Design, develop, fabricate, test, and deliver a small scale test stand capable of performing dynamic performance testing of water lubricated bearings
This is a FFP Sole Source Award. Awarded contract N6449822C0002 to DURAMAX MARINE, LLC for 405080.00 on 2022-01-20. DA-083 Department of the Navy Naval Sea Systems Command
2/2/22, 11:13 AM BEARING TEST PARTS
The Department of the Navy Naval Air Systems Command is issuing a solicitation for the procurement of various bearing test parts, including seal plates, rear heaters, shafts, and slingers, under Solicitation N0042124Q0503. This is a firm fixed-price purchase order on a brand name basis under FAR Part 12 and FAR Part 13. All responding vendors must be registered in the System for Award Management (SAM) Database, and the procurement is not set aside for small business, but preference will be given to small business. Offers must be submitted by September 11, 2024, and must be Trade Agreement Act (TAA) compliant. Award will be made on an all-or-none basis to the offeror whose initial offer represents the best price and technical acceptability.
This procurement is not set aside for small business, but small business preference will be given. The place of performance is Patuxent River, Maryland. The solicitation does not provide any information about potential incumbents or current contractors, nor does it specify any award values or budget ranges. The quantity of goods required is not explicitly stated, and the timeline for services is not provided.
N0042124Q0503 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
9/5/24, 11:16 AM Bonn 2 Spare Generator Guide Bearing
This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation W66QKZ93236575 for fabricating and delivery of two Generator Guide Bearing sets, is issued as a Request for Quote (RFQ). See attached request for quote, specifications, and drawings. The following solicitation document, incorporated provisions, and clauses are in effect tough Federal Acquisition Circular 2020-03. This solicitation has been set aside for 100% Small Business under NAICS 332710, with a small business size standard of 500 employees. All prospective offerors must be registered in the System for Award Management (SAM) at www.sam.gov. Lack of SAM registration will deem an offeror ineligible for award. The Contract Specialist for this acquisition is Robert B. Miller, (503) 808-4615; Robert.b.miller@usace.army.mil. W66QKZ93236575 Department of the Army Corps of Engineers Engineering District Portland
5/29/20, 3:39 PM Bearing Test Stand Upgrades
The Naval Air Warfare Center - Aircraft Division (NAWC-AD) intends to negotiate and award a new sole source purchase order to MOOG Incorporated, Industrial Controls Division, 300 Jamison Rd – Plant 11, Elma, NY 14059. This purchase order will improve the availability and affordability of airframe bearings to the fleet tough upgrades to the existing NAWC-AD Airframe Bearing Lab (NAB) High Speed Bearing Test Stand. These upgrades will enable qualification of additional vendors to high speed oscillating bearing standards, and will also support engineering investigations and improvement projects. This contract will be awarded using FAR Part 12, in conjunction with FAR Part 13.5, policies and procedures. MOOG incorporated is the original equipment manufactuer of the current Bearing Test Stand. The Government does not own the techncial data rights for the current Bearing Test Stand. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. No phone inquiries will be entertained. However, responsible interested parties may submit questions or a capability statement in which they identify their interest and capability to respond to this requirement in writing via e-mail to the attention of erik.k.seastrand.civ@us.navy.mil and clairee.dawson.civ@us.navy.mil. A determination by the Government not to compete this procurement based upon responses to this notice is solely within the discretion of the Government. The Government will not pay for any information received. The Government intends to use the policies and procedures of FAR Part 12, in conjunction with FAR Part 13.5, for this acquisition. N0042123Q0086 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
2/2/23, 3:31 PM Bearing Test Stand Upgrades
1.0 INTRODUCTION A. The Naval Air Warfare Center, Aircraft Division (NAWC-AD) is seeking information for potential sources regarding upgrades to existing test system used for qualification testing of airframe bearings. The scope of work will provide the procurement and installation of test system upgrades to be used at the NAWCAD Airframe Bearings Laboratory (NABL). The NABL is a testing facility that evaluates standard and nonstandard bearings. B. This Market Research tool is being used to identify potential technologies and eligible firms, of all sizes, prior to determining the method of acquisition and issuance of a solicitation. The results of the Sources Sought will be utilized to determine if any Small Business Set-Aside opportunities exist. C. The following documents are attached to this Sources Sought Notice: 1. Draft Statement of Work (SOW) D. The following dates are anticipated time frames associated with this requirement: 1. Estimated Final RFP Release: 06 FEB 2023 2. Estimated Award Date: 10 APR 2023 3. Delivery Date: 01 SEP 2024 2.0 DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. 3.0 SPECIAL REQUIREMENTS AND REQUIRED CAPABILITIES All equipment provided shall be compatible with and/or capable of being integrated with the existing equipment identified in paragraph 1.2 of the SOW. 4.0 ELIGIBILITY a. The applicable NAICS code for this requirement is 334515, Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a Small Business Size Standard of 750 Employees. b. The Product Service Code is H231, Equipment and Materials Testing - Bearings. c. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Note: FAR 52.219-14 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count “first tier subcontracted” work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2020-O0008 dated 04/03/20 at https://www.acquisition.gov/browse/index/far). d. To assist in our market research and determination of any applicable small business set-aside for this effort, if you are a small business interested in priming this effort and plan to utilize “similarly situated entities” to meet the Limitations on Subcontracting, please identify the name & CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned similarly situated entity should be included in answering any questions outlined in the Sources Sought Notice (SSN) in order to assist the Government’s capability determination. 5.0 SUBMISSION DETAILS Interested parties shall submit a document outlining their capabilities in meeting the special requirements and required capabilities as outlined in paragraph 3.0 of this Sources Sought Notice, taking into consideration the information also provided in Attachment 1, draft SOW. Interested parties shall adhere to the following instructions for the submittal of their capabilities statements. a. Page Limit and Format: Five (5) 8.5 X 11 inch pages in Times New Roman font of not less than 10 point. b. Document Type: Microsoft Word, Adobe PDF, etc. c. Delivery: Electronic-mail (Email) Submission to the Contract Specialist, Erik Seastrand at erik.k.seastrand.civ@u.navy.mil d. Response date: Responses are due by 11:59:59PM Eastern Standard Time on 03 JAN 2023. e. No classified information shall be submitted in response to this Sources Sought. f. No phone calls will be accepted. g. All questions must be submitted via email to the Contract Specialist, Erik Seastrand at erik.k.seastrand.civ@u.navy.mil. h. All responses shall include Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, and Points of Contact (POC), including names, phone numbers, and email addresses. i. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Any information or materials provided in response to this Sources Sought Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice. N0042123Q0086 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
12/19/22, 12:17 PM