TRD03 RFQ-Welding/Fabrication-Wbro Hdqrs-Wildlife Section-Ben Mazzei

The Massachusetts Division of Fisheries and Wildlife has issued a Request for Quotes (RFQ) for welding and fabrication services, specifically targeting two distinct fabrication projects. The first component requires the fabrication and installation of an aluminum box measuring approximately 35x15x10 inches, which must be mounted on a plastic water tank within a CanAm UTV bed. The second component involves the purchase and installation of metal running boards on a 2015 F250 single cab truck. This procurement opportunity is designated as TRD03 and requires precise metalwork and installation services for the agency's wildlife section. Interested vendors must complete all work no later than June 30, 2025, with the submission deadline set for February 5, 2025. Potential bidders are encouraged to direct any questions to Benjamin Mazzei via email at ben.mazzei@mass.gov or by telephone at 413-768-9090. The agency's main office is located at 1 Rabbit Hill Road, Westborough, MA 01581, which may serve as a reference point for potential site evaluations or project scoping.

The RFQ does not explicitly outline specific set-aside designations or restrictions for disadvantaged enterprises. No incumbent vendors or current contractors are mentioned in the documentation. The procurement appears to be open to qualified welding and fabrication service providers capable of meeting the precise specifications for the UTV and truck modifications. While the document does not specify a precise budget range or award value, the scope suggests a relatively modest project focusing on specialized metalwork and vehicle customization. The procurement is limited to the specified fabrication and installation tasks, with a clear expectation of professional-grade workmanship and precise adherence to the dimensional and mounting requirements outlined in the original request. Vendors should be prepared to demonstrate their technical capabilities in metal fabrication, specifically aluminum work and running board installation, with the ability to complete the project within the established timeline of June 30, 2025.