0160-6934 drawings.pdf
PDF 639 KB Posted
- Attached to
- SPMYM2-20-Q-2291 Federal contract opportunity
- Solicitation number
- Not on record
About this file
This document contains technical specifications for ultrasonic calibration standards to be procured by the Defense Logistics Agency Land and Maritime under solicitation SPMYM2-20-Q-2291. The specifications describe various sizes of electroplated carbon steel standards with machined notch depths ranging from 0.1 to 4.8 inches from the scanning surface. Standards will be engraved with material alloy, serial number and measured notch dimensions. Surface finishes, tolerances, and inspection requirements are also delineated.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 20-Q-2291.pdf | ||
| 0160-6934 ordering data.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1.25 scan surface
Ultrasonic Calibration Standard Standard
Size/Description 12.00" x .500" x 1.25"
Material- HY 80 ( MIL-S-16216 Plate)
Engrave material alloy and serial number on one side only.
Engrave the notches distance as measured from the scan surface (i.e. .300) on both sides of the item.
If other than measurments noted below engrave actual measured dimension (ex: .301).
scan surface
.450 .400
.300 .200 .100
12.00
.500 2.00 typ
NOTES:
1. EDM Notchs depth from scanning surface tolerance +/- .002, notch width tolerance .015 +/- .001.
2. Notches shall be parrellel to the scan surface with in 1 degree.
3. A certified dimensionally qualified mechanic shall take measurements and record results.
4. All units are in inches.
5. Surface finish of 125 Ra phonographic finish on scanning surfaces and 63 Ra on all other surfaces.
6. Carbon steel standards shall be electroplated to .001" with nickel for corrsion resistance.
Ultrasonic Calibration Standard Standard
Size/Description 12.00" x 1.000" x 1.25"
Material- HY 80 ( MIL-S-16216 Plate)
Engrave material alloy and serial number on one side only.
Engrave the notches distance as measured from the scan surface (i.e. .500) on both sides of the item.
If other than measurments noted below engrave actual measured dimension (ex: .501).
scan surface
.900 .800 .700 .600 .500
12.00
1.000
2.00 typ
NOTES:
1. EDM Notchs depth from scanning surface tolerance +/- .002, notch width tolerance .015 +/- .001.
2. Notches shall be parrellel to the scan surface with in 1 degree.
3. A certified dimensionally qualified mechanic shall take measurements and record results.
4. All units are in inches.
5. Surface finish of 125 Ra phonographic finish on scanning surfaces and 63 Ra on all other surfaces.
Ultrasonic Calibration Standard Standard
Size/Description 12.00" x 2.000" x 1.25"
Material- HY 80 ( MIL-S-16216 Plate)
Engrave material alloy and serial number on one side only.
Engrave the notches distance as measured from the scan surface (i.e. 1.400) on both sides of the item.
If other than measurments noted below engrave actual measured dimension (ex: 1.401).
scan surface
1.800 1.600 1.400 1.200 1.000
12.00
2.000
2.00 typ
NOTES:
1. EDM Notchs depth from scanning surface tolerance +/- .002, notch width tolerance .015 +/- .001.
2. Notches shall be parrellel to the scan surface with in 1 degree.
3. A certified dimensionally qualified mechanic shall take measurements and record results.
4. All units are in inches.
5. Surface finish of 125 Ra phonographic finish on scanning surfaces and 63 Ra on all other surfaces.
Ultrasonic Calibration Standard Standard
Size/Description 12.00" x 3.000" x 1.25"
Material- HY 80 ( MIL-S-16216 Plate)
Engrave material alloy and serial number on one side only.
Engrave the notches distance as measured from the scan surface (i.e. 2.400) on both sides of the item.
If other than measurments noted below engrave actual measured dimension (ex: 2.401).
scan surface
2.800 2.600 2.400 2.200 2.000
12.00
3.000
2.00 typ
NOTES:
1. EDM Notchs depth from scanning surface tolerance +/- .002, notch width tolerance .015 +/- .001.
2. Notches shall be parrellel to the scan surface with in 1 degree.
3. A certified dimensionally qualified mechanic shall take measurements and record results.
4. All units are in inches.
5. Surface finish of 125 Ra phonographic finish on scanning surfaces and 63 Ra on all other surfaces.
4.0003.800 3.600 3.400 3.200 3.000
3.75 2.00 2.00 2.00 2.00 2.00 scan surface scan surface
Ultrasonic Calibration Standard Standard Serial No. ###-#### (will be provided upon request)
Size/Description 13.75" x 4.00" x 1.25"
Material- HY 80 ( MIL-S-16216 Plate)
Engrave material alloy and unique serial number on one side only.
Engrave the notches distance as measured from the scan surface (i.e. 3.800) on both sides of the item.
If other than measurments noted below engrave actual measured dimension (ex: 3.801).
13.75
NOTES:
1. EDM Notchs depth from scanning surface tolerance +/- .002, notch width tolerance .015 +/- .001.
2. Notches shall be parrellel to the scan surface with in 1 degree.
3. A certified dimensionally qualified mechanic shall take measurements and record results.
4. All units are in inches.
5. Surface finish of 125 Ra phonographic finish on scanning surfaces and 63 Ra on all other surfaces.
Ultrasonic Calibration Standard Standard Serial No. ###-#### (will be provided upon request)
Size/Description 17.00" x 5.00" x 1.25"
Material- HY 80 ( MIL-S-16216 Plate)
Engrave material alloy and unique serial number on one side only.
Engrave the notches distance as measured from the scan surface (i.e. 4.800) on both sides of the item.
If other than measurments noted below engrave actual measured dimension (ex: 4.801).
NOTES:
1. EDM Notchs depth from scanning surface tolerance +/- .002, notch width tolerance .015 +/- .001.
2. Notches shall be parrellel to the scan surface with in 1 degree.
3. A certified dimensionally qualified mechanic shall take measurements and record results.
4. All units are in inches.
5. Surface finish of 125 Ra phonographic finish on scanning surfaces and 63 Ra on all other surfaces.
6. Carbon steel standards shall be electroplated to .001" with nickel for corrsion resistance.
3.50 scan surface
1.25scan surface
17.00
5.0004.800 4.600 4.400 4.200 4.000
2.252.252.252.254.50
File details come from the government source that posted it. Updated .