Safety Training Center Emergency Backup Generator
Open State & local contract opportunity Posted
- Solicitation number
- 4768
- State
- California
- Responses due
Opportunity facts
- Jurisdiction
- Point of contact
-
- Janean Hawney janean.hawney@carlsbadca.gov (760) 607-7965
Opportunity details come from constructionbidsource.com. Updated .
About this opportunity
San Diego County, California, is soliciting construction bids for an emergency backup generator installation at the Carlsbad Safety Training Center, with bids due December 17, 2026. The opportunity was posted November 18, 2026.
The contractor must furnish all equipment, labor, materials, tools, transportation, permits, and utilities needed to complete the work as specified in the referenced Construction Documents. Scope includes clearing and grubbing vegetation and topsoil; trenching and horizontal boring for main power feeders and control wiring from the main electrical panel to the pad site; forming and pouring a steel-reinforced raised concrete pad engineered for the generator's full wet weight; installing concrete-filled steel bollards around the pad perimeter; pulling and landing main power conductors, control cables, and remote monitoring lines; supplying a commercial-grade diesel emergency generator; coordinating freight delivery with crane and rigging offload; rigging, hoisting, and installing the generator; restoring turf, plants, irrigation, mulch, and hardscaping; and cleaning up the site.
The scope-of-work PDF attached to the opportunity is 37MB.
Opportunity text
The Work includes the provision of all equipment, labor, materials, tools, services, transportation, permits, utilities, and all other items necessary to complete the construction of the following, as specified and shown in the Construction Documents: 1. Clear and grub designated vegetation, brush, roots, and topsoil within the installation footprint and trenching pathways. 2. Excavate and trench conduits and horizontal bore for main power feeders and control wiring from the main electrical panel to the pad site. 3. Form, reinforce with steel rebar, and pour a raised concrete pad engineered to hold the full wet weight of the generator unit. 4. Install concrete-filled steel bollards surrounding the perimeter of the pad to prevent vehicle impact. 5. Pull and land main power conductors, control cables, and remote monitoring lines through conduit between the main panel and generator. 6. Supply and procure a commercial-grade diesel emergency generator. 7. Coordinate freight delivery to the Carlsbad Safety Training Center, including crane/rigging services to offload equipment into designated staging areas. 8. Rig, hoist, and install the generator onto the concrete pad 9. Replace damaged turf, plants, irrigation lines, mulch, and hardscaping disturbed during trenching or equipment access to match existing facility conditions. 10. Clean up all construction materials, tools, and debris to leave the Safety Training Center grounds clean and fully restored.
Files
| File | Type | Posted |
|---|---|---|
| Safety Training Center Emergency Backup Generator.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Similar opportunities
- Ask GovTribe AI about this opportunity