Alloy 17200 Beryl. Copper TF00 (at cond. ) ASTMBM196 1. 50â dia
Added: Dec 14, 2011 7:14 pm This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under authority FAR 13, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (http://www.neco.navy.mil/). The RFQ number is N00244-12-T-0052. This solicitation documents and incorporates provisions and clauses in effect tough FAC 2005-54 and DFARS Change Notice 20111207. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm The proposed contract is 100% set aside for small business concerns. The NAICS code is 331411 and the Small Business Standard is 1,000. This is a competitive, restricted action. The proposed contract action is for Alloy 17200 Beryl. Copper TF00 (at cond.) ASTMBM196 1.50” dia. Must be 10-12 feet length (see attached for specifications). The Fleet Logistics Center San Diego (FLCSD) requests responses from qualified sources capable of providing: CLIN 0001 Alloy 17200 Beryl. Copper TF00 (at cond.) ASTMBM196 1.50” dia. Must be 10-12 feet length QTY: 30 FT. Requested delivery is January 3, 2012 ADC; Delivery Location is: FLEET READINESS CENTER SOUTHWEST RICK CONSTANTINO DLA/ FRCSW, CAN 37, 1 ST AND UTGOFF ST. N SAN DIEGO CA 92135-7058 Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: 52.204-7 Central Contractor Registration 52.211-17 Delivery of Excess Quantities 52.212-1, Instructions to Offerors - Commercial Items; 52.212-3 and its ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Items. 52.219-6 Notice of Total Small Business Set Aside 52.233-3 Protest After Award 52.233-4 Applicable Law for Breach of Contract Claim 52.237-2 Protection of Government Buildings, Equipment, and Vegetation 52.242-15 Stop Work Order 52.242-17 Government Delay of Work 52.243-1 Changes- Fixed Price 52.246-2 Inspection of Supplies-Fixed Price 52.247-34 F.O.B. Destination DFAR provision and clauses are applicable to this procurement: 252.204-7003 Control of Government Personnel Work Product 252.212-7001Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items 252.225-7001 Buy American Act and Balance of Payments Program 252-225-7002 Qualifying Country Sources As Subcontractors Executive 252.225-7008 Restriction on Acquisition of Specialty Metals (JUL 2009) 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals (JAN 2011) 252.232-7010 Levies on Contract Payment 252.243-7001 Pricing of Contract Modifications Quoters shall include a completed copy of 52.212-3 and it’s ALT I with quotes. All clauses shall be incorporated by reference in the order. Additional contract terms and conditions applicable to this procurement are: DFARS 252.212-7000, Offeror Representations and Certifications - Commercial Items; DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items including 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports This announcement will close at 12 PM HST on Wednesday, December 21, 2011. Contract Specialist contact info is (808) 473-7625 or email leilani.mutu@navy.mil . [A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government.] [Oral communications are not acceptable in response to this notice.] All responsible sources may submit a quote which shall be considered by the agency. Central Contractor Registration (CCR). Quoters must be registered in the CCR database to be considered for award. Registration is free and can be completed on-line at http://www.ccr.gov/ . All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Quotes over 10 pages in total will not be accepted by facsimile. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. N0024412T0052 Department of the Navy Naval Supply Systems Command
12/14/11, 7:14 PM General Purpose Information Technology Equipment
-- FA8250-09-Q-80594 Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base
6/11/09, 11:58 AM Extruded C18000 Copper Bars
Added: Feb 18, 2009 8:57 am The Naval Research Laboratory intends to award to The Cadi Company Inc, on other than full and open competitive basis for 14 ea C18000 Copper 1.020 (+/-.008) X 2.020 (+/-.012) X 250 (+/- 2) length for a total of 2200 lbs (+/-10%) at approximately 165 lbs per bar. Additional specifications will appear in the RFQ. Sole source based on continued development to The Cadi Company Inc. (Microsoft IE Required). The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Note: All offerors will be ineligible for award unless they have registered in DOD(s) Central Contractor Registration database. Information on CCR registration and annual confirmation requirements can be obtained via Internet at http://www.ccr.gov or by calling 1-888-227-2423. N00173-09-Q-0064 Department of the Navy Secretary of the Navy Office of Naval Research
2/18/09, 8:57 AM Sources Sought Notice for Nickel-Chromium-Columbium Alloy pipes.
Added: Jun 19, 2012 3:27 pm Sources sought notice & Request for Information. This is a Request for Information (RFI) only. No solicitation is available at this time. The purpose of this RFI is to gauge vendor interest to properly plan for a future solicitation. No award will be made based upon responses to this RFI. This RFI is released pursuant to FAR 15.201e, Exchanges with Industry. Fleet Logistics Center Norfolk – Portsmouth Naval Shipyard Annex is seeking sources to provide the following: 2,820 inches of 3” pipe in accordance with Attachment "1" 960 inches of 4” pipe in accordance with Attachment "2" 960 inches of 2” pipe in accordance with Attachment "3" 960 inches of ½” pipe in accordance with Attachment "4" 960 inches of 2” pipe in accordance with Attachment "5" All are Level I, QA-A, pipes. All to be Nickel-Comium-Columbium Alloy, seamless in accordance with ASTM B444 (year 2000 or later). In accordance with FAR 15.202e, responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Pricing information should not be submitted at this time. Please see the attached documents for more detailed information. N0018912QP135 Department of the Navy Naval Supply Systems Command
6/19/12, 3:27 PM 5945 - MINI-FUSE MODULE
Added: Aug 21, 2009 9:40 am This is a combined synopsis/solicitation for mini-fuse modules. The solicitation which includes the drawings is attached to this posting and can be opened, downloaded and printed. Offerors are required to submit product for technical evaluation of form, fit and function by closing date and time of the solicitation. EP2578-09 Department of Justice Bureau of Prisons
8/21/09, 9:40 AM