Steel wire, round, music wire
Added: May 26, 2009 11:13 am The purpose of this Sources Sought/Market Research is to identify potential sources capable of supplying the following: Two Spools or 10 pounds of Steel Wire, round music, cold finish, bright, smooth. Wire must be furnished on 12 inch minimum diameter spools or wire will not be accepted. Spool to hold approximately 5 pounds or approximately 2235 feet. .029 diameter, holding size to within drawing tolerance of .0295 +/- .0005 inch, ASTM A228. Please respond no later than 5/29/2009 to bette.dennison@us.army.mil.This is a market survey for planning purposes only and shall not be construed as a Request for Quote or as an obligation on the part of the Government. The Government does not intend to award a purchase order on the basis of this market survey or otherwise pay for information solicited. Rock Island Arsenal will only utilize the information you provide in developing its acquisition approach for future requirements.
W9098S-09-T-BD41 Department of the Army Materiel Command Contracting Command Rock Island Arsenal
5/26/09, 11:13 AM AM2 Matting Extrusions
Added: Oct 27, 2010 8:04 am This is a request for information (RFI). This is not a solicitation. This RFI is being conducted for information and planning purposes only. This RFI does not constitute a Request for Proposal and should not be construed as a commitment by the Government to award a contract as a result of this RFI. The Naval Air Warfare Center Aircraft Division Lakehurst is seeking sources of an AM2 Matting extrusion in accordance with Drawing #513273 rev F.The aforementioned drawing packages contain Export Controlled Data and are subject to the Arms Export Control Act (Title 22, U.S.C SEC 2751). Contractors must be certified by the Defense Logistics Services Center and have a current DD2345 on file. To request a copy of Drawing #513273, please contact Mrs. Cistine Sager at cistine.sager@navy.mil. Please include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement, with your request. For DD2345 information call DLIS in Battle Creek, MI at 800-352-3572 or visit the Internet at http://www.dlis.dla.mil/jcp.The Expeditionary Airfield (EAF) Concept is a shore based, aviation weapons support system which permits deployment of landing force aircraft within effective range of ground forces. This concept allows for the construction of portable, reusable, forward-deployed airfields which can be assembled in a building block concept for the rapid introduction of air power. These airfields are fabricated from aluminum panels, designated AM2 Mat. The AM2 Mat expanses can be assembled to form an airfield's runways, taxiways, parking areas, and other areas required for aircraft operations and maintenance.Extrusion size shall be 2 ft. X 12 ft. Material shall be in accordance with ASTM-B-221, 6061, Temper T6. Federal STD No. 245 extrusion tolerances apply. Dimensioning and tolerances are in accordance with ANSI Y14.5.Respondents to this RFI are requested to address the following information in their response to the Government:• A Rough Order of Magnitude (ROM) quotation per extrusion (2ft X 12ft)• Business size (8a, small, women owned, etc.)• Corporate capability and experience• Technical capability• Quality Assurance certifications• Production capability including facilitiesResponses should cite RFI number N68335-11-RFI-7115B and be addressed to the attention of Mrs. Cistine Sager, Code 2.5.2.5.2CS. All responses are due by 30 November 2010.Respondents are notified that a formal solicitation MAY NOT necessarily result from this RFI. The Government will not pay for any information received in response to this request, nor will the government compensate any respondent for any costs incurred in developing the information provided to the Government. The Government will not release any information marked with a Proprietary legend, received in response to this RFI, to any firms, agencies, or individuals outside of the Government without written permission in accordance with the legend.
N68335-11-RFI-7115B Department of the Navy Naval Air Systems Command Naval Air Warfare Center
10/27/10, 8:04 AM 2008 Hill AFB Requirements Symposium
Added: January 10, 2008 The Utah Air Force Association Industrial Associates, in conjunction with Hill Air Force Base, would like to invite you to attend the 2008 Hill Air Force Base Requirements Symposium. The Requirements Symposium is a biennial conference focused on providing valuable insight to industry concerning upcoming requirements and acquisitions at Hill AFB. This year's conference will be held at the Davis Conference Center in Layton, Utah on March 18-19, 2008. All interested contractors are welcome and encouraged to attend this great event. Some of the topics to be covered are listed in the preliminary schedule below (follow the link). Additionally, please reply to requirements.symposium@hill.af.mil with the topics your organization would be most interested in as well as any other special interest topics you would like us to consider. For additional event, lodging, and registration information, please see the following link (please note that you may need to copy and paste the link into your web browsers address bar): http://www.utahafa.org/2008%20Req%20Symp/2008%20HAFB%20Req%20Symp.html The above link will be updated often as finalized schedules and additional details become available, so please check back frequently. Respectfully, Hill AFB Requirements Symposium Committee
Reference-Number-USAF-SNOTE-080318-28 Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base
1/10/08, 12:00 AM Stray Magnetic Field Analysis for Industrial Building #3
Added: Mar 19, 2010 3:38 pm Fermilab is in need of a two part, stray magnetic field analysis:1) Analysis and modeling of the vertical stray field due to the magnetic field produced by a 16T 200mm aperture magnet to be installed in the industrial building #3 (IB3) at Fermilab.2) Analysis of wall shielding on the first floor of industrial building #3 (IB3) to limit fringe fields in the lateral direction outside the building, this will require a tee dimensional, nonlinear modeling effort. The vendor must have experience in magnetic shielding. If you have the capability and experience for this analysis, please contact Steve Gaugel no later than 3/29/2010 at 5pm Central to convey your interest.
216171-SGG Department of Energy Fermi National Accelerator Laboratory
3/19/10, 3:38 PM Congressional Quarterly Inc.
Added: Mar 18, 2009 4:05 pm This is a notice of intent for a Sole Source procurement under the Simplified Acquisition Procedures and other than Full and Open Competition (FAR 6.302-1). A solicitation will not be issued. The associated NAICS Code is 311112. The Regional Contracting Office Northeast, Quantico, Virginia 22134, intends to award a Sole Source, six month contract to Congressional Quarterly Incorporated, 1255 22nd Street, NW, 7th Floor, Washington, DC 20037, for a requirement to administer communications training to potential Marine Corps recruiters. Congressional Quarterly Incorporated, is the only source that will satisfy the agency requirements to equip Marine Corps Recruiting candidates with the requisite skills and abilities to communicate, both verbally and non-verbally, in non-military civilian settings. This Note of Intent is not a request for competitive quotes; however, any firm that believes it can meet this requirement may give written notification to the Contractin! g Officer. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. The Point of Contact for this requirement is Tangela Taylor at tangela.taylor@usmc.mil.
M0026409C0014 United States Marine Corps
3/18/09, 4:05 PM