Purchase Order 80NSSC26P0227
- Not listed
- The University of Toledo has been awarded a $58,000 firm fixed price purchase order by NASA's Shared Services Center to conduct a 12-month laboratory study on laser powder bed fusion additive manufacturing materials. The contract, designated as "L-PBF GRX-810 Heat Treatment and Temperature Impact on Very High Cycle Fatigue Study," will support NASA Marshall Space Flight Center's critical requirements for the Space Launch System and commercial space missions. The work involves...
- This federal contract award, valued at $43,505.00, was issued by the Shared Services Center, a civilian agency, to the University of Toledo. The contract is a Cooperative Agreement with a period of performance through August 16, 2026. The contract is focused on "ADVANCED UNDERSTANDING OF FATIGUE FAILURE AND LOCAL--BULK MECHANICAL PROPERTIES OF LASER POWDER DIRECTED ENERGY DEPOSITION GRCOP-42 DEPOSITED USING INFRA-RED LIGHT AND GREEN LASERS SOURCES." The University of Toledo, a public...
- This is a federal Cooperative Agreement valued at $639,957.00 awarded by the National Aeronautics and Space Administration's (NASA) Glenn Research Center to the University of Toledo. The contract is for elevated temperature testing and modeling of advanced structural ceramics, which supports NASA's research and development efforts in materials science. The University of Toledo, a public research university, is the prime contractor and has not received any set-aside designation for this award....
- This federal contract award for $507,475.00 is a Cooperative Agreement between the University of Toledo and the National Aeronautics and Space Administration's (NASA) Glenn Research Center. The contract is for "MICROSTRUCTURAL ANALYSIS OF ADVANCED TURBINE MATER IALS" and has a period of performance through November 30, 2005. The University of Toledo, a public research university, is the prime contractor and there are no set-aside designations for this award. This contract supports...
- The University of Toledo was awarded a $14,997,548 definitive cost-no-fee contract by the Air Force Research Laboratory to develop new materials for space power systems under the "NEW MATERIALS FOR SPACE POWER (NM4SP)" program. This contract supports research and development work in materials science and engineering with an ultimate completion date of October 31, 2029. The University of Toledo is a public research university that frequently receives federal contracts and grants to...
- This federal contract award, with ID 80NSSC25K7945, was granted by the Shared Services Center of the National Aeronautics and Space Administration (NASA) to the University of Toledo, a public research university located in Toledo, Ohio. The contract, valued at $39,996.00, is a grant for research to refine the galactic dust and metals (heavy elements) cases during Phase A of the PRIMA mission, ensuring that the science case meets the Level 1 requirements. The contract has no set-aside designation...
- The University of Toledo has been awarded a $358,446 grant by the National Aeronautics and Space Administration (NASA) Office of STEM Engagement, with an ultimate completion date of August 10, 2028. This non-set-aside grant supports NASA's mission to attract students to science, technology, engineering, and mathematics (STEM) through unique learning opportunities that connect educational experiences to NASA's work and mission objectives. The contract type is classified as a Grant For Research,...
- This federal contract award to the University of Toledo, a public research university in Ohio, is for an AEROELASTIC ANALYSIS OF TURBINE ROTOR IN A CONSTANT VOLUME COMBINED CYCLE ENGINE (CVCCE). The $213,500.00 cooperative agreement was issued by the National Aeronautics and Space Administration (NASA) Glenn Research Center, a civilian agency, on January 14, 2004, with a completion date of February 28, 2006. The contract does not have a set-aside designation. As a prime contractor, the...
- The National Aeronautics and Space Administration (NASA) awarded a $137,795 firm fixed price purchase order to The Ohio State University to provide material testing services under a special notice for Tailored Universal Feedstock for Forming (TuFF). As the prime contractor, The Ohio State University will leverage its expertise conducting research and development for NASA to support testing of advanced manufacturing techniques and materials. No set-aside designation was applied to this award...
- The University of Toledo was awarded a $625,506 cooperative agreement from the U.S. government to conduct technology validation and risk reduction research for flywheel technology. The contract, which does not have a set-aside designation, has an ultimate completion date of October 31, 2005. The University of Toledo is a public research university that frequently partners with federal agencies like the National Aeronautics and Space Administration (NASA), National Oceanic and Atmospheric...
The University of Toledo has been awarded a $349,814 firm fixed-price purchase order by NASA's Shared Services Center to conduct very high cycle fatigue and supplementary high cycle fatigue testing of additive alloys. The contract, awarded on February 16, 2026, with performance through February 15, 2029, supports NASA's materials research objectives through comprehensive testing of additively manufactured specimens. The work involves receiving, inspecting, machining, and testing 354 total specimens—270 ultrasonic fatigue specimens and 84 high cycle fatigue specimens—with testing conducted at elevated temperatures up to 1000 degrees Celsius on NASA oxide dispersion strengthened alloys. The contract was awarded without a set-aside designation and follows a Special Notice procurement process in which NASA initially indicated its intent to sole-source the contract to the University of Toledo. Deliverables under this purchase order include a final test report formatted as a journal article, data summaries in multiple digital formats, fractographic characterization and analysis, and the return of all tested samples to NASA's Marshall Space Flight Center in Huntsville, Alabama. The University of Toledo, a public research institution with extensive experience conducting sophisticated research and development work for federal agencies including NASA, the Department of Defense, and the National Science Foundation, is well-positioned to execute this materials science and advanced manufacturing project that advances NASA's understanding of fatigue failure mechanisms in laser-based additive manufacturing technologies.
Name | Description | Solicitation Number | FederalAgency | Type | PostedDate |
|---|---|---|---|---|---|
Very High Cycle Fatigue and Supplementary High Cycle Fatigue Testing of Additive Alloys | 80NSSC26924554Q | National Aeronautics and Space Administration Shared Services Center | Special Notice 1/1 | 2/5/26, 11:53 AM |
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| Not listed | Not listed | $349.8k | 2/10/26 |