Full Truck Wrap Color Change 2024 Chevrolet Tahoe

Closed State & local contract opportunity Posted

Solicitation number
INF-2026-0366
State
Texas
Responses due

Opportunity facts

Jurisdiction
Point of contact

Opportunity details come from beaconbid.com. Updated .

About this opportunity

The City of Houston is seeking a vendor to wrap a 2024 Chevrolet Tahoe with a full exterior color change from black to blue, with proposals due September 9, 2026. Vendors must be located within 50 miles of the Houston-Sugarland-Baytown metropolitan statistical area and must complete all work directly without subcontracting to third parties.

The scope includes full vehicle inspection, removal of all noncovert police lighting (grill lights, bumper lights, rear hatch lights, mirror lights, and auxiliary LED modules), assessment of all mounting points for cosmetic or structural impact, and repair of holes, scratches, and surface imperfections resulting from light removal. The vehicle will then be fully wrapped in an approved blue shade with factory-grade finish quality and uniform coverage, followed by final quality inspection confirming successful removal and repair of all former police light mounting areas. No removal of existing wrap is required.

Three approved wrap colors are specified: KPMF K75441 Excelsior Blue Gloss Cast VWS IV, KPMF K75469 Blue Black Iridescent Gloss Cast VWS IV, and 3M Gloss Boat Blue (Series 2080). Any alternate colors must be approved by the requestor before installation.

Inquiries should be directed to ronald.laborde@houstontx.gov. The internal reference number is 10359865 P09.

Opportunity text

The City of Houston is seeking a vendor to wrap a 2024 Chevrolet Tahoe to change its exterior color from black to blue. The process begins with a full inspection of the vehicle's body and existing equipment. All non‑covert police lighting-including grill lights, bumper lights, rear hatch lights, mirror lights, and any auxiliary LED modules-will be carefully removed. Each mounting point will then be assessed for cosmetic or structural impact. Every part of the exterior that is painted black will be wrapped. Any holes, scratches, or surface imperfections left behind from light removal will be repaired. This includes filling and smoothing openings, correcting paint scuffs, and ensuring all affected areas are leveled and ready for wrap application. Once the body is properly prepared, the vehicle will be fully wrapped in the selected shade of blue, ensuring clean lines, proper adhesion, and a factory‑grade finish. After wrapping, the Tahoe will undergo a final quality check to confirm uniform coverage and the successful removal and repair of all former police‑light mounting areas. No removal of old wrap is needed.Vendors need to be located 50 miles of the Houston-Sugarland-Baytown metropolitan statistical area. Vendor will be responsible for service and will not contract out to a third party for completion.Approved colors to be used:KPMF K75441 Excelsior Blue Gloss Cast VWS IVKPMF K75469 Blue Black Iridescent Gloss Cast VWS IV3M Gloss Boat Blue (Series 2080)Alternate colors must be approved by requestor before installationInternal Reference #: 10359865 P09____________ ronald.laborde@houstontx.gov

Files

File Type Posted
scan_e172233_2026-09-01-10-52-39.pdf PDF
Informal General Terms.docx DOCX document

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for State & Local Contractors