(02) SOW AC Replacement at Bienville Ranger Office.pdf
PDF 2 MB Posted
- Attached to
- Bienville CON Ranger Office AC Replacement Federal contract opportunity
- Solicitation number
- 12444224Q0008
- Issued by
- Department of Agriculture Forest Service
About this file
This statement of work describes a project to replace an HVAC unit on a manufactured home that is part of the Bienville Ranger District Office. The project involves removing an old HVAC unit that is leaking and installing a new 3-ton heat pump vertical wall mount unit with secondary electric heat strips. The location is provided as the Bienville National Forest in Scott County, Mississippi, with directions and a map included. Upon completion, the contractor must remove all trash, excess materials, and old equipment from the Forest Service property and leave the site in the same condition prior to starting work.
The related federal contract opportunity posted on SAM.gov is soliciting to replace the air conditioner unit on the modular office building at the Bienville Ranger District Office for the Department of Agriculture Forest Service.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFQ 12444224Q0008 Questions and Answers.pdf | ||
| SF 1449.pdf | ||
| (01) WD SCA 2015-5167 Scott County MS.pdf | ||
| Bienville CON Ranger Office AC Replacement RFQ.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
One HVAC Replacement on the Manufactured Home Portion of Bienville District Office
Project Description
The District Office location is at the Bienville National Forest in Scott County. Legal description: Forest, MS Quad; Sec.15, T6N, R8E. The directions for finding the District Office are to take Interstate 20 to Forest/Raleigh exit 88 at Forest, MS. At the Forest exit, take State Route 35 north and continue for two miles. The entrance to the office will be on your right. This project will involve the removal of an old HVAC unit and the installation of a new HVAC unit on a manufactured home on the southwest corner of the manufactured home portion of the ranger office.
Description of Work
The following is a picture of the tag for the manufactured home HVAC system at the Bienville ranger office.
HVAC Tag
The Forest Service will need a new unit for a manufactured housing 3-ton heat pump vertical wall mount HVAC with secondary electric heat strips to replace the leaking unit. See the picture below of the HVAC unit on the building.
HVAC Unit on the Building
Note: After completion of the project, all trash, excess building materials, and old HVAC equipment shall be removed and disposed of off the Forest Service property. Leave project as you found it when you started.
See next page for a project location map.
Location Map
File details come from the government source that posted it. Updated .