Repair and Resurface Two Tennis Courts into Four Pickleball Courts and Install New Net Systems

Jefferson Parish, Louisiana is requesting sealed bids to repair and resurface two tennis courts into four pickleball courts and install new net systems at 4229 Alabama Ave., Kenner, Louisiana, with bids due September 24, 2026 at 3:00 p.m. A Louisiana State Contractor's License in Building Construction or Painting, Coating, and Blasting classification is required.

The scope includes washing courts to identify low areas, filling approximately 1,000 linear feet of cracks with acrylic crack filler using 500 psi hydro washers, patching approximately 1,000 square feet of low spots with acrylic patch binder, cleaning and filling up to 250 linear feet of expansion joints with permeable rubber, applying one coat of surface epoxy primer and one coat of acrylic re-surfacer, applying two coats of color paint with sand content (colors to be selected by the parish), striping courts, and furnishing and installing new net post foundations, sleeves, and net post sets with Douglas Sports equipment or approved equal on each court. All materials and labor carry a one-year warranty from completion, or longer if the manufacturer provides extended coverage.

The successful bidder must commence work within 10 days of receiving the Notice to Proceed and complete all work within 60 consecutive calendar days. Work must be performed during normal business hours (7:00 a.m. to 5:00 p.m.) with five days' advance notice to the owner representative. A non-mandatory pre-bid conference and site inspection will be held September 10, 2026 at 10:00 a.m. at the project location; prospective bidders must contact Jarette Carmouche at Jarette.Carmouche@jeffparish.gov or 504-349-5000 to schedule site visits. Questions are due before the Q&A forum closes (opened August 26, 2026 at 9:30 a.m.). Bidders must submit corporate resolutions, bid affidavits, sealed bid signature pages, and proof of standard insurance requirements with proposals. Bidders are responsible for performing their own site measurements and quantity determinations.