Project Grant DESC0025160
Award Date 7/22/24
Completion Date 7/21/25
Dollars Obligated $200K
Federal Agency
Federal Grant Program
Assistance Type
Project Grant
Place of Performance
Boulder, CO 80303, USA
Similar Awards
- This Project Grant award from the Department of Energy (DOE) Office of Science under the DOE Office of Science Financial Assistance Program (CFDA 81.049) provides $200,000 to Rcam Technologies Inc. (Rcam) to develop industrialized gravity anchors for floating photovoltaics. Rcam, a for-profit cleantech/deeptech company, will leverage its expertise in 3D concrete printing to optimize anchor designs, fabricate prototypes, conduct structural testing, and develop manufacturing models. The goal is to...
- The Department of Energy (DOE) Office of Science awarded a $200,000 Project Grant under the Office of Science Financial Assistance Program (CFDA 81.049) to RCAM Technologies Inc. The grant supports the company's research, development, and validation of innovative 3D concrete printing techniques to fabricate low-cost, environmentally friendly concrete torpedo anchors for floating offshore wind turbines. Key activities include optimizing anchor designs, fabricating prototypes, conducting...
- Rcam Technologies Inc. received a $256,000 Small Business Technology Transfer (STTR) Phase I Project Grant award from the National Science Foundation on June 15, 2021 to support preliminary design and manufacturing of mooring line connections for 3D concrete printed floating wind turbine anchors. The award is being carried out under the Engineering (47.041) federal grant program, which aims to foster innovation and excellence in engineering research. The funding will allow Rcam Technologies to...
- This National Science Foundation (NSF) Cooperative Agreement award, funded under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program, provides $999,496 to Rcam Technologies Inc. to advance the development of a 3D printed concrete anchor for floating offshore wind turbines. The key objectives are to: 1) Develop optimized anchor designs and mooring line connections manufactured using 3D concrete printing, 2) Fabricate and validate anchor prototypes through structural testing and...
- Rcam Technologies Inc. received a $200,000 Project Grant award from the Department of Energy Office of Science on June 27, 2022 to develop a low cost, 3D concrete printed, modular, marine pumped hydroelectric storage system. The award is being carried out in San Antonio, TX under the Office of Science Financial Assistance Program (CFDA #81.049), which supports basic research to transform understanding of nature and advance U.S. energy security and economic competitiveness. Specifically, the...
- The federal Project Grant award, DESC0023889, was issued by the U.S. Department of Energy's Office of Science (under CFDA 81.049 Office of Science Financial Assistance Program) to Triton Anchor LLC, a self-certified small disadvantaged business, in the amount of $206,400 on July 10, 2023. The funding will support the development of an "Innovative Keel-Plate Quick Connector for Floating Platform Mooring and Cables". This project aims to advance the design and implementation of a...
- This Cooperative Agreement award of $999,323 from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (CFDA 81.087 - Renewable Energy Research and Development) supports Triton Anchor LLC, a small disadvantaged business, in developing a cost-effective, modular anchoring system for offshore renewable energy platforms. The Triton Anchor is designed to utilize a group of commercial off-the-shelf helical piles within a short caisson to provide high-capacity,...
- The Department of Energy's Office of Science has awarded a $199,979 Project Grant to Ocean Renewable Power Co Inc. in Portland, Maine to develop "Embedded Instrumentation for Detection of Flow Separation." The funding, which runs from July 22, 2024 to July 21, 2025, supports the company's research and development of advanced instrumentation and technologies for detecting flow separation in marine energy systems. This work aligns with the Office of Science Financial Assistance Program...
- The Project Grant award of $1,000,000.00 from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (CFDA 81.087 - Renewable Energy Research and Development) supports the development of a novel "MARINER" fluid kinetic energy conversion device by North Carolina State University. The MARINER system uses a unique principle of dynamically controlling the sizes of two drag bodies in a flow to generate reciprocating motion and produce power, offering a simpler...
- This federal Project Grant award, totaling $320,000.00, was provided by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy under the Renewable Energy Research and Development program (CFDA 81.087). The key objective of this project is to develop a comprehensive, scalable, modular, and self-coordinated power converter framework to advance marine renewable energy (MRE) sources. The project seeks to enhance the performance, reliability, and adaptability of MRE...