Wide Belt Sander 37 inch
Cancelled Solicitation Posted
- Solicitation number
- W911S225U1798
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333243 Sawmill, Woodworking, and Paper Machinery Manufacturing
- PSC
- 3220 Woodworking Machines
- Place of performance
- Training Support Center - Tamika Craig5251 Smiley Court, Bldg 3020Fort Benning, GA 31905 31905
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum is procuring a 37-inch wide belt sander with specific technical requirements including a 20HP 3-phase motor system, centralized controls, and variable speed feed capabilities. The solicitation seeks equipment with digital readout controls for precise thickness measurement, an air-eye oscillation system for the 37-inch x 7-inch sanding belt, and a three-motor configuration with pneumatic sensor controls and safety disc brake for emergency stopping. Key specifications include maximum board thickness of 6 inches, minimum board length of 12 inches, dust collection requirements of 1,600 CFM minimum, and motor voltage options of 230/460V with prewired 230V configuration. The equipment must include a 5-year warranty and have delivery capability within 30 days or less including shipping. The solicitation was posted on August 27, 2025, with responses due by September 3, 2025.
This procurement opportunity is designated as a Total Small Business set-aside, restricting competition to qualified small business entities. The contract falls under NAICS code 333243 for Sawmill, Woodworking, and Paper Machinery Manufacturing and PSC code 3220 for Woodworking Machines. Performance will take place at Fort Moore, Georgia 31905, indicating the equipment will be delivered and potentially installed at this military installation. The solicitation specifies equipment with a gross weight of 2,200 pounds and net weight of 2,090 pounds, requiring specialized handling and installation considerations. No incumbent contractors or specific award values are identified in the solicitation notice, and the procurement appears to be for a single unit based on the detailed specifications provided.
Notice text
2 versions
Update #2 · Latest ·
Reason for update is to add combined synopsis solicitation document. Wide Belt Sander WB-37 Part Number: WB-37 or Equal 37 inch Wide Belt Sander 20HP 3-Phase with centralized controls, variable speed feed belt to accurately dial in the exact feed speed, digital readout control to display the exact thickness of both the starting and finished piece or preset of finished piece thickness, air-eye system which controls the oscillation for the 37 inch x 7 inch sanding belt. Contains pneumatic sensor system controls and three motor system. The first motor system allows for maximum horsepower to feed the drive drums. A second, smaller motor directly powers the VS feed belt and a third, smaller motor, powers the feed table up and down to the desired thickness automatically. Contains a safety disc brake, which slows the machine quickly and stops it instantly in the event of an emergency. Stock Number 1790837 or Equal; Air Required: 75-80; Dust Collection Minimum CFM Required (CFM): 1,600; Dust Port Outside Diameter: 5 inches; Feed Motor Power: 1HP; Maximum Board Thickness: 6 inches; Maximum Board Width:37 inches; Minimum Board Length: 12 inches; Minimum Board Thickness: 1/8 inch; Model Number: WB-37 or Equal; Motor Phase: 3; Motor Power: 20HP; Motor Voltage: 230/460V; Prewired Voltage: 230V; Recommended Circuit Size: 70/35 AMP; Sanding Belt Speed: 2,625 FPM; Style (Type): Wide Belt Sander; Warranty: 5 Year; Gross Weight: 2200.0; Net weight: 2090.0. Includes shipping with a lead time of 30 days or less.
Update #1 ·
Wide Belt Sander WB-37 Part Number: WB-37 or Equal 37 inch Wide Belt Sander 20HP 3-Phase with centralized controls, variable speed feed belt to accurately dial in the exact feed speed, digital readout control to display the exact thickness of both the starting and finished piece or preset of finished piece thickness, air-eye system which controls the oscillation for the 37 inch x 7 inch sanding belt. Contains pneumatic sensor system controls and three motor system. The first motor system allows for maximum horsepower to feed the drive drums. A second, smaller motor directly powers the VS feed belt and a third, smaller motor, powers the feed table up and down to the desired thickness automatically. Contains a safety disc brake, which slows the machine quickly and stops it instantly in the event of an emergency. Stock Number 1790837 or Equal; Air Required: 75-80; Dust Collection Minimum CFM Required (CFM): 1,600; Dust Port Outside Diameter: 5 inches; Feed Motor Power: 1HP; Maximum Board Thickness: 6 inches; Maximum Board Width:37 inches; Minimum Board Length: 12 inches; Minimum Board Thickness: 1/8 inch; Model Number: WB-37 or Equal; Motor Phase: 3; Motor Power: 20HP; Motor Voltage: 230/460V; Prewired Voltage: 230V; Recommended Circuit Size: 70/35 AMP; Sanding Belt Speed: 2,625 FPM; Style (Type): Wide Belt Sander; Warranty: 5 Year; Gross Weight: 2200.0; Net weight: 2090.0. Includes shipping with a lead time of 30 days or less.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Circular Saw | MICC Fort Drum | Total Small Business | |
| Deburring Machine | MICC Fort Drum | Total Small Business | |
| FS5 Analyzer | MICC Fort Drum | No set-aside | |
| Hardware | MICC Fort Drum | Total Small Business | |
| Rota-rack | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity