Welder package
Closed Solicitation Posted
- Solicitation number
- W911S226U2450
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333992 Welding and Soldering Equipment Manufacturing
- PSC
- 3438 Miscellaneous Welding Equipment
- Place of performance
- 1 C Tree Rd Bldg 1041 Mcalester Ok 74501 74501
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command at Fort Drum is soliciting proposals for a comprehensive MIG Welder Package to be delivered to McAlester, Oklahoma. The procurement requires a complete welding system capable of performing five distinct welding processes: Shielded Metal Arc Welding (SMAW), Direct Current Gas Tungsten Arc Welding (DC GTAW), Gas Metal Arc Welding (GMAW), Pulse Gas Metal Arc Welding (GMAW-P), and Flux Core Arc Welding (FCAW). Key technical requirements include a power supply with a minimum 100% duty cycle at 36 volts/400 amps, compatibility with 480-volt three-phase power, compliance with all applicable OSHA standards, and a dual wire feeder system with specified drive roll kits and wire guides in .035, .045, and .062 sizes. The system must also include two MIG gun assemblies with 15-foot minimum lengths, wireless and wired foot controllers, gas flow meter regulators, and an integrated cooler. All components listed in the specification section must be accounted for in offerors' proposals for consideration. The solicitation was posted on January 15, 2026, with proposals due by January 22, 2026, providing a one-week response window.
This opportunity is designated as a Total Small Business set-aside, restricting competition to qualified small business concerns. No incumbent contractor or award value has been identified in the solicitation materials. The place of performance is specified as Building 1041, 1 C Tree Road in McAlester, Oklahoma. The procurement falls under NAICS code 333992 (Welding and Soldering Equipment Manufacturing) and PSC code 3438 (Miscellaneous Welding Equipment). While specific quantity and timeline information is not detailed in the provided excerpt, the comprehensive nature of the specifications and the requirement to include items such as spool covers, drive roll kits, and multiple feeder components suggests this is a significant equipment procurement intended to establish a capable welding system for military operations.
Notice text
MIG WELDER PACKAGE 3) General RequirementsThis section provides the specification requirements for the Welding Machine Package. Note: Every item listed in this section shall be accounted for in the offeror?s proposal for it to be considered (see section 6.).a) System shall meet all applicable OSHA standards and regulations.b) Vendor Shall ensure All Components of the system are compatible. c) Power supply shall have a minimum duty cycle of 100% at 36volts/400 amps.d) Machine Shall be compatible with 480-volt 3 phase power.e) System Shall be able to do the following processes,1. Shielded Metal Arc Welding (SMAW)2. Direct Current Gas Tungsten Arc Welding (DC GTAW)a. High Frequency Startb. Lift Arc3. Gas Metal Arc Welding (GMAW)4. Pulse Gas Metal Arc Welding (GMAW-P)5. Flux Core Arc Welding (FCAW)f) The wire feeder shall be a dual wire setup.1. The Wire feeder shall have a minimum duty cycle of 100% at 100 volts/600 amps.2. The Wire feeder Shall include spool covers for 33lb wire spools.3. The Wire feeder Shall include 2, 15ft (min) 300amp Mig gun assemblies.4. The Wire feeder Shall be compatible with ?Miller style? power pins on the Mig gun assemblies.5. Wire feeder control cable and weld power cable Shall be included.6. 25 ft work sense lead shall be included.7. Vendor Shall include Feeder drive roll kits of the following sizes (Dual size reversable are acceptable).a. .035 V-Grooveb. .045 V-Groovec. .062 V-Groove8. Vendor Shall include Wire Guides of the following sizes.a. .035b. .045c. .062g) System Shall include a wireless remote foot controller.1. Wireless foot control Shall accept ?AA? size batteries.2. Vendor Shall provide batteries to fill the controller not less than 2 times.h) System Shall include a heavy-duty foot control pedal with 20ft of cord.i) System Shall Include 2 Sheild Gas Flow meter regulators.j) System Shall include 2 gas hoses (4ft min).k) Machine must include a cooler.1. Cooler must be removeable for service/repair.l) Machine must have dedicated Tig Torch Connection.m) Machine must have dedicated Tig Gas hose Connection.n) Machine must have dedicated Tig Remote Connection.o) Machine must have dedicated Stick Connection.p) Machine must have dedicated Work cable Connection.q) Running Gear/Cart Shall be included.1. 2 brackets to stow the foot controls Shall be included.r) 25 ft(min) Work Lead Shall be included.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Boiler, Feedwater tank, Pump skid | MICC Fort Drum | Total Small Business | |
| Service Repair for Sciaky Spot Welder | Air Force Sustainment Center | No set-aside | |
| Draft Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services | ACC Aberdeen Proving Ground | Total Small Business | |
| Swivel shackle assembly | MICC Fort Drum | Total Small Business | |
| NG SEW-electrical components | ACC Rock Island | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity