WHEEL ASSEMBY, PNEUMATIC -Updated
Closed Pre-Solicitation Posted
- Solicitation number
- SPRDL126R0122
- Agency
-
Land and Maritime
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 326211 Tire Manufacturing (except Retreading)
- Place of performance
- Warren, Michigan, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Land and Maritime intends to solicit a three-year requirements-type contract for Wheel Assembly, Pneumatic (NSN 2530-01-500-4619) with solicitation release anticipated for 9 November 2026. The technical data package (TDP) contains purchased-parts restrictions; offers must conform to the government TDP. Qualification testing and evaluation are required to become an approved source; source approval provides the opportunity to compete on future solicitations but does not guarantee award.
Minimum guaranteed contract quantity is 675 units over three years; maximum is unlimited. Part number is 12378510-005/19207. Packaging is military/B with special packaging instructions; inspection and acceptance at origin; FOB destination. The solicitation will remain open for 30 days following release and will be available on SAM.gov.
Vendors seeking approved-source status must meet Level 3 PPAP and/or CFAT requirements. The procurement applies DLAD provision 52.215-9023 (Reverse Auction), which permits reverse-auction pricing. If a reverse auction is held post-close, contractor representatives must register in the reverse-auction system and complete on-line reverse-auction training prior to participation. Registration and training details are available at https://dla.procurexinc.com. Prospective offerors should consult the Source Approval Request Package Requirements at https://tacom.army.mil/ombudsman/source-approval-request.
Notice text
4 versions
Update #4 · Latest ·
PRE-SOLICITATION:
This procurement will be for a 3-YEAR Requirements-type, long-term contract.
The technical data package (TDP) has purchased-parts restrictions; Offers must meet the requirements of the Government TDP.
***NOTE: The TDP distribution statement requires corrections to post and are underway by Engineering with an anticipated TDP correct date of November 8th.***
Item Name: Wheel Assembly, Pneumatic
NSN: 2530-01-500-4619
MIN GUARANTEED CONTRACT QTY: 675 EA
MAX 3-YR QTY: unlimited
Part No: 12378510-005/19207
Packaging: Military/B with Special Packaging Instructions
INSP/ACCP: Origin/Origin
FOB: Destination
Technical Data will be available for this procurement.
Solicitation release will be approximately 09 November 2026 (Due to TDP corrections required as of 24August) and will be open for offers for 30 days. See the solicitation for closing date. Once available, the solicitation can be downloaded from SAM.gov.
EDIT: For vendors who wish to become an additional approved source of supply, this item has a Level 3 PPAP and / or CFAT or Other Special Requirement.
- Qualification testing and evaluation IS required to become an approved source.
- Source approval does NOT guarantee business.
- Qualifying as an approved source ONLY provides the opportunity to compete on future solicitations.
Additional Information:
*Source Approval Program: https://tacom.army.mil/ombudsman
*Source Approval Program – What is it?: https://tacom.army.mil/ombudsman/sap
*Source Approval Request (SAR) Package Requirements: https://tacom.army.mil/ombudsman/source-approval-request
REVERSE AUCTION: The solicitation will contain DLAD provision 52.215-9023, Reverse Auction, which allows for the use of a reverse auction as a pricing technique. After the solicitation closes, the contracting officer will determine if a reverse auction will be held. If a reverse auction is held, contractors must be registered in the reverse auction system in order to participate in the auction. Additionally, the contractor representative participating in the auction must have taken the on-line reverse auction training prior to the auction. Registration, on-line training, and other information regarding the reverse auction can be found at https://dla.procurexinc.com. Any questions related to the reverse auction system or process can be directed to the Contract Specialist.
Update #3 ·
PRE-SOLICITATION:
This procurement will be for a 3-YEAR Requirements-type, long-term contract.
The technical data package (TDP) has purchased-parts restrictions; Offers must meet the requirements of the Government TDP.
***NOTE: The TDP requires corrections to post and are underway by Engineering with an anticipated TDP correct date of November 8th.***
Item Name: Wheel Assembly, Pneumatic
NSN: 2530-01-500-4619
MIN GUARANTEED CONTRACT QTY: 675 EA
MAX 3-YR QTY: unlimited
Part No: 12378510-005/19207
Packaging: M/B
INSP/ACCP: Origin/Origin
FOB: Destination
Technical Data will be available for this procurement.
Solicitation release will be approximately 09 November 2026 (Due to TDP corrections required as of 24August) and will be open for offers for 30 days. See the solicitation for closing date. Once available, the solicitation can be downloaded from SAM.gov.
EDIT: For vendors who wish to become an additional approved source of supply, this item has a Level 3 PPAP and / or CFAT or Other Special Requirement.
- Qualification testing and evaluation IS required to become an approved source.
- Source approval does NOT guarantee business.
- Qualifying as an approved source ONLY provides the opportunity to compete on future solicitations.
Additional Information:
*Source Approval Program: https://tacom.army.mil/ombudsman
*Source Approval Program – What is it?: https://tacom.army.mil/ombudsman/sap
*Source Approval Request (SAR) Package Requirements: https://tacom.army.mil/ombudsman/source-approval-request
REVERSE AUCTION: The solicitation will contain DLAD provision 52.215-9023, Reverse Auction, which allows for the use of a reverse auction as a pricing technique. After the solicitation closes, the contracting officer will determine if a reverse auction will be held. If a reverse auction is held, contractors must be registered in the reverse auction system in order to participate in the auction. Additionally, the contractor representative participating in the auction must have taken the on-line reverse auction training prior to the auction. Registration, on-line training, and other information regarding the reverse auction can be found at https://dla.procurexinc.com. Any questions related to the reverse auction system or process can be directed to the Contract Specialist.
Update #2 ·
PRE-SOLICITATION:
This procurement will be for a 3-YEAR Requirements-type, long-term contract.
The technical data package (TDP) has purchased-parts restrictions; Offers must meet the requirements of the Government TDP.
***NOTE: The TDP requires corrections to post and are underway by Engineering with an anticipated TDP correct date of November 9th.***
Item Name: Wheel Assembly, Pneumatic
NSN: 2530-01-500-4619
MIN 3-YR QTY: 675 EA
MAX 3-YR QTY: unlimited
Part No: 12378510-005/19207
Packaging: M/B
INSP/ACCP: Origin/Origin
FOB: Destination
Technical Data will be available for this procurement.
Solicitation release will be approximately 09 November 2026 (Due to TDP corrections required as of 24August) and will be open for offers for 30 days. See the solicitation for closing date. Once available, the solicitation can be downloaded from SAM.gov.
EDIT: For vendors who wish to become an additional approved source of supply, this item has a Level 3 PPAP and / or CFAT or Other Special Requirement.
- Qualification testing and evaluation IS required to become an approved source.
- Source approval does NOT guarantee business.
- Qualifying as an approved source ONLY provides the opportunity to compete on future solicitations.
Additional Information:
*Source Approval Program: https://tacom.army.mil/ombudsman
*Source Approval Program – What is it?: https://tacom.army.mil/ombudsman/sap
*Source Approval Request (SAR) Package Requirements: https://tacom.army.mil/ombudsman/source-approval-request
REVERSE AUCTION: The solicitation will contain DLAD provision 52.215-9023, Reverse Auction, which allows for the use of a reverse auction as a pricing technique. After the solicitation closes, the contracting officer will determine if a reverse auction will be held. If a reverse auction is held, contractors must be registered in the reverse auction system in order to participate in the auction. Additionally, the contractor representative participating in the auction must have taken the on-line reverse auction training prior to the auction. Registration, on-line training, and other information regarding the reverse auction can be found at https://dla.procurexinc.com. Any questions related to the reverse auction system or process can be directed to the Contract Specialist.
Update #1 ·
PRE-SOLICITATION:
This procurement will be for a 3-YEAR Requirements-type, long-term contract.
The technical data package (TDP) has purchased-parts restrictions; Offers must meet the requirements of the Government TDP.
Item Name: Wheel Assembly, Pneumatic
NSN: 2530-01-500-4619
MIN 3-YR QTY: 675 EA
MAX 3-YR QTY: unlimited
Part No: 12378510-005/19207
Packaging: M/B
INSP/ACCP: Origin/Origin
FOB: Destination
Technical Data will be available for this procurement.
Solicitation release will be approximately 07 August 2026 and will be open for offers for 30 days. See the solicitation for closing date. Once available, the solicitation can be downloaded from SAM.gov.
EDIT: For vendors who wish to become an additional approved source of supply, this item has a Level 3 PPAP and / or CFAT or Other Special Requirement.
- Qualification testing and evaluation IS required to become an approved source.
- Source approval does NOT guarantee business.
- Qualifying as an approved source ONLY provides the opportunity to compete on future solicitations.
Additional Information:
*Source Approval Program: https://tacom.army.mil/ombudsman
*Source Approval Program – What is it?: https://tacom.army.mil/ombudsman/sap
*Source Approval Request (SAR) Package Requirements: https://tacom.army.mil/ombudsman/source-approval-request
REVERSE AUCTION: The solicitation will contain DLAD provision 52.215-9023, Reverse Auction, which allows for the use of a reverse auction as a pricing technique. After the solicitation closes, the contracting officer will determine if a reverse auction will be held. If a reverse auction is held, contractors must be registered in the reverse auction system in order to participate in the auction. Additionally, the contractor representative participating in the auction must have taken the on-line reverse auction training prior to the auction. Registration, on-line training, and other information regarding the reverse auction can be found at https://dla.procurexinc.com. Any questions related to the reverse auction system or process can be directed to the Contract Specialist.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Wheel assembly, pneumat | Land and Maritime | No set-aside | |
| Tire and wheel assy | Land and Maritime | No set-aside | |
| Cylinder assembly | Land and Maritime | Total Small Business | |
| Valve, pneumatic tire | Land and Maritime | No set-aside | |
| Wheel half assembly, AI | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity