Vertical Turbine Pump
Closed State & local contract opportunity Posted
- Solicitation number
- PE-75553-NONST-2025-000000041
- State
- Georgia
- Responses due
Opportunity facts
- NIGP code
- Point of contact
-
- Neil Ridley nridley@dutil.com (706) 529-1310
Opportunity details come from ssl.doas.state.ga.us. Updated .
About this opportunity
The state of Georgia is seeking a direct replacement for a Sulzer Model JT-33CLC-1 Stage Vertical Turbine Pump, with a comprehensive procurement opportunity posted on July 2, 2025, and proposals due by July 9, 2025. The procurement requires a highly specialized vertical turbine pump with intricate specifications, including a cast iron bowl, Ni-Al bronze wear ring, 316SS bearings, and Al-Bronze impeller. The pump must feature a fabricated steel discharge head with specific dimensional requirements, including a 24.5" BD x 24" 150# discharge flange, and a 46" diameter base with additional tap configurations for air release valves and pressure gauges. Critical technical requirements include a 22'-11" flanged steel column assembly, 316SS line shaft with bronze or 316SS retainers, and NSF-61 approved coating on all ferrous surfaces. The pump components must precisely match the existing Sulzer model's specifications, with exacting material requirements for each assembly, including bowl, discharge head, motor stand, stuffing box, column assembly, and associated hardware.
While no specific set-aside designations or vendor restrictions are explicitly mentioned in the procurement documentation, the highly technical nature of the vertical turbine pump suggests that vendors must demonstrate extensive engineering expertise and precise manufacturing capabilities. The specialized requirements indicate that only manufacturers with specific experience in municipal water infrastructure and vertical turbine pump engineering are likely to be competitive. The procurement appears to be a replacement for an existing infrastructure component, suggesting potential integration with current water system technologies. Although no specific budget range is provided, the complexity of the specifications and the precision of material requirements imply a significant capital investment. Potential vendors will need to provide detailed technical documentation demonstrating exact compliance with the specified Sulzer model replacement, including material certifications, dimensional accuracy, and NSF-61 coating compliance.
Opportunity text
Must be a direct replacement for the following pump. Sulzer Model JT-33CLC-1 Stage Vertical Turbine Pump BOWL ASSEMBLY Bowl, Cast Iron Bowl Wear Ring, Ni-Al Bronze Suction Bell, Cast Iron Sand Collar, 316SS Bearings, Bronze [C89835 Federally III] Impeller, Al-Bronze Impeller Key,416SS Impeller Wear Ring, Al-Bronze Bowl Shaft, 316SS Basket Strainer, None Bolting, 316SS Coating (Ferrous Surfaces), NSF-61 Approved Coating DISCHARGE HEAD ASSEMBLY Type JTAF Fabricated Steel with a 24.5" BD x 24" 150# Discharge Flange x 46" Diameter base including a 1" NPS tap for an Air Release Valve, 1/4" NPS tap for a Bubbler Sensing Line and a 1/4' NPS tap for a pressure gauge. Bubbler, air release and pressure gauge to be provided by others. Motor Stand, Fabricated Steel Stuffing Box, Cast Iron with Non-asbestos packing Stuffing Box Shaft Sleeve, 304SS or 316SS Coupling, FB-4 - Product Detail Qty Unit Price Extended Price Drive Guard, Aluminum Bolting, 316SS Bearing, Rubber w/316SS Shell Soleplate, Steel 54" SQ x 36" ID x 1.75" THK Coating (Ferrous Surfaces), NSF 61 Approved ID/OD COLUMN ASSEMBLY Approximately 22'-11"' of 24" flanged steel column assembly with drop-in Bronze or 316SS retainers. Maximum column and line shaft length is 10 feet. Bearings, Cutlass Rubber with 'a Maximum 10' Spacing Line shaft, 316SS w/ 304SS or 316SS Shaft Sleeves Bolting, 316SS Coating (Ferrous Surfaces), NSF 61 Approved ID/OD
On GovTribe
Work this opportunity
- Track it in your pipeline
- Similar opportunities
- Ask GovTribe AI about this opportunity