Rehabilitate and Shift Taxiway A Phases 1 and 2 at Kissimmee Gateway Airport

Kissimmee Gateway Airport is soliciting sealed bids for rehabilitation and shift of Taxiway A Phases 1 and 2, with bids due June 2, 2026 at 2:00 p.m. local time at the Airport's office of the Director of Aviation, 401 Dyer Boulevard. DBE requirements have been temporarily suspended for this project. A non-mandatory site visit is scheduled for May 7, 2026 at 10:00 a.m. at the Airport Administration Building.

The scope extends the full length of Taxiway Alpha from Runway 15 North to the end of Runway 33 and includes correcting geometry problems at crossing taxiways to achieve required 90-degree centerline entrance to Runway 15–33 and offset correction from 350 feet to 400 feet per FAA standards. Work encompasses pavement demolition and milling, new asphalt and concrete surfaces, base and subbase installation, drainage structures, airfield marking and lighting, fencing, turfing, signage, and modifications to the Airfield Lighting Control System. The project is subject to FAA Airport Improvement Program funding (FAA AIP No. 3-12-0038-048-2025) and Florida Department of Transportation funding (FDOT FPN No. 457288-1).

Bidders must register through AVCON, INC. to be eligible. Each bid requires submission of one original and one hardcopy plus a digital copy on USB drive, CD, or DVD in a sealed envelope. Bids must be accompanied by a cashier's check or bid bond equal to five percent of the total bid price including all alternates. The successful contractor must provide performance and payment bonds each equal to at least the total bid price. Contractors and subcontractors must comply with E-Verify employment eligibility verification and Title VII anti-discrimination requirements. Bid questions are due May 26, 2026 at 5:00 p.m. Eastern; final addenda will be issued no later than May 28, 2026 at 5:00 p.m. Eastern. Award will be based on total bid price, though the owner reserves the right to award any combination of bid schedules and alternates or reject all bids. A general one-year warranty on workmanship and labor is required.