IDIQ Contract for A-E Services for Preparation of Navy and USMC Planning Engineering Services for Work Predominately Located in CONUS (West Coast, Mid-West State and Alaska) may include some Worldwide
Added: Nov 20, 2015 1:07 pm N62470-16-R-6002 INDEFINITE DELIVERY/INDEFINITE QUANTITY CONTRACT FOR ARCHITECT-ENGINEER SERVICES FOR Preparation of Navy and Marine Corps Planning and Engineering Services for Work Predominantly Located in CONUS (West Coast, Mid-West States and Alaska); may include work Worldwide. Description: ALL INFORMATION NEEDED FOR INTERESTED PARTIES TO SUBMIT A STANDARD FORM SF 330, ARCHITECT ENGINEER QUALIFICATIONS IS CONTAINED HEREIN. THERE IS NO SEPARATE REQUEST FOR PROPOSALS (RFP) PACKAGE TO DOWNLOAD. This UNRESTRICTED procurement is for an Indefinite Delivery/Indefinite Quantity (IDIQ) contract for Architect-Engineering (A and E) Services for preparation of Navy and Marine Corps Planning and Engineering Services projects. The geographic area covered by this contract primarily encompasses locations in CONUS (West Coast, Mid-West States and Alaska); however, tasks associated with this contract may include work Worldwide. This solicitation will be procured in accordance with the Selection of Architects and Engineers Statute (formerly known as the Brooks Act), 40 USC Section 1101 et seq., as implemented by FAR Subpart 36.6. The IDIQ contract will be for a base period of one year and four one-year option periods (if exercised). The total fee for the contract term shall not exceed $30,000,000. The guaranteed minimum for the contract term (including option years) is $5,000 and will be satisfied by the award of the initial task order. The Government makes no representation as to the number of task orders or the actual amount of work to be ordered. Contractors are not guaranteed work in excess of the minimum guarantee. The options may be exercised within the time frame specified in the resultant contract at the sole discretion of the Government subject to work load and/or satisfactory AE performance under the subject contract. Firm-fixed price task orders will be negotiated for this contract. There will be no dollar limit per task order and no dollar limit per year up to a maximum of $30,000,000 for the entire contract term. Estimated start date is (August, 2016). This proposed contract is being solicited on an UNRESTRICTED basis; therefore, replies to this notice are requested from all business concerns. The Small Business size standard classification is North American Industrial Classification System (NAICS) 541330 (Engineering Services) ($15,000,000). The Government seeks the most highly qualified firm to perform the required services, based on the demonstrated competence and qualifications, in accordance with the evaluation criteria. The type of primary tasks expected to be performed under this contract are: (a) PLANS: Global Shore Infrastructure Plans (GSIPs), Installation Development Plans, Regional Integration Plans (RIPs); Functional Plans; Maintenance and Sustainment Plans; Integrated Product Support plans; Encroachment Action Plans (EAPs); Family Housing and Bachelor Quarters Comprehensive Neighborhood Plans (CNPs); Activity Overview Plans; Installation Appearance Plans (IAPs) (formally Base Exterior Architecture Plans (BEAPs)). (b) PROJECT PLANNING DOCUMENTS: The preparation of Military Construction (MILCON) Project Planning Documentation (DD Form 1391 project planning documentation. Preparation of: Construction Cost Estimates, Preliminary and Parametric Cost Estimates; Siting-Land Use Studies/Analyses; Special Site Approvals (EMR, Ordnance etc.); Economic Analyses (EAs) using the latest version of the Government’s ECONPACK software; Asset Evaluations (AE); Basic Facilities Requirements (BFR) Documentation; Facilities Planning Documents (FPD) using the Government’s web-based iNFADS program; Preliminary Hazard Analyses (PHA); Preliminary Hazard Lists (PHL), Sustainable Design Studies based on US Green Building Council Leadership in Energy and Environmental Design (LEED) concepts and scoring procedures. (c) STUDIES: Concept Studies; Special Planning Studies; Business case analysis studies, Traffic/Parking/Movement (Pedestrian and Vehicular) Studies; Facilities Planning studies such as space management and facility utilization, Anti-Terrorism (AT); Sustainable Planning studies; Feasibility Studies, Safety Studies, Air Installation Compatible Use Zones (AICUZ) studies; Range Air Installation Compatible Use Zones (RAICUZ) studies; site studies; facilities life cycle studies; Activity Planning and Management Models (APMMs), electronic Land Use/Planning tools /studies. The type of secondary tasks expected to be performed under this contract are: (a) EVENTS: Visioning and Scenario workshops/Planning, Functional Analysis Concept Development (FACD) sessions (design charettes), facilitated charettes. (b) GEO-SPATIAL INFORMATION and SERVICE: The GeoReadiness Center (GRC) is the single, authoritative source and distribution point for all geospatial asset data within the Region. The GRC manages the most current geospatial information for the entire Region and provides access to the comprehensive data set and analysis tools to Regional and DOD decision makers/managers, sponsored contractors, and other sponsored individuals. In all cases where there is a project requirement to import, export, manipulate, analyze edit or otherwise utilize authoritative geospatial information, the A/E shall coordinate closely with the GRC to comply with current data specifications, and the current implementation and interpretation of Navy standards and practices. Geospatial data shall be compliant with the SDSFIE 3x-based Navy Data Model (NDM) and compatible with ESRI ArcGIS software. The government may provide required geospatial data to the A/E as an exported ESRI Personal Geodatabase or via access to a GeoReadiness hosted system such as GRX or M and A. Geospatial data must be exported directly from NAVFACs Citrix Maintenance and Analysis (M and A) environment on a project-by-project (task order) basis, and pursuant to a GRC Data Release Agreement. Access to a GeoReadiness hosted system requires that each user hold a valid Navy-issued CAC. The Contracting Officers Representative (COR) shall serve as the single government point-of-contact for issuance of CACs. All geospatial data deliverables shall comply with the data specifications provided by the GRCs on a project-by-project (task order) basis. (c) Development and update of Navy and Marine Corps facility planning criteria and associated documents (d) Documentation related to the above planning services, including: presentations, briefing materials and reports (e) Minor Design efforts to include: preparation of Request for Proposals (RFPs) to support Design/Build construction contracts SELECTION INTERVIEW: Interviews may be scheduled with firms slated as the most highly qualified. Firms slated for interviews may be asked to clarify information contained in the SF330 submittal. Elaborate presentations are not desired. All contractors are advised that registration in System for Award Management (SAM) Database is required prior to award of a contract. Failure to register in the SAM Database may render your firm ineligible for award. For more information, check the SAM Web site: https://www.sam.gov. In accordance with the FAR 36.601-4(b) the AE firm must be a registered/licensed architectural and/or engineering firm to be eligible for award. Provide proof that firm is permitted by law to practice the professions of architecture or engineering, (i.e., state registration number, or a brief explanation of the firm’s licensing in states that do not register firms, etc.). Failure to submit the required proof could result in a firm’s elimination from consideration. FIRMS WHO ARE OFFERING AS A JOINT VENTURE SHOULD INCLUDE WITH THEIR SUBMISSION A SIGNED COPY OF THE JOINT VENTURE AGREEMENT. FAILURE TO INCLUDE THE JOINT VENTURE AGREEMENT WILL RESULT IN THE FIRM’S ELIMINATION FROM FURTHER EVALUATION. The awarded contract will be subject to specific provisions addressing the avoidance of organizational conflicts of interest, including NFAS 5252.209-9300, Organizational Conflicts of Interest. The prime firm for this contract will be required to perform toughout the contract term. SUBMISSION REQUIREMENTS: Architect-Engineer firms desiring to be considered for this contract must submit a completed SF-330 package. The SF-330 shall be typed, one sided, at least 11 point Times New Roman or larger. Part I shall not exceed 60 single-sided 8.5 by 11 inch pages (the page limit does not include the cover sheets or divider sheets provided that these do not include any information regarding the capability of the company, or any information submitted in response to a question or requirement from the synopsis, ISRs, certificates, PPQs, licenses, or the draft subcontracting plan, as required by the Small Business Subcontracting criterion). Part I pages shall be numbered sequentially. Introductions shall be included in Sections E and F. Please include your DUNS, CAGE, and TIN numbers in Block 30 of the SF-330. Interested firms shall submit 4 hard copies of the SF-330 and 4 CDs to Naval Facilities Engineering Command Atlantic, Code ACQ35, Attn: Rochelle Lee, 6506 Hampton Blvd., Norfolk, VA 23508. Responses are due no later than 21 December 2015 at 2:00 P.M. EST. Late responses will be handled in accordance with FAR 52.215-1. The points of contact are either Rochelle Lee, Contract Specialist, at 757-322-4182 or Peter Sizemore, Contract Specialist, at 757-322-4662. If an SF 254/SF 255 is submitted for this solicitation, it will not be reviewed or considered. As required above, provide verifiable evidence that your firm is permitted by law to practice the professions of architecture or engineering (i.e., state registration number). The organizational chart may be one page single sided 11 by 17 foldout, using 11 point font or larger (font limitations do not apply to graphics, captions or tables). NOTE: If hand-carrying or express mailing proposal, the firm is advised that the Contracting Officer is on a secured base and passes are required to enter the base. Anticipate delays in base access and plan accordingly. Hand-carried proposals must be delivered to the mailroom. Government personnel will not pick up proposals at the gate. It is the contractor’s responsibility to ensure delivery to the location specified. All visitors to Lafayette River Annex (LRA) who do not have a CAC badge or RAPIDGATE badge must have a background check run by the Naval Station Pass and ID office (Security Department at Commander, Naval Region Mid-Atlantic). Special Note: RAPIDGATE badges must be programmed for access to the Naval Support Activity, Hampton Roads in order to gain access to the LRA. Visitors who do not have a CAC or RAPIDGATE badge must complete the attached Visitor Access Pass Request form (Excel spreadsheet). Visitors must complete and forward the form directly to the following personnel in the security department via email: 1. Iris Gholston, 757-322-8116/e-mail: iris.gholston@navy.mil 2. Steven K. Anderson 757-322-8115/e-mail: steven.k.anderson@navy.mil Visitors must complete and provide the attached form to the security department at least 5 working days prior to their scheduled meeting date to allow ample time to process and complete the background check. Commercial couriers such as FEDEX, DHL and UPS follow the same visitor procedures listed above and they are required to have a background check if they do not have a CAC badge or RAPIDGATE badge. Commercial couriers must also have their vehicle inspected at location listed in the attached LRA commercial vehicle inspection procedures prior to accessing the LRA. Firms should check with their intended courier to ensure they have the proper identification credentials to access the LRA. Temporary visitor passes must be picked up by the approved visitor from the Naval Station Pass and ID Office located at the following address prior to visiting NAVFAC Atlantic on LRA: Address: Naval Station Pass and ID Office 9040 Hampton Blvd Norfolk, VA 23505 Telephone Number: 757-322-2975 Hours of Operation: 0600-1700 on Monday tough Friday] Electronic (E-mail, facsimile, etc.) submissions are not authorized. Inquiries concerning this procurement should include solicitation number and title and be forwarded via email Rochelle.lee@navy.mil. THIS IS NOT A REQUEST FOR PROPOSAL. SELECTION CRITERIA: Standard Form 330s will be evaluated to determine the most highly-qualified firm based on criterion responses. Failure to provide requested data or to comply with the instructions in this notice could result in a firm being considered less qualified or eliminated from consideration. The Selection of Architects and Engineers Statute and FAR Part 36.6 selection procedures apply. The AE must demonstrate the team’s qualifications with respect to the published evaluation criteria. Evaluation criteria (1) tough (3) are considered the most important and are equal among themselves; criteria (4) and (5) are of slightly less importance and are equal among themselves; criteria (6) and (7) are of slightly less importance still and are equal among themselves; and criteria (8) is of the least importance and will be used as a tie-breaker among technically equal firms. Specific evaluation criteria include: 1. Specialized Experience 2. Professional Qualifications and Technical Competence 3. Program Management and Capacity 4. Past Performance 5. Quality Control Program 6. Commitment to Small Business 7. Firm Location 8. Volume of Work Criterion 1 —Specialized Experience (SF330, Part I, Section F): Firms will be evaluated on specialized experience and technical competence in performance of services similar to those anticipated under this contract tough evaluation of experience in: 1. Global or Multi-Regional Planning (such as GSIPs, Integrated Products Support Plans, and Functional Plans), o Global or Multi-Regional planning is defined as infrastructure planning that is strategic in nature, crosses regions and performs analysis that provides actionable recommendations, develops courses of action, or prioritizes identified infrastructure capability gaps, that influence decision making across multiple regions. Repetitious planning actions, such as Basic Facility Requirements or Asset evaluations, performed in two or more regions under a single task order in which each planning action is separate, and only affects the individual installation or region where the planning action is proposed, will not qualify as global and multi-regional planning. 2. Regional Planning (such as Regional Integration Plans, ( RIPs)) o Regional Planning is defined as infrastructure planning that is strategic in nature, crosses installations within a single region and performs analysis that leads to actionable recommendations, develops courses of action, or prioritizes identified infrastructure capability gaps that influence decision making across multiple installations across a single region. Repetitious planning actions, such as Basic Facility Requirements or Asset evaluations, performed at two or more installations under a single task order in which each planning action is separate, and only affects the individual installation where the planning action is proposed, will not qualify as regional planning. 3. Installation Planning (such as IDPs, Encroachment Action Plans, Traffic/Parking Movement Studies, and Siting/Land Use Studies), 4. Business Case Analysis Studies, 5. 1391 Project Planning Documentation, 6. Shore Facility Planning System (Asset Evaluations/Basic Facility Requirements/Facility Planning Documents), and, Firms may be considered more favorably by demonstrating the following: 1. Specialized experience within the primary geographic area of this contract, the United States West Coast, Mid-West States and Alaska (the geographic areas within the AORs of Navy Regions Southwest and Northwest) and may be evaluated more favorably commensurate with the extent of their experience in the various locations covered in the primary geographic area. Submission requirements: Provide a maximum of 8 projects completed within the 5 years immediately preceding the date of issuance of this notice that best demonstrate specialized experience of the proposed team in the areas outlined above. Sufficient information to determine the date of completion of the project must be included in the project description or the project will not be considered. If more than the maximum number of projects are submitted, the Government will only evaluate the first 8 projects listed and will not evaluate projects beyond the maximum number specified in the submission requirements. All projects provided in the SF330 must be completed by the office/branch/regional office/individual team member actually proposed to manage and perform work under this contract. Projects not meeting this requirement will be excluded from consideration in the evaluation. To enable verification, firms should include the DUNS number along with each firm name in the SF330 Part 1, Section F, block 25, “Firm Name.” Include a contract number or project identification number in block 21. Include an e-mail address and phone number for the point of contact in block 23(c). In block 24, include in the project description the contract period of performance, award contract value, current contract value, and a summary of the work performed that demonstrates relevance to specialized experience as outlined above. If the contractor served as a subcontractor on a project, indicate the value of the work that firm provided towards the performance of the overall project. If a project was performed by a joint venture, and not all joint venture partners are on the team proposed for this contract, the firm/team should specifically address the work performed by the joint venture partner offering/teaming on this contract. Likewise, if the firm/team member worked as a subcontractor on a project, the description should clearly describe the work actually performed by the firm/team member proposed for this contract and the roles and responsibilities of each on the project, rather than the work performed on the project as a whole. If the project description does not clearly delineate the work performed by the entity/entities offering/teaming on this contract, the project could be eliminated from consideration. NOTE: If the firm is a joint venture, projects performed by the joint venture should be submitted; however, if there are no projects performed by the joint venture, a project must be submitted for each joint venture partner, not to exceed a total of 8 projects. Firms failing to provide at least one project from each joint venture partner will be considered to have not met the requirements of the criterion. Projects shall be submitted on the SF-330 at Part I, Section F and shall be completed projects. Projects not completed will be excluded from evaluation consideration. For submittal purposes, a single task order on an IDIQ contract is considered a project, as is a stand-alone contract award. Do not submit an IDIQ contract as an example project. Instead, list relevant task orders or stand-alone contract awards that fit within the definition above. The Government will not evaluate information provided for an IDIQ contract. Examples of project work submitted that do not conform to this requirement will not be evaluated. Failure to provide requested data, accessible points of contact, or valid phone numbers may result in a firm being excluded from evaluation or considered less qualified. All information for Criterion 1 should be submitted in the SF330, Part I, Section F of the. The Government WILL NOT consider information submitted in addition to Part 1, Section F in evaluation of Criterion 1. Criterion 2—Professional Qualifications and Technical Competence (SF330, Part I, Sections E and G): Firms will be evaluated on professional qualifications, competence, and experience of the proposed key personnel in providing services to accomplish the tasks required under this contract, including active registration as a professional engineer, registered architect, or certified planner and/or certification of staff in appropriate supporting disciplines such as, but not limited to, cost estimating, economics and GIS, and participation in example projects in the SF330, Part 1, Section G. Key personnel are individuals who will have major contract or project management responsibilities and/or will provide unusual or unique expertise. Failure to provide a balanced workforce in the disciplines required to satisfy the requirements of the scope listed above will result in the firm being considered not qualified. Specific disciplines that must be included in key personnel are quality control; task order managers, project managers; interdisciplinary facility planners; engineers; program managers; cost estimators; and economist. Professional qualifications and competence will be evaluated on the following: (a) For the document and service areas outlined in Criteria 1, demonstrate experience in the following: 1) Technical disciplines (such as planning, engineering, cost estimating, etc.) 2) Project Management including work plans and oversight 3) Preparing studies and analysis (b) Expertise and demonstrated experience (all contracts including federal and DoD contracts) in 1) Program and task order level management and administration 2) Quality control management and administration Submission Requirements: SF330, Part I, Section E. Provide resumes for all proposed key personnel that illustrate experience in the work proposed under this contract. Resumes are limited to one page each and should indicate: professional registration, certification, licensure and/or accreditation in appropriate disciplines; cite recent (within the past 5 years) project-specific experience in work relevant to the services required under this contract; and indicate proposed role in this contract. Indicate participation of key personnel in example projects in the SF330, Part 1, Section G. Criterion 3—Program Management and Capacity (SF330, Part I, Section H): Firms will be evaluated on the firm’s ability to plan for and manage work under the contract and the capacity to accomplish the work in the required time. Submission Requirements: 1. Provide an organizational chart for the team and discuss the management plan for this contract and personnel roles in the organization. Describe the ability of the firm to manage, coordinate and work effectively with team members, both internal staff and consultants. Discuss the history of working relationships with team members, including joint venture partners where applicable. Teams with a demonstrated history of working together may be considered more favorably 2. Describe the firm’s present workload and the availability of the project team (including consultants) for the specified contract performance period. Describe the workload/availability of the key personnel during the anticipated contract performance period and the ability of the firm to provide qualified backup staffing for key personnel to ensure continuity of services. General statements of availability/capacity may be considered less favorably. Criterion 4—Past Performance (SF330, Part I, Section H): Firms will be evaluated on past performance with Government agencies and private industry in terms of work quality, compliance with schedules, cost control, and stakeholder/customer satisfaction. Evaluating past performance and experience will include information provided in Past Performance Questionnaires (PPQs) or CPARS/ACASS for Criterion 1 projects and may include customer inquiries, Government databases, and other information available to the Government including contacts with points of contact in other criteria. Failure to provide requested data, accessible points of contact, or valid phone numbers could result in a firm being considered less qualified. NOTE: Past performance information for projects listed under Criterion 1 may be given greater weight. Submission Requirements: SUBMIT A COMPLETED CPARS/ACASS EVALUATION FOR EACH PROJECT UNDER CRITERION 1. IF A COMPLETED CPARS/ACASS EVALUATION IS NOT AVAILABLE, the Past Performance Questionnaire (PPQ) (Attachment (A)) included in this notice is provided for the firm or its team members to submit to the client for each project the firm includes under Criterion 1, Specialized Experience. A FIRM SHALL NOT SUBMIT A PPQ WHEN A COMPLETED CPARS/ACASS IS AVAILABLE. IF A CPARS/ACASS EVALUATION IS NOT AVAILABLE, ensure correct phone numbers and email addresses are provided for the client point of contact. Completed PPQs should be submitted with your SF330. If the firm is unable to obtain a completed PPQ from a client for a project(s) before the response date set forth in this notice, firms should complete and submit with their responses the first page of the PPQ (Attachment (A)), which will provide contract and client information for the respective project(s). Firms may submit a PPQ previously submitted under a different Notice/RFP (legible copies are acceptable) as long as it is on the same form as posted with this Synopsis. Firms should follow up with clients/references to ensure timely submittal of questionnaires. If requested by the client, questionnaires may be submitted directly to the Governments point of contact, Naval Facilities Engineering Command Atlantic, Code ACQ35, Attn: Rochelle Lee via email at rochelle.lee@navy.mil, prior to the response date. Firms shall not incorporate by reference into their response PPQs or CPARS previously submitted in response to other A/E services procurements. However, this does not preclude the Government from utilizing previously submitted PPQ information in the past performance evaluation. Firms may provide any information on problems encountered and the corrective actions taken on projects submitted under Criterion 1 Specialized Experience. Firms may also address any adverse past performance issues. Information shall not exceed two double-sided pages (or four single-sided pages) in total. Awards, letters of commendation, certificates of appreciation, etc. shall not be submitted and will not be considered in the evaluation. Criterion 5—Quality Control Program (SF330, Part I, Section H): Firms will be evaluated on the strength of the quality control program proposed by the firm to ensure quality products and services under this contract and means of ensuring quality services from their consultants/subcontractors. Submission Requirements: Describe the quality control program that will be utilized for all deliverables of this contract and the management approach for quality control processes and procedures. The description shall: 1. Explain the quality control program including an example of how the plan has worked for one of the projects submitted as part of SF330, Section F or how the plan will work if it has not been used previously. Additionally, discuss any lessons learned that have led to the proposed plan. 2. Provide a quality control process chart showing the inter-relationship of the management and team components. 3. Describe specific quality control processes and procedures proposed for this contract to include processes for shore infrastructure plans (global, regional, and installation specific); business case analyses; DD1391 project documentation; and Shore Facility Planning System products. 4. Identify the quality control manager and any other key personnel responsible for the quality control program and a description of their roles and responsibilities. 5. Describe how the firm’s quality control program extends to management of subcontractors. Criterion 6—Commitment to Small Business (SF330, Part I, Section H): Firms will be evaluated in terms of their extent to identify and commit to Small Business (SB), Small Disadvantaged Business (SDB), Historically Underutilized Business Zone Small Business HubzoneSB, Women-Owned Small Business (WOSB), Small disadvantage Veterans Owned Small Business SDVOSB, and Veterans Owed Small Business VOSB in performance of this contract, whether as a joint venture, teaming arrangement, or subcontractor. The Government will evaluate proposals based on: (A) Past performance in utilization of small business concerns, and (B) Participation of small business concerns for this requirement. Submission Requirements: In support of (A), all firms shall provide historical data on utilization of SB, SDB, HUBZoneSB, WOSB, SDVOSB, and VOSB. Large Businesses shall submit tee “final” or “most recent” Individual Subcontracting Reports (ISRs) for similar contracts of relative size which show compliance with utilizing the various types of small business firms noted above. If ISRs are not FINAL or MOST RECENT they will not be considered. If subcontracting goals were not met, provide an explanation. If Individual Subcontracting Reports were not applicable to the similar contracts noted, large businesses shall submit other documentation which shows their utilization of the various types of small business firms for the contracts. Small Businesses shall also submit documentation which shows their utilization of the various types of small business firms for similar contracts of relative size. In support of (B), large businesses shall submit a draft Small Business Subcontracting Plan, in which they will be evaluated on the extent to which they identify and commit to the published Small Business Subcontracting Program. The Secretary of the Navy has assigned the Naval Facilities Engineering Command goals for FY2015 in terms of percentages of total planned subcontracting dollars for utilization of small businesses. Demonstrate the plan to meet these goals: FY2016 – FY2020 SB 65% HubZone 6% SDB 15% WOSB 15% SDVOSB 5% VOSB 5% If a large business firm is selected for award, a Small Business Subcontracting Plan, in accordance with FAR 19.7 and DFAR 219.7, will be required and incorporated into the contract award. A draft Small Business Subcontracting Plan is not required from small businesses; however, small businesses shall submit similar information on the extent to which they identify and commit to subcontracting to large business (LB), SB, SDB, WOSB, HUBZoneSB, VOSB, SDVOSB, and HBCU/MI if applicable in the performance of this contract. The Small Business size standard classification is NAICS 541310, Architectural and Engineering Services, size standard $15,000,000. The attached Small Business Subcontracting Plan template (Attachment (B)) shall be used by large businesses to complete the draft subcontracting plan. Firms shall submit their “draft” Small Business Subcontracting Plans utilizing this template, and ONLY this template. Criterion 7—Firm Location (SF330, Part I, Section H) Provided that the application of this criterion leaves an appropriate number of qualified firms, given the nature and size of the contract, firms will be evaluated on the locations of their office or offices that will be performing the work under this contract and demonstrated knowledge of the general geographic areas in which projects could be located. Evaluation of firms will include consideration of their location within the general geographic area of the anticipated projects, primarily Mid-West States and Alaska (the geographic areas within the AORs of Navy Regions Southwest and Northwest). Submission Requirements: 1. Indicate location of the office(s) that will be performing the work, including main offices, branch offices, and offices of team members. 2. Provide a narrative describing the team’s knowledge of the primary geographic areas to be covered by this contract. Criterion 8—Volume of Work (SF330, Part 1, Section H) CRITERION 8 CAN BE FOUND ON THE ATTACHED SYNOPSIS
N6247016R6002 Department of the Navy Naval Facilities Engineering Command
11/20/15, 1:07 PM