Virginia Class Propulsor - Most Aggressive Feature (MAF)
Closed Pre-Solicitation Posted
Not the latest version. See the latest solicitation from .
- Solicitation number
- N00167-20-R-0007
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- PSC
- 2010 Ship And Boat Propulsion Components
Notice details come from SAM.gov. Updated .
About this opportunity
This Request for Information solicits proposals to develop and manufacture Virginia Class propulsor most aggressive feature components for the Naval Sea Systems Command. Contractors will be required to provide engineering support services including material specification development, design review, and repair procedures. Respondents must also develop manufacturing and quality plans to produce up to seven propulsor components and three shipping fixtures over four years. Proposals are due by February 21, 2020 and the Navy intends to award a hybrid firm fixed price and cost-plus-fixed-fee contract by June 1, 2021.
There is no set-aside designated for this procurement. The predominate NAICS code is 333512 and PSC code is J019. Respondents must hold a CONFIDENTIAL facility security clearance to access classified documents and industrial work areas as required. Proposals should include typical timeframes for delivery and installation, which may range from one to four years depending on component. The value of this contract action is currently undetermined but will include the development, manufacture and delivery of propulsor components and associated engineering support services over multiple years.
Notice text
2 versions
Update #2 · Latest ·
N00167-20-R-0007 - Request For Information: Virginia Class Propulsor Most Aggressive Feature (MAF)
1. This is not a Request for Proposal (RFP) and an award of a contract will not be made as a result of this posting. The Naval Surface Warfare Center, Carderock Division is hereby issuing a Request for Information (RFI) from all potential sources to provide information regarding the below requirement:
Reference Title Dwg No.
(a) (CONFIDENTIAL) PMAF Interface Control Drawing UTAS Dwg 000-00008161-000
(b) (CONFIDENTIAL) Rotor Type HYDEM Assembly NAVSEA Drawing 245-8328551
(c) (CONFIDENTIAL) PMAF Shipping Fixture Assembly UTAS Drawing 173-00008161-000
Material Specification Development
The Contractor shall develop and deliver a performance specification for the material utilized in the VIRGINIA Class Propulsor MAF, defined in reference (a). The specification shall include all material properties and specifications, including target values for tolerances and frequencies.
Engineering Support Services
The contractor shall perform engineering services in support of Hybrid Multi-Material (HMM) propulsor cost reduction tasking, review and design change incorporation, design and drawing creation or other engineering design-related tasking.
Installation and Maintenance Support Services
The contractor shall perform installation and maintenance support services on VIRGINIA Class Propulsor (HMM) and composite hardware. The contractor shall provide support to the Navy to install the component in reference (a) into the assembly shown in reference (b). The contractor shall develop procedures for the repair of all components in reference (a) due to potential damage incurred during at-sea operation. The contractor shall obtain NAVSEA approval for these procedures, and execute repair procedures. These procedures will be executed in the installed condition in dry dock when feasible, or with the component uninstalled from the submarine and in a shipyard or industrial environment.
Manufacturing Plan
The contractor will be required to develop a manufacturing plan to address the following items:
- Manufacturing processes/procedures
- Versalink Casting Process/Procedure
- Surface Preparation Process/Procedure
- Part movement and subcontractor processes/plans
Quality Management and Quality Assurance Plan
The Contractor will be required to maintain a certified Quality Management System in accordance with the requirements of ISO 9001:2015.
The contractor will be required develop a Quality Assurance Plan to address how the contractor shall test and inspect material delivered under this contract. The Quality Assurance Plan shall adhere to the requirements of the certified Quality Management System.
VIRGINIA Class Propulsor MAF
The Contractor shall manufacture a maximum of seven (7) MAFs within a 4 year contractual period of performance in accordance with reference (a). Each MAF will be manufactured in accordance with an approved Manufacturing Plan and inspected and tested in accordance with the approved Quality Assurance Plan prior to delivery. Installation fasteners, including all bolts, studs, bushings, multi-jack fasteners, and fairing caps as shown on reference (b) shall be procured and shall be kitted and crated separately.
Manufacture and Deliver Shipping and Installation Fixture (SIF)
The Contractor shall manufacture a maximum of three (3) SIFs within a 4 year contractual period of performance in accordance with reference (c). Each SIF will be manufactured in accordance with the approved Manufacturing Plan and inspected and tested in accordance the approved Quality Assurance Plan prior to delivery.
Security
The work requires access to classified documents and industrial work areas. The contractor personnel will be required to hold CONFIDENTIAL clearances and the contractor will be required to have a CONFIDENTIAL Facility Security Clearance.
Government Purpose Rights
The Government requires purpose rights. The Government wants to obtain purpose rights from technical data that is developed and produced throughout the duration of this contract and from any follow-on contract. Provide details of any limitation on technical data rights for the specific proprietary information that would not be shared with the Government.
IMPORTANT NOTE:
IF INTERESTED, PLEASE SUBMIT YOUR COMPANY’S NAME, ADDRESS THE CLASSIFIED DRAWINGS CAN BE MAILED TO, CAGE, and DUNS TO THE CONTRACT SPECIALIST AND CONTRACTING OFFICER BELOW. AFTER THE GOVERNMENT VERIFIES THE SECURITY CLEARANCE OF THE COMPANY, IT WILL MAIL THE DRAWINGS TO THE ADDRESS PROVIDED. AFTER SUBMITTING A RESPONSE TO THIS REQUEST, ALL INTERESTED PARTIES MUST DESTROY THE CONFIDENTIAL DRAWINGS LISTED AS REFERENCES (a, b, and c) IN ACCORDANCE WITH GOVERNMENT APPROVED PROCESSES FOR DESTRUCTION OF CONFIDENTIAL AND PROPRIETARY INFORMATION.
2. NSWCCD intends to fulfill this requirement via a hybrid Firm Fixed Price and Cost-Plus-Fixed-Fee Completion Type contract with an anticipated award date of 01 JUN 21.
Vendors are requested to provide the following information pertaining to their supply/service:
- Company name, address, phone number, primary points of contact(s), email address, business size (large/small), and CAGE CODE
- Capabilities that can meet the requirements above
- Typical delivery and/or installation time frames for the above requirements
- Any barriers that would not allow a proposal submission
3. Contracting Office Address:
Naval Surface Warfare Center
Carderock Division
9500 MacArthur Boulevard
BLDG 42, West Bethesda, MD 20817-5700
Questions may be submitted to:
Jordan Good Abeer Ameer
Contracting Specialist Branch Head
jordan.s.good@navy.mil abeer.ameer@navy.mil
301-227-3603 301-227-4047
Update #1 ·
N00167-20-R-0007 - Request For Information: Virginia Class Propulsor Most Aggressive Feature (MAF)
1. This is not a Request for Proposal (RFP) and an award of a contract will not be made as a result of this posting. The Naval Surface Warfare Center, Carderock Division is hereby issuing a Request for Information (RFI) from all potential sources to provide information regarding the below requirement:
Reference Title Dwg No.
(a) (CONFIDENTIAL) PMAF Interface Control Drawing UTAS Dwg 000-00008161-000
(b) (CONFIDENTIAL) Rotor Type HYDEM Assembly NAVSEA Drawing 245-8328551
(c) (CONFIDENTIAL) PMAF Shipping Fixture Assembly UTAS Drawing 173-00008161-000
Material Specification Development
The Contractor shall develop and deliver a performance specification for the material utilized in the VIRGINIA Class Propulsor MAF, defined in reference (a). The specification shall include all material properties and specifications, including target values for tolerances and frequencies.
Engineering Support Services
The contractor shall perform engineering services in support of Hybrid Multi-Material (HMM) propulsor cost reduction tasking, review and design change incorporation, design and drawing creation or other engineering design-related tasking.
Installation and Maintenance Support Services
The contractor shall perform installation and maintenance support services on VIRGINIA Class Propulsor (HMM) and composite hardware. The contractor shall provide support to the Navy to install the component in reference (a) into the assembly shown in reference (b). The contractor shall develop procedures for the repair of all components in reference (a) due to potential damage incurred during at-sea operation. The contractor shall obtain NAVSEA approval for these procedures, and execute repair procedures. These procedures will be executed in the installed condition in dry dock when feasible, or with the component uninstalled from the submarine and in a shipyard or industrial environment.
Manufacturing Plan
The contractor will be required to develop a manufacturing plan to address the following items:
- Manufacturing processes/procedures
- Versalink Casting Process/Procedure
- Surface Preparation Process/Procedure
- Part movement and subcontractor processes/plans
Quality Management and Quality Assurance Plan
The Contractor will be required to maintain a certified Quality Management System in accordance with the requirements of ISO 9001:2015.
The contractor will be required develop a Quality Assurance Plan to address how the contractor shall test and inspect material delivered under this contract. The Quality Assurance Plan shall adhere to the requirements of the certified Quality Management System.
VIRGINIA Class Propulsor MAF
The Contractor shall manufacture a maximum of seven (7) MAFs within a 4 year contractual period of performance in accordance with reference (a). Each MAF will be manufactured in accordance with an approved Manufacturing Plan and inspected and tested in accordance with the approved Quality Assurance Plan prior to delivery. Installation fasteners, including all bolts, studs, bushings, multi-jack fasteners, and fairing caps as shown on reference (b) shall be procured and shall be kitted and crated separately.
Manufacture and Deliver Shipping and Installation Fixture (SIF)
The Contractor shall manufacture a maximum of three (3) SIFs within a 4 year contractual period of performance in accordance with reference (c). Each SIF will be manufactured in accordance with the approved Manufacturing Plan and inspected and tested in accordance the approved Quality Assurance Plan prior to delivery.
Security
The work requires access to classified documents and industrial work areas. The contractor personnel will be required to hold CONFIDENTIAL clearances and the contractor will be required to have a CONFIDENTIAL Facility Security Clearance.
Government Purpose Rights
The Government requires purpose rights. The Government wants to obtain purpose rights from technical data that is developed and produced throughout the duration of this contract and from any follow-on contract. Provide details of any limitation on technical data rights for the specific proprietary information that would not be shared with the Government.
IMPORTANT NOTE:
AFTER SUBMITTING A RESPONSE TO THIS REQUEST, ALL INTERESTED PARTIES MUST DESTROY THE CONFIDENTIAL DRAWINGS LISTED AS REFERENCES (a, b, and c) IN ACCORDANCE WITH GOVERNMENT APPROVED PROCESSES FOR DESTRUCTION OF CONFIDENTIAL AND PROPRIETARY INFORMATION.
2. NSWCCD intends to fulfill this requirement via a hybrid Firm Fixed Price and Cost-Plus-Fixed-Fee Completion Type contract with an anticipated award date of 01 JUN 21.
Vendors are requested to provide the following information pertaining to their supply/service:
- Company name, address, phone number, primary points of contact(s), email address, business size (large/small), and CAGE CODE
- Capabilities that can meet the requirements above
- Typical delivery and/or installation time frames for the above requirements
- Any barriers that would not allow a proposal submission
3. Contracting Office Address:
Naval Surface Warfare Center
Carderock Division
9500 MacArthur Boulevard
BLDG 42, West Bethesda, MD 20817-5700
Questions may be submitted to:
Jordan Good Abeer Ameer
Contracting Specialist Branch Head
jordan.s.good@navy.mil abeer.ameer@navy.mil
301-227-3603 301-227-4047
Files
| File | Type | Posted |
|---|---|---|
| Request For Information (RFI) Virginia Class Propulsor Most Aggressive Feature (MAF).docx | DOCX document |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Synopsis - Virginia Class Propulsor Most Aggressive Feature | Solicitation | |
| Justification and Approval for sole source: Virginia Class Propulsor Most Aggressive Feature | Limited / Sole Source Justification | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| N0016727RPDMS: Propulsor Design and Manufacturing Support | Naval Sea Systems Command | No set-aside | |
| Propl gear reduce | Naval Supply Systems Command | No set-aside | |
| SOLE SOURCE RFP to Bird-Johnson Propeller Company** Navy Propulsor and Propellers | Naval Sea Systems Command | No set-aside | |
| Medium Landing Ship (LSM) Block 1 Post-Delivery | — | No set-aside | |
| Cap | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity