Electronic Timing System
Added: Aug 13, 2010 12:05 pm
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.(i)Interested contractors may identify their interest and capability by submitting their proposal. (ii) The solicitation number is W911QX10T0114. This acquisition is issued as a Request for Quote (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-44 effective 08 July 2010. (iv) This acquisition is set-aside for small business. The associated NAICS code is 334518. The small business size standard is 500. (v) The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): CLIN 0001; One (1) each Electronic Timing system with at least 25 permanently installed timing points, including all required cables, batteries and hardware; No above ground wiring; System operational in all weather conditions; System controlled from inside the adjacent SPEAR building; SPEAR building currently under construction and timing system shall be installed after construction completion on or about 1 June 2011. Minimum detection frequency of 250 Hz; Minimum accuracy of less than or equal to 0.004 seconds; Synchronized timing points using GPS or an equivalent method; Amount of time between two detections of the same tag at a single timing point adjustable from 0 sec to 10 minutes to prevent double detections; Detects at least 12 participants crossing timing point at one time; Data collection software displays results in real time and exports results to a Microsoft Access database that can send data to be processed with MATLAB, SPSS and/or LabView; Software does not require an annual license; Provides the following data each time the participant crosses a timing point: study name, tag ID, subject number, condition, trial number, timing point ID, and time of day, displays time accurate to milliseconds; Participants can wear or carry metal objects without compromising the accuracy of the system; 50 reusable tags for participants to wear that will not affect their ability to navigate the obstacle course; 50 reusable straps for attaching the tags to participants. Contractor shall install system at the Known Distance (KD) Range obstacle course, Rifle Range Rd., Aberdeen Proving Grounds, Aberdeen, MD 21005-5001 on or about 1 June 2011. After installation, contractor shall provide one eight-hour day of training on system operations at the KD Range. (vi) Description of requirements: Provide and Install Electronic Timing System. (vii) Delivery location is Known Distance (KD) Range, US Army Research Laboratory, Aberdeen Proving Grounds, MD. Acceptance shall be performed at Aberdeen Proving Grounds, MD. FOB Destination. (viii) The provision at 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The following addenda have been attached to this provision: None (ix) The provision at FAR 52.212-2, Evaluation - Commercial Items is applicable to this acquisition. The specific evaluation criteria to be included in paragraph (a) of that provision are as follows: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical, Past Performance and Price. The Technical element of the evaluation will be a determination as to whether the proposed product meets the performance characteristics and specifications in the solicitation. The Technical element of the evaluation shall be based solely on information furnished by the vendor. The Government is not responsible for locating or securing any information, which is not identified in the proposal. To ensure sufficient information is available, vendors shall furnish as part of their proposal all descriptive material (such as cuts, illustrations, drawings, or other information) necessary for the Government to determine whether the product meets the performance characteristics and specifications of the requirement. If the offeror proposes to modify a product so as to conform to the requirement of this solicitation, the offeror shall include a clear description of such proposed modifications and clearly mark any descriptive materials to show modifications. Past performance will be evaluated based on information provided by the offeror as to actual sales of the proposed product to industry or Government agencies. Past performance will consider the ability of the offeror to meet technical specifications, delivery schedules (with warranty fulfillment and maintenance reputation included as applicable). Offerors shall include 3 records of sales from the previous 12 months. Offerors shall identify a point of contact for each sale by providing a name and telephone number. Price will be evaluated based on the total proposed price, including options, (if any).Technical and past performance are of equal importance and when combined are significantly more important than price. The Government reserves the right to award to other than the lowest price and to award without discussions. (x) (x) Offerors shall complete the annual representations and certificates electronically at http://orca.bpn.gov or include a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items with its offer. Offerors shall include DFARS 252.212-7000, Offeror Representations and Certifications -Commercial Items, with its offer. (xi) The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause. None (xii) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, applies to this acquisition. The following additional FAR/DFARS clauses cited in this clause are applicable: 52.203-6 Restrictions on Subcontractor Sales to the Government; 52.219-6 Notice of Total Small business Set Aside; 52.219-8 Utilization of Small Business Concerns; 52.219-14 Limitations on Subcontracting: 52.219-28 Post Award Small Business Program Representation; 52.222-3 Convict Labor; 52.222-19 Child Labor-Cooperation with Authorities and Remedies; 52.222-21 Prohibition of Segregated Facilities ; 52.222-26 Equal Opportunity; 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37 Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; 52.222-50 Combating Trafficking in Persons; 52.225-13 Restrictions on Certain Foreign Purchases; 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration; 52.232-36 Payment by Third Party; 252.203-3 Gratuities; 252.225-7001 Buy American Act and Balance of Payments Program; 252.232-7003 Electronic Submission Of Payment Requests; 252.243-7002 Request for Equitable Adjustment. Clauses and provisions are incorporated by reference and apply to this acquisition. Full text of the clauses and provisions can be obtained at http://farsite.hill.af.mil/ (xiii) The following RDECOM local provisions will be incorporated into any resultant contract: 52.004-4409 RDECOMCC Point of Contact; 52.004-4411 Technical Point of Contact; 52.016-4407 Type of Contract; 52.005-4401 Release of Information; 52.032-4418 Tax Exemption Certification. A copy of the full test of these provisions will be made available upon request (xiv) This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as: None. (xv) The following notes apply to this announcement: None (xvi) Offers are due on 25 August 2010, by 10:00 AM Mountain Daylight Time (MDT), at the US Army Research Laboratory, CRD-AD-WS, Bldg 1624, White Sands Missile Range, NM 88002-5512 or via email hortensia.e.tellez@us.army.mil. (xvii) For information regarding this solicitation, please contact Hortensia E Tellez at 575-678-0697 or email at hortensia.e.tellez@us.army.mil.
W911QX10T0114 Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground
8/13/10, 12:05 PM 63-Alarm and Signal, and Security Detection Systems
Added: Aug 14, 2009 9:48 am
This solicitation is being issued as a total small business set aside for Key Cabinets delivered to the Defense Commissary Agency stores in the continental United States and overseas. A requirements-type contract with a base and two option years will be used. The invitation for Bid (IFB) will be issued on or about September 1, 2009 and will close approximately September 23, 2009. NAICS code is 334518 and the Business Size is 500. This solicitation will be posted to the FedBid website. Bids will be received through reverse auction via the online procurement services, FedBid at www.fedbid.com. By submission of a bid, the bidder acknowledges the requirement that a prospective awardee must be registered in the Central Contractor Registration (CCR) database prior to award of any contract resulting from this solicitation. Further information about registration may be found on the internet at www.ccr.gov.
HDEC04-09-B-0007 Defense Commissary Agency
8/14/09, 9:48 AM TIMER DELAY ASSEMBLY
Added: Jan 08, 2009 3:03 pm
This Request for Proposal replaces Request for Quote W58P05-09-T-0003. Initially the Government had a requirement for 450 Timer Delay Assemblies, but that quantity has increased to 1,000. The U.S. Army Research, Development and Engineering Command Acquisition Center, Natick Contracting Division has a requirement for the manufacture and delivery of Timer Delay Assembly (M1 and M2 Release), NSN 1670-01-099-2380, Part Number 11-1-894-1, Quantity 1,000 each. The Government anticipates that this acquisition will result in a Firm Fixed Price Contract. The North American Industry Classification System, NAICS is 334518. This solicitation is open to both Large and Small Businesses. The units will be shipped to, SU Transportation Officer, DDSP, New Cumberland Facility, 2001 Normandy Drive, Door 113-134, New Cumberland, PA 17070-5002. Delivery will be 100 each due within 60 days after contract award and 100 per month thereafter. The Request for Proposal along with drawings will be posted on the Natick website: https://www3.natick.army.mil and ASFI website: https://acquisition.army.mil/asfi/, ON OR ABOUT: January 30, 2009. The closing time and date for this Request for Proposal will be 30 days after release of the Request for Proposal. Firms will not be reimbursed for any costs associated with proposal preparation. Only virgin material is to be used in the manufacturing of these units. BERRY AMENDMENT WILL APPLY. Questions may be addressed by email to: hortense.magerowski @us.army.mil or faxed to (508) 233-5852.
W58P0509R0018 Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground
1/8/09, 3:03 PM