Purchase Order FA860110P0160
Award Date 1/29/10
Potential Completion Date 8/1/10
Potential Value $98K
Funding Federal Agency
Contracting Federal Agency
Awardee
Ultimate Awardee
Not listed PSC Category
Set-Aside Type
No Set-Aside Used
Federal Contract Vehicle
- Not listed
Extent Competed
Not Competed
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Walpole, MA 02081, USA
Solicitation Procedures
Only One Source
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- NASA's Shared Services Center awarded a $25,594 firm fixed-price purchase order to Toray Advanced Composites USA, Inc. on September 9, 2025, for the procurement of Toray TC1200/T800 aerospace-grade carbon fiber reinforced thermoplastic prepreg material. The contract, with an ultimate completion date of February 28, 2026, was conducted as a sole-source acquisition under FAR 13.106-1(b)(1)(i) authority using commercial item procedures. The primary deliverable consists of at least 200 pounds of...
- This is a firm-fixed price purchase order contract awarded by the Aeronautical Systems Center, a Defense agency, to Composite Resources, Inc., a small business manufacturer of advanced composite solutions and components. The contract is for the delivery of a REFERENCE STANDARD, CARBON TO ROHACELL CORE with a potential value of $55,371.52. The reference standard is constructed of carbon epoxy material bonded to a Rohacell foam core, with represented disbonds between the skins and core. The...
- NASA Langley Research Center awarded a $525,749 firm fixed price purchase order to COI Ceramics, Inc., a subsidiary of Northrop Grumman Corporation, to deliver 100 kilograms of Hi-Nicalon silicon carbide 1800 denier fiber tow. The fiber tow will be used to support NASA's flexible thermal protection system development efforts for atmospheric entry vehicles as part of the agency's High Density Ablator project. Over the past eight years, NASA has extensively tested Hi-Nicalon fiber and determined...
- The Department of the Army Materiel Command TACOM Life Cycle Management Command awarded a firm fixed-price purchase order to Mitsubishi Chemical Carbon Fiber and Composites, Inc. (MCCFC) for the delivery of 8,500 pounds of fiberglass roving to support production of the 120MM M256 cannon. The $220,660.00 contract has no set-aside designation and a completion date of October 7, 2022. MCCFC, a manufacturer of advanced composite materials, has previously received multiple contracts from this...
- This is a firm fixed-price purchase order contract awarded by the Defense Logistics Agency (DLA) Aviation to Aero Components, LLC, a for-profit limited liability company based in Forest Hill, Texas. The contract, valued at $20,574.00, is for the delivery of a FAIRING,CONE,LIGHT (8510886543) item for the U.S. government. The contract has an ultimate completion date of May 11, 2025. Aero Components, LLC is a small business that specializes in the manufacture of aerospace and aviation components...
- The Defense Logistics Agency Aviation (DLA) awarded a $9,355 firm fixed price purchase order to Military Aircraft Parts for CONE, ANTENNA. As part of DLA's mission to provide logistics support to the Department of Defense, this contract will deliver antenna cones to support the agency's aviation programs. Military Aircraft Parts, operating out of Rancho Cordova, California, will serve as the prime contractor on this award issued through April 2022. No subcontractors or set aside designations...
- Carbon Carbon Advanced Technologies, Inc. (C-Cat), a small business manufacturer of advanced high-temperature composites based in Kennedale, Texas, was awarded a $1.25M Phase II Small Business Innovation Research (SBIR) contract by the Air Force Research Laboratory on September 1, 2023. The contract, designated as a total small business set-aside, focuses on developing carbon-carbon composites enhanced with ceramic matrix materials via reactive melt infiltration technology for scramjet duct...
- This $749,995 firm fixed price purchase order was awarded by the Air Force Materiel Command Research Laboratory to Continuous Composites Inc., located in Coeur d'Alene, Idaho, under its SBIR Phase II program. The small business set-aside contract calls for Continuous Composites to produce a 1:1 scale continuous fiber 3D printed topology optimized wing structure using continuous carbon fiber reinforcement and a photoiniated thermoset resin system. Testing efforts led to the down selection of this...
- The Department of the Army Materiel Command TACOM Life Cycle Management Command awarded a firm fixed price purchase order to Cytec Engineered Materials Inc., a foreign-owned for-profit manufacturer, for the delivery of 5,000 pounds of fiberglass roving. The contract, which does not have a set-aside designation, has a potential value of $219,550.00 and a completion date of April 17, 2019. Cytec Engineered Materials Inc. is a global specialty materials and chemicals company that has provided...
- The Department of the Army Materiel Command TACOM Life Cycle Management Command awarded a firm fixed price purchase order to Mitsubishi Chemical Carbon Fiber and Composites, Inc. (MCCFC) on February 16, 2022. The $160,680.00 contract is for the delivery of 6,500 pounds of fiberglass roving to support the production of 120MM M256 cannons. This purchase order, which has no set-aside designation, is one of several contracts MCCFC has received from this agency over the past four years, valued from...
CARBON FIBER CONES
Posted 1/29/10
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| P00001 | Other Administrative Action | $0 | 2/23/18 | |
| Not listed | Not listed | $98.5k | 1/29/10 |