Remanufacture/Restoration of a 2350 HP Teco-Westinghouse DC Motor for the Helicopter Blade Test Facility, Whirl Tower
Added: Jan 27, 2015 7:03 am THIS IS A SOURCES SOUGHT SYNOPSIS ONLY. This is NOT a request for quotation and in no way obligates the Government to award any contract/purchase order. The purpose of this sources sought synopsis is to perform market research in order to gain knowledge of commercial contractors with the potential to provide a product that meets the following requirements of the Fleet Readiness Center (FRC) East, MCAS Cherry Point, NC: Remanufacture/Restoration of a 2350 HP Teco-Westinghouse DC Motor for the Helicopter Blade Test Facility, Whirl Tower. This project consists of removal, transportation, remanufacture/restoration, and reinstallation of a 2350 HP Teco-Westinghouse DC motor currently installed in the helicopter blade test facility (whirl tower), Fleet Readiness Center East (FRCE), MCAS Cherry Point, NC 28533. The project to remanufacture/restore the 2350 HP DC motor includes the following major tasks: motor removal, transportation between the FRCE and the Contractor's facility, motor remanufacture/restoration, motor reinstallation, and returning the motor to service. Government personnel will have the responsibility to disconnect power and remove all auxiliary equipment and hardware that would interfere with physical removal of the motor, with the exception of the motor foundation bolts. The Contractor shall be responsible for removing the motor foundation bolts and all other aspects of physical removal of the motor, transportation between FRC-E and the Contractor's facility, motor remanufacture/restoration (including parts, labor, and materials), motor placement, reinstallation of the motor foundation bolts, and acceptance testing. The Government will be responsible for reconnecting power and any equipment or hardware required prior to acceptance testing. The Government will be responsible for installing any remaining equipment and hardware required to configure the Whirl Tower for blade testing after completion of acceptance testing. The existing Reliance Electric Co. 12-pulse solid state drive system and the existing armature and field cabling will be reused.Responses to this notice should include company name, address, telephone number, point of contact, and information that supports the capability of your company to provide the required supplies. The applicable NAICS code for this supply item is 336413 with a corresponding small business size standard of 1,000 employees. In addition to the above, please provide the following information: (1) Is your company considered a large or small business under the applicable NAICS code? (2) If small, indicate if your company certified under any of the following SB subcategories: Section 8(a) of the Small Business Act; HUBZone; women-owned; and/or Service-Disabled Veteran-Owned. (3) Are these products/services available under a GSA/FSS contract awarded to your company? If so, please provide contract number. (4) Has your company ever sold these products/services to any government agency? If so, please provide names of agency, POCs and contract numbers.Responses to this sources sought notice shall be e-mailed to: cistine.pistochini@usmc.mil TELEPHONE RESPONSES WILL NOT BE ACCEPTED. Responses must be received at the e-mail address shown above no later than 6 February 2015 at 3:00 PM EST.Primary Point of Contact and Contracting Office Address: Cistine PistochiniContract SpecialistPhone: 252-466-2022e-mail: cistine.pistochini@usmc.mil Secondary Point of Contact: Sherry KellyContracting OfficerPhone: 252-466-2846e-mail: sherry.kelly@usmc.mil Contracting Office Address:Cherry Point Satellite Contracting OfficePSC Box 8018, Cherry Point, NC 28533-0018 M00146-15-T-9015 United States Marine Corps
1/27/15, 7:03 AM Remanufacture/Restore Whirl Tower Motor
Added: Apr 23, 2015 11:05 am 15-9015 Whirl Tower Motor Remanufacture/Restoration SynopsisThe Fleet Readiness Center (FRC) East, MCAS Cherry Point, NC has a requirement for the remanufacture and restoration of the 2350 HP DC motor. The complete Request for Quotation, including a detailed purchase description will be posted at at the Federal Business Opportunities (FBO) web-site on or around 11 May 2015. All responsible sources may submit a quotation, which will be considered. Interested contractors should continue to monitor the FBO web site for additional information and documents relating to this requirement. The North American Industry Classification System (NAICS) code for this requirement is 336413 with a corresponding size standard of 1,000 employees. Contractors interested in doing business with the government must be registered in the System for Award Management (SAM) . Contractors must also ensure annual representations and certifications are current in SAM. Contractors must also be registered in the Wide Area Workflow (WAWF) invoicing system at https://wawf.eb.mil/. Primary point of contact for questions relating to this requirement is Cistine Pistochini, Contract Specialist, phone 252-466-2022 or e-mail cistine.pistochini@usmc.mil. Alternate point of contact is Cistopher Poulos, Contracting Officer, phone 252-466-4038 or e-mail cistopher.poulos@usmc.mil. M00146-15-T-9015 United States Marine Corps
4/23/15, 11:05 AM