Inductive Loop Services in Los Angeles and Ventura Counties

The documents and files attached to this solicitation do not have any updates for digital accessibility at this time. Updates will be applied as soon as they are available. For an accessible version of solicitation documents published on this page, please submit a request at http://bit.ly/dpac-ada or call (916) 654-2852. Contractor agrees to provide all labor, tools, materials, equipment, vehicles, travel, work signs, traffic control and incidentals required to sawcut, repair and/or remove and install nonfunctioning inductive loop, stub out and Detector Lead-in Cable (DLC), including pull boxes, pull box covers and conduit to as built condition on an as needed basis. Bidder shall possess at the time of bid submittal and for the duration of the Agreement, a valid and current registration with the Department of Industrial Relations (DIR). Caltrans will verify bidder¿s DIR registration, it is not necessary to provide a copy. Bidder must have at time of bid submittal and for the duration of the contract, a valid, current Class A General Engineering license, OR a C13 Fencing Contractor license, OR a C32 Parking and Highway Improvement Contractor license issued by the California Contractors State Licensing Board (CSLB) for the guardrail work to be performed. If the Prime Contractor has a Class A General Engineering Contractor license, it may perform traffic control work. If Prime Contractor has a C13 Fencing Contractor license or a C32 Parking and Highway Improvement Contractor license, it must also have a C31 Construction Zone Traffic Control Contractor license. If traffic control work is subcontracted, the subcontractor shall have a valid C31 Construction Zone Traffic Control Contractor license issue by CSLB)