Delivery Order SPE4A723D0293-SPE4A723F044A
Award Date
8/8/23
Potential Completion Date
3/26/25
Potential Value
$291K
Federal Agency
Aviation
Awardee
Sample Machining Inc.
Ultimate Awardee
Not listed
NAICS Category
332510 - Hardware Manufacturing
PSC Category
5365 - Bushings, Rings, Shims, And Spacers
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Full and Open Competition after exclusion of sources
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Dayton, OH 45403, USA
Solicitation Procedures
Negotiated Proposal / Quote
Number Of Offers Received
Not listed
Legislative Mandate
Walsh Healy Act
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
This is a federal contract award to Sample Machining Inc., doing business as Bitec, a for-profit manufacturer of precision machined components based in Dayton, Ohio. The contract, awarded by the Defense Logistics Agency (DLA) Aviation, is for the delivery of shims, retention plates (SPE4A723D0293|SPE4A725F3728). The contract has a ceiling value of $117,181.00 and an ultimate completion date of September 19, 2025. It is a Firm Fixed Price Delivery Order contract, with no set-aside designation....
This is a firm-fixed-price purchase order contract awarded by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a small business manufacturer of precision machined components based in Dayton, Ohio. The contract, valued at $134,310.00, is for the supply of retention plate shims, a type of specialized aerospace hardware. The contract has a period of performance through May 20, 2016 and was competitively awarded without any set-aside designation. In...
The U.S. Defense Logistics Agency (DLA) awarded a Firm Fixed Price delivery order contract to Sample Machining Inc., doing business as Bitec, for the provision of 8510711306 SHIM,RETENTION PLAT. The contract, valued at $73,481.50, has an ultimate completion date of January 22, 2025. Bitec, a small business manufacturer of precision machined components based in Dayton, Ohio, has been awarded this delivery order contract as part of a larger Indefinite Delivery Contract (IDC) with DLA Aviation,...
This is a federal contract award to Sample Machining Inc., doing business as Bitec, a for-profit manufacturer of precision machined components based in Dayton, Ohio. The contract, awarded by the Defense Logistics Agency (DLA) Aviation, is for the delivery of retention plate shims (NSN 8510334314) with a ceiling value of $290,750.50. The contract is a Firm Fixed Price Delivery Order with an ultimate completion date of October 24, 2025. This contract does not have a set-aside designation. Bitec...
This federal contract award, valued at $149,820.00, was issued by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a for-profit manufacturer of precision machined components based in Dayton, Ohio. The contract is for the delivery of retention plate shims, which are specialized aerospace hardware components. The contract does not have a set-aside designation, but Bitec has previously been awarded other federal contracts, including an Indefinite...
This federal contract award, SPE4A618P1549, was issued by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a small business manufacturer of precision machined components based in Dayton, Ohio. The contract is for the supply of retention plate shims, a specialized hardware item, with a ceiling value of $94,936.00 and a completion date of September 13, 2018. The contract was awarded on a firm fixed-price basis as a total small business set-aside. Bitec...
This federal contract award is for the production of SHIM,RETENTION PLAT, a specialized aerospace component, by Sample Machining Inc., doing business as Bitec. The $73,481.50 fixed-price delivery order was issued by the Defense Logistics Agency (DLA) Aviation, a defense agency under the Department of Defense. The contract has an ultimate completion date of November 1, 2024. Bitec, a small business manufacturer based in Dayton, Ohio, has a history of providing precision-engineered components to...
This federal contract award was issued by the Defense Logistics Agency (DLA) Aviation to Sample Machining Inc., doing business as Bitec, a manufacturing company located in Dayton, Ohio. The $143,000.00 firm fixed-price purchase order is for the delivery of retention plate shims, a small production hardware item, with an expected completion date of October 9, 2018. The contract was set aside for small business concerns. Sample Machining Inc. has previously performed work as both a prime...
The U.S. Defense Logistics Agency (DLA) Aviation awarded a $143,750 firm-fixed-price purchase order to Sample Machining Inc., doing business as Bitec, for 1,250 retention plate shims. This contract was set aside for small business concerns. Sample Machining is a manufacturer of precision machined components based in Dayton, Ohio, that has previously delivered machined parts to DLA and NASA. The contract stems from a competitive solicitation for the specified retention plate shims, with an...
The Defense Logistics Agency (DLA) Aviation awarded a $137,500 firm fixed-price purchase order to Sample Machining Inc., doing business as Bitec, for the delivery of retention plate shims. This award is set aside for small businesses. Sample Machining is a manufacturer of precision machined components, including items like test specimens, quick release plungers, and brake arms, that it has previously supplied to NASA and DLA. The company also holds a NASA blanket purchase agreement for general...