WY NP portable aluminum MIG welder pack
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from , or the latest solicitation from .
- Solicitation number
- 140R6024Q0078
- Agency
-
Bureau of Reclamation
Department of the Interior
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333992 Welding and Soldering Equipment Manufacturing
- PSC
- 3431 Electric Arc Welding Equipment
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Bureau of Reclamation, Missouri Basin Region, is seeking to procure a multi-process welding pack through a Commercial Request for Quote (RFQ). The welding pack must meet specific technical requirements, including an input voltage of 460, 380/400/415, or 575, and an output range of 5-500A. The agency has set a deadline of June 14, 2024, for interested vendors to respond to the RFQ.
This procurement is set aside for small businesses only. No incumbent contractors are named, and the specific award value or budget range is not provided. The procurement is classified under the NAICS code 333992 - Welding and Soldering Equipment Manufacturing, and the PSC code 3431-P - Electric Arc Welding Equipment.
Notice text
The Bureau of Reclamation, Missouri Basin Region, intends to issue a Commercial Request for Quote (RFQ) for the following Brand Name or Equal supplies:
Specifications of Pack
1. Multi-Process Welder
A. Basic Specifications:
i. Input voltage: 460, 380/400/415, 575
ii. Input Current
a. 39/31/31
b. 33/27/27
iii. Input Phase: 3
iv. Output Range: 5-500A
v. Rated Output
a. 500A/40V/60%
b. 450A/38V/100%
vi. Net Weight: <150 lbs.
B. Processes
i. Stick (SMAW)
ii. Gouging (CAC-A)
iii. Flux-Cored (FCAW)
iv. TIG (GTAW)
v. Pulsed MIG (GMAW-P)
vi. Flux-Cored Self-Shielded (FCAW-S)
vii. Flux-Cored Gas-Shielded (FCAW-G)
C. Max Rating: 500A
D. Output Range by Mode: 5 – 500A
E. Communication Technology
i. Analog
ii. Digital
iii. CrossLinc
iv. ArcLink
F. Amphenol Pins
i. 5
ii. 14
iii. 12
G. Work Lead Connector Type: Lug
2. Drive Roll Kit 3/64 in. (1.2 mm) Aluminum Wire
3. Drive Roll Kit 1/16 in. (1.6 mm) Aluminum Wire
4. Work Lead
A. Work Lead Package
B. 15 ft 4/0 cable with lugged ends
C. Ground Clamp
5. Power Feed
A. Push-Pull Functionality
B. Internal Lighting
C. Internal Heating
D. Dual Procedure and Memory Button(s)
E. Compact Case Design
6. Fixed Conduit Gun: Push-Pull
7. Weld Power Cable
A. lug to lug
B. 3/0, 600A
C. 60% duty cycle
D. 10 ft
8. Pressure Compensated Flowmeter Regulator
A. Brass Body with neoprene diaphragm
B. Pressure compensated to 20 psig.
C. Flow-control up to 140 SCFH
D. Dual calibration onflow tube
E. Vertical mount
Required Performance Specifications
1. Delivery upon manufacturing completion- three (3) complete and operational Portable
Aluminum MIG Welder packs to the WYAO.
2. Deliver all certifications of acceptance that states Inspection Certifications and Testing
are completed and passed per Manufacturer’s specifications.
• Manufacturer’s specifications must meet all applicable OSHA and NFPA regulations.
The delivery location is: Bureau of Reclamation, located at 205 Chamberlain Road, Mills WY, 82644. FOB Destination of all supplies with an anticipated delivery date of November 1, 2024.
It is anticipated the simplified acquisition set aside will be a Total Small Business.
It is intended the Request for Quote (RFQ) will be posted on or about 14 June 2024 via the SAM.gov website.
It is incumbent upon contractors to monitor the SAM.gov web page for RFQ release and all subsequent amendments.
The product service code is 3431 and the NAICS code is 333992.
HARD COPIES OF THE SOLICITATION WILL NOT BE ISSUED. Quotations are not
requested and will not be accepted from this Pre-Solicitation Notice.
It is required all companies are to be actively registered in SAM.gov prior to submitting a quotation for this solicitation.
For further information or questions regarding this solicitation, please contact Chris Zook by e-mail at czook@usbr.gov.
Notice history
| Notice | Type | Posted |
|---|---|---|
| WY NP portable aluminum MIG welder pack | Award Notice | |
| WY NP portable aluminum MIG welder pack | Solicitation | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Rod, welding | Naval Supply Systems Command | No set-aside | |
| Welding qualification | Construction and Equipment | Total Small Business | |
| Welding qualification | Construction and Equipment | Total Small Business | |
| Industrial Resistance Spot Welder | Technical Center | No set-aside | |
| Welding qualification | Construction and Equipment | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity