Purchase Order 80NSSC26P0337
Award Date 3/17/26
Potential Completion Date 7/7/26
Potential Value $160K
Federal Agency
Ultimate Awardee
Not listed NAICS Category
PSC Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Latrobe, PA 15650, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- NASA's Shared Services Center awarded a $124.7K firm fixed-price purchase order to Product Evaluation Systems, LLC of Latrobe, Pennsylvania on August 27, 2025, for elevated temperature oxide dispersion strengthened alloy fatigue and tensile testing services. The contract, which carries no set-aside designation, is scheduled for completion by May 27, 2026. Product Evaluation Systems was selected as the sole source provider based on NASA's determination that the company uniquely possesses the...
- This is a firm fixed-price purchase order awarded by NASA's National Shared Services Center (NSSC) to Product Evaluation Systems, LLC, a for-profit limited liability company located in Latrobe, Pennsylvania. The $70,830 contract is for cryogenic and elevated temperature mechanical testing of NASA-alloy and oxide dispersion strengthened (ODS) alloy materials. The award stems from a sole source Special Notice issued by the NSSC, which determined that Product Evaluation Systems, LLC is the sole...
- This is a $96,651 firm fixed-price purchase order awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Laboratory Testing Inc., a for-profit Subchapter S Corporation based in Hatfield, Pennsylvania. The contract is for room and high temperature high cycle fatigue testing of NASA-developed alloys, to be performed at the NASA Marshall Space Flight Center. This is a sole-source award made under the authority of FAR 13.106-1(b)(1)(i), as NASA has determined...
- This is a $139,968.00 firm fixed price purchase order awarded by the Shared Services Center, a civilian federal agency, to Product Evaluation Systems, LLC, a for-profit limited liability company. The contract is for NI-CO-CR-BASED ALLOY HIGH TEMPERATURE MECHANICAL TESTING and has an ultimate completion date of December 5, 2024. There is no set-aside designation for this contract. Based on the information provided, Product Evaluation Systems, LLC has prior experience as a subcontractor...
- NASA's Shared Services Center has awarded a $31,350 firm fixed-price purchase order to Touchstone Testing Laboratory LLC for microtensile and elevated temperature testing of GRX-810 materials in support of NASA Marshall Space Flight Center. The contract, awarded December 9, 2024, with completion targeted for April 30, 2025, was procured through a sole-source Special Notice determination, with no set-aside designation applied. Touchstone Testing Laboratory, based in Scott Depot, West Virginia,...
- The National Aeronautics and Space Administration (NASA) Shared Services Center awarded a $39,583.75 firm fixed price purchase order to Metcut Research Associates Inc., a for-profit subchapter S corporation, to perform tensile and creep testing on superalloy specimens. The contract, which does not have a set-aside designation, requires Metcut to conduct 80 total tests across various temperature ranges per ASTM standards E21 and E139. This contract award is likely part of a broader NASA program...
- NASA awarded a $384,048 purchase order to Zwickroell, LP for a high temperature air tension tester to be delivered to NASA's Glenn Research Center in Cleveland, Ohio. The contract, awarded on September 1, 2026, reflects NASA's ongoing need for specialized materials testing equipment to support aerospace research and development initiatives. As a precision materials testing equipment supplier based in Kennesaw, Georgia, Zwickroell has demonstrated extensive experience delivering sophisticated...
- This firm-fixed-price purchase order, awarded to MRL Materials Resources LLC (MRL), a small business, requires the additively manufacture of test specimens from a specialized superalloy powder provided by the National Aeronautics and Space Administration (NASA). The contract, valued at $26,000.00, has a period of performance ending on September 29, 2025. The original solicitation was a special notice published by NASA, seeking a vendor to develop suitable process conditions and print various...
- NASA's Shared Services Center awarded a $22,970 firm fixed-price purchase order to Additive Manufacturing & Engineering, Inc. (AME), a HUBZone-certified small business based in Huntsville, Alabama, for the production of additively manufactured GRCOP-42 very high cycle fatigue test bars. The contract, awarded on March 19, 2026, with an ultimate completion date of April 30, 2026, represents a continuation of AME's specialized work supporting NASA's propulsion research initiatives. This...
- NASA's Shared Services Center awarded a $142.6K firm fixed-price purchase order to North American Manufacturing Pros LLC, an Ardmore, Alabama-based small disadvantaged business, for a six-month rental of an EOS M280 laser powder bed fusion machine to support the GRX-810 oxidation-dispersed strengthened alloy reuse study. The contract, awarded January 13, 2026, with an ultimate completion date of September 2, 2026, was issued as a sole source procurement under FAR Parts 12 and 13 (commercial...