Delivery Order SPE4A723D0293-SPE4A725F6264
Award Date
5/29/25
Potential Completion Date
12/26/25
Potential Value
$85K
Federal Agency
Aviation
Awardee
Sample Machining Inc.
Ultimate Awardee
Not listed
NAICS Category
332510 - Hardware Manufacturing
PSC Category
5365 - Bushings, Rings, Shims, And Spacers
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Full and Open Competition after exclusion of sources
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Dayton, OH 45403, USA
Solicitation Procedures
Negotiated Proposal / Quote
Number Of Offers Received
Not listed
Legislative Mandate
Walsh Healy Act
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
This is a federal contract award to Sample Machining Inc., doing business as Bitec, a for-profit manufacturer of precision machined components based in Dayton, Ohio. The contract, awarded by the Defense Logistics Agency (DLA) Aviation, is for the delivery of retention plate shims (NSN 8510334314) with a ceiling value of $290,750.50. The contract is a Firm Fixed Price Delivery Order with an ultimate completion date of October 24, 2025. This contract does not have a set-aside designation. Bitec...
This is a federal contract award to Sample Machining Inc., doing business as Bitec, a for-profit manufacturer of precision machined components based in Dayton, Ohio. The contract, awarded by the Defense Logistics Agency (DLA) Aviation, is for the delivery of shims, retention plates (SPE4A723D0293|SPE4A725F3728). The contract has a ceiling value of $117,181.00 and an ultimate completion date of September 19, 2025. It is a Firm Fixed Price Delivery Order contract, with no set-aside designation....
This federal contract award, valued at $90,965.00, was made by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a small business manufacturer based in Dayton, Ohio. The contract is for the delivery of retention plate shims, a specialized aerospace hardware component. The contract is a firm-fixed price purchase order with a total small business set-aside. It has an ultimate completion date of December 28, 2020. Bitec has a history of federal...
This is a federal contract award by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a small business manufacturer based in Dayton, Ohio. The $92,070.00 firm fixed-price purchase order is for the delivery of retention plate shims, a specialized aerospace component. The award is part of a larger single-award Indefinite Delivery Contract (IDC) that Bitec holds with DLA Aviation, valued at $2,348,967.90 through August 2028. This IDC, which is set...
This federal contract award was made by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a small business manufacturer based in Dayton, Ohio. The $152,544.25 firm-fixed-price purchase order is for the supply of retention plate shims, which are specialized aerospace hardware components. The contract has an ultimate completion date of May 5, 2025 and is not designated as a set-aside. Bitec is an experienced federal contractor, having been awarded an...
This is a firm-fixed-price purchase order contract awarded by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a small business manufacturer of precision machined components based in Dayton, Ohio. The contract, valued at $134,310.00, is for the supply of retention plate shims, a type of specialized aerospace hardware. The contract has a period of performance through May 20, 2016 and was competitively awarded without any set-aside designation. In...
This federal contract award, valued at $149,820.00, was issued by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a for-profit manufacturer of precision machined components based in Dayton, Ohio. The contract is for the delivery of retention plate shims, which are specialized aerospace hardware components. The contract does not have a set-aside designation, but Bitec has previously been awarded other federal contracts, including an Indefinite...
This federal contract award, SPE4A618P1549, was issued by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a small business manufacturer of precision machined components based in Dayton, Ohio. The contract is for the supply of retention plate shims, a specialized hardware item, with a ceiling value of $94,936.00 and a completion date of September 13, 2018. The contract was awarded on a firm fixed-price basis as a total small business set-aside. Bitec...
The U.S. Defense Logistics Agency (DLA) Aviation awarded a $143,750 firm-fixed-price purchase order to Sample Machining Inc., doing business as Bitec, for 1,250 retention plate shims. This contract was set aside for small business concerns. Sample Machining is a manufacturer of precision machined components based in Dayton, Ohio, that has previously delivered machined parts to DLA and NASA. The contract stems from a competitive solicitation for the specified retention plate shims, with an...
The Defense Logistics Agency (DLA) Aviation awarded a $137,500 firm fixed-price purchase order to Sample Machining Inc., doing business as Bitec, for the delivery of retention plate shims. This award is set aside for small businesses. Sample Machining is a manufacturer of precision machined components, including items like test specimens, quick release plungers, and brake arms, that it has previously supplied to NASA and DLA. The company also holds a NASA blanket purchase agreement for general...