Project Grant DESC0018530

The National Science Foundation (NSF) awarded a $274,995 SBIR Phase I project grant under the NSF Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) to Tiptek, LLC, a small for-profit limited liability company. The project aims to improve a critical semiconductor manufacturing method called nanoprobing by enabling the technique to probe smaller and more complex electrical devices for longer periods. The improved nanoprobes developed through this research will support the...

The National Institute of Standards and Technology (NIST) awarded a $289,999.65 Cooperative Agreement under the CHIPS Research and Development (CFDA 11.042) program to Tiptek, LLC, a for-profit limited liability company, to create new gigahertz nanoprobes for semiconductor failure analysis. Through this funding, Tiptek will build ultra-high-speed nanoprobe prototypes capable of operating at gigahertz frequencies to detect "soft" electrical faults that are difficult to identify with...

This Project Grant from the National Science Foundation Division of Civil, Mechanical, and Manufacturing Innovation supports research to advance manufacturing processes for semiconductor electronic and quantum devices at the atomic scale. Funded for $292,392 over two years from January 1, 2023 through December 31, 2024, the award supports the University of Maryland, College Park under the NSF Engineering program (CFDA 47.041). The research aims to develop robust manufacturing techniques with...

This $274,786 Phase I Small Business Innovation Research (SBIR) award from the National Science Foundation's (NSF) Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) will fund the development of a cutting-edge scanning magnetometer microscope by Femtosenselabs, LLC. This new microscope technology will enable high-resolution imaging of novel magnetic materials with unprecedented sensitivity at the nanoscale, supporting the advancement of spintronics and the development of...

The National Science Foundation awarded a $355,714 Project Grant to the University of Rochester under the Engineering (47.041) federal grant program. The grant supports research to develop an innovative, scalable nanomanufacturing platform for area-selective atomic layer deposition of components for ultra-efficient optoelectronic devices. The goal is to pioneer a continuous, energy-efficient manufacturing approach that enables novel three-dimensional chip designs not reliant on unsustainable...

This SBIR Phase I project, awarded by the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084), aims to develop a novel liquid crystal polymer (LCP) called Tullomer to address limitations in fused deposition modeling (FDM) 3D printing. The $275,000 grant, awarded to Z-Polymers, Inc., will fund the optimization of Tullomer's monomer ratios, integration of nucleation additives, and control of mesogenic state formation to enhance...

This SBIR Phase I Project Grant award of $305,000 from the National Science Foundation's (NSF) Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) is advancing semiconductor processing technology. The project aims to develop a novel power generator and applicator system that uses nanosecond-scale high voltage pulses to enhance the quality, reduce processing steps, and lower costs of depositing super-thin coatings for advanced semiconductor manufacturing. The technology,...

This National Science Foundation (NSF) Technology, Innovation, and Partnerships (CFDA 47.084) Project Grant award for $275,000 will support the development of a plasmonic nanopore sensor device for quality control of adeno-associated viruses (AAVs) used in gene therapy. The proposed device will enable accurate characterization of AAV payload (single-stranded DNA, double-stranded DNA, or empty) at low, pre-scale-up concentrations to optimize formulations. The project aims to demonstrate the...

This National Science Foundation (NSF) Technology, Innovation, and Partnerships (CFDA 47.084) Cooperative Agreement award of $1,184,000 to Sangtera Inc. in Lexington, MA aims to develop a small form-factor precision stage to enable high-volume manufacturing of next-generation high-performance computing devices utilizing 3D stacked chiplets. The project focuses on designing, fabricating, and characterizing a prototype precision stage that can achieve 100 nm positioning precision and 1 mm motion...

This Project Grant award from the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) supports the design, optimization, modeling, and initial validation of a high-sensitivity integrated photonic Raman spectrometer by Perceptra Technologies, Inc. The $275,000 award aims to demonstrate the technical feasibility of compact, low-cost optical sensors that can provide on-demand and real-time chemical analysis, addressing the lack of...