 ¾” x 6 5/8” x 7/8”

96.00.02

• Lincoln’s pocketknife

• Brass bracket mount

¾” x 3 ½” x ½”

96.00.03

• Lincoln’s folding glasses

• Brass bracket mount

• 1 ½” x 3 5/8” x 1

• Special mount? Fragile

96.00.04

• Lincoln’s leather glasses case

• Brass bracket mount

• 1 1/8” x 2 ¼” x 1

96.00.05

• Lincoln’s watch fob

• Brass bracket mount

• 2” x 7/8” x ¾”

96.00.06

• Lincoln’s confederate 5 dollar bill

• Special mount, materials TBD

• Conservation will mount to back board

• Conservation will provide Vivak mount

• Requires a lip with pin mount

• 3” x 7 1/8”

030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Contents of Lincoln’s Pockets Cont’d/Case 1.1

96.00.07

• Lincoln’s glass lens cleaner

• Spider mount

• 1 ¼” x 1 ¼” x 15/16”

96.00.08

• Lincoln’s sleeve button

• Spider mount

• ¾” x ¾” x 3/8”

96.00.01

• Lincoln’s handkerchief, special mount

• Conservation will provide Vivak support

• Requires a lip with pin mount

• 6 ¾” x 6 ¾” x ½” (folded)

7 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Mechanics of Memory

Case 2.3

Small Pin Mount

63.00

• Greek terra cotta bust, 6th-1st century BCE from

Freud Collection

• To be secured with small pins at base

• 6 ¼” x 2 ¼” x 2 ¼”

8 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Recording and Retelling

Case 2.5

9 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Case 2.5 Cont’d

Round Object Mounts

40.00

• Record album

• Round plexi disk with dowel to hold disc in place

• 2 “L” shaped brass brackets to mount to shelf

• 11 3/4” circumference

44.00

• Gold record album

• Round OBO shelf w plexi disk attached w plexi dowel to hold in place

• 2 “L” shaped brackets mounted to OBO shelf

• 11 7/8” circumference place holder image 72.01

• Rubber record album (slightly warped)

• Special mount on circular riser

• Pins required to hold in place

• 7” diameter

10 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Recording and Retelling

Case 2.6

Scroll Mount

33.00

• Paper Scroll

• Must display flat, needs supports inside both sides of scroll

• Mount needs anchors or straps to hold both ends of rolled scroll in place

• 3 ¾” x 37” x 10 ¾”

11 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Homeland

Case 3.3

Complex Mount

108.00

• Leaded crystal flute

• Complex mount, materials TBD

• Small brass brackets/rods to hold flute in place

• 24” length approximate, needs to be measured

12 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Collected Stories, Collected Experiences

Case 3.5

13 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Case 3.5 Cont’d

Rod for Textile Mount

99.00

• Blackwell family chart on canvas

• Special mount

• Needs a rod wider than canvas/2 “L” shaped brackets to hang directly to center OBO panel

• No pitched panel as shown, will be hung flat

• Has 3 ¼” pocket for rod sewn into upper fabric

• 80 5/8” x 71 ¾” x 3/16”

14 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Collected Stories, Collected Experiences

Case 3.6

Spider Mounts

59.00 & 59.00.01

• 2 Pins

• Spider mounts

• 1” x 1 ½” x ¼” (59.00) & 1” x 1 3/8” x 3/16”

(59.00.01)

60.00.01

• Glass bottle

• Brass bracket mount at an angle

• Requires a backing rod

• Materials TBD

• 5 7/8” x 2” x 3/4” Box: 3 3/8” x 3 5/8” x 3 5/

15 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Personal Narratives

Case 4.3

16 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Case 4.3 Cont’d

Textile Mount

16.00

• Hooked textile rug

• Strips of Velcro needed to attach to large fabric covered panel

• Requires large OBO fabric wrapped panel provided by Contractor

• May require extra batting

• 53 ¼” x 43 ¼” x ½”

17 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Compendium of Knowledge

Case 4.6

18 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)

Case 4.6 Cont’d

Textile Dress Mount

25.00

• Victorian lace black dress with 45 scrolls, mount maker to fabricate supports

• Custom mannequin to be provided by LOC

• Determine display of veils, fans, and cloth bouquets

• Textile conservator also required to pad out dress

• Large OBO fabric wrapped panel to be provided by Contractor for dress to be placed on

• 76” height

19 030ADV23Q0161 - Attachment J-3 - Case Mounts (002)a - 5-02-2023 (19 Pages)