Cooperative Agreement 70NANB23H243
Award Date
10/1/23
Completion Date
3/31/24
Dollars Obligated
$100K
Federal Agency
National Institute of Standards and Technology
Awardee
Chem3 LLC (H9P2QGRGMMY6)
Federal Grant Program
11.620
Assistance Type
Cooperative Agreement
Place of Performance
Stony Brook, NY 11794, USA
Similar Awards
This National Science Foundation (NSF) Technology, Innovation, and Partnerships (CFDA 47.084) Project Grant award to Freescale LLC aims to demonstrate the manufacturing of fully printed functional devices using an innovative multifunctional printing platform for next-generation electronics. The $274,972 award, provided from March 2024 to November 2024, will support the development, optimization, and delivery of specialty conductive and semiconductive inks that can be printed on rigid and...
The National Science Foundation (NSF) Division of Electrical, Communications and Cyber Systems awarded a $400,000 Project Grant to The Research Foundation For The State University Of New York to develop an all-paper-based electronic system, named "Integrated Papertronics", that can function in an eco-friendly, cost-effective, and self-sustaining manner. The primary objectives are to: 1) Create a printed circuit board (PCB) with highly conductive metallic wires on paper to enable...
This $257,665 project grant, awarded by the National Science Foundation (NSF) under the Integrative Activities program (CFDA 47.083), aims to establish an innovative electrohydrodynamic (EHD) 3D printing technology for fabricating microscale 3D electronics. The key objectives are: 1) studying the relationship between ink composition and rheological properties, 2) investigating spatial photonic sintering of metallic nanoparticles, and 3) developing the "Intense Pulsed Light Assisted EHD 3D...
This Project Grant from the National Science Foundation's Division of Civil, Mechanical, and Manufacturing Innovation, under the Engineering program (CFDA 47.041), provides $481,998 to support research at the University of California, Berkeley on developing a new additive manufacturing process for multi-material and multi-functional part fabrication. The principal investigator will conduct fundamental research into a charge-programmed additive microfabrication technique to rapidly pattern...
This National Science Foundation (NSF) Engineering program (CFDA 47.041) Project Grant award of $546,713 supports fundamental research to enable scalable manufacturing of high-resolution, liquid metal-based stretchable electronics. The key products and services to be delivered include: Developing a novel approach that combines colloidal self-assembly of liquid metal particles with scalable transfer printing to pattern liquid metals with high resolution and throughput on a variety of...
This National Science Foundation (NSF) Division of Civil, Mechanical, and Manufacturing Innovation (CMMI) project grant, titled "LEAP-HI: ALL-CARBON RECYCLABLE ELECTRONICS (ACRE): REALIZING A SUSTAINABLE ELECTRONICS LIFECYCLE", will investigate the printing of all-carbon recyclable electronic (ACRE) materials to replace silicon- or metal oxide-based semiconductors in display manufacturing. The $500,000 award to Duke University, with a sub-award to Columbia University, aims to develop...
This National Science Foundation (NSF) Engineering program (CFDA 47.041) Project Grant award of $521,832 supports research to develop an "all-on-a-chip" nanomanufacturing system capable of additively printing three-dimensional features at the deep-nanometer scale. The research aims to leverage advancements in electrified droplet ejection and nanofluidics to enable the use of yoctoliter-to-zeptoliter scale droplets for high-resolution, integrated circuit-compatible additive...
This Project Grant award from the National Science Foundation's (NSF) Engineering program (CFDA 47.041) provides $580,623 to support fundamental research into a probe-based hybrid nanopatterning process for conductive polymers. The objective is to create and understand this new process to enable high-resolution and versatile patterning of conductive polymers, which can enhance the performance of nanoelectronics like advanced sensors and energy devices. The 5-year project will: (1) pilot the...
This Project Grant award from the National Science Foundation's (NSF) Integrative Activities program (CFDA 47.083) provides $300,000 to Iowa State University to conduct fundamental research on the development and reliability of additively manufactured electronics for use in extreme environments. The research aims to advance material-process-structure-property relationships for printed electronics based on air-sensitive metals and alloys, such as nickel alloys, to broaden the functionality of...
This $235,000 Project Grant awarded by the National Science Foundation (NSF) Engineering program (CFDA 47.041) supports fundamental research to understand the key mechano-electrical phenomena in a novel manufacturing process called "form-fuse." The form-fuse process creates high-performance conformal electronics that can geometrically conform to rigid 3D surfaces, enabling applications in sectors like automotive, aerospace, robotics, biomedical, energy, and environment. The research...