Valve, Regulating, System Pressure

Closed Pre-Solicitation Posted

This opportunity was awarded. See the award notice from .

Solicitation number
SPE7MX-19-R-0121
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

NAICS code
332911 Industrial Valve Manufacturing
PSC
Not on record

Notice details come from SAM.gov. Updated .

Notice text

National Stock Number (NSN): 4820-01-374-4732
Item Name: Valve, Regulating, System Pressure
Destination Information: Various DLA Stocking Locations
AMC/AMSC Code: 3C*
NAICS Code: 332911 - Industrial Valve Manufacturing

*****************************************************************************************************************************


NOTE: THIS IS A CRITICAL SAFETY ITEM (CSI). DEFINITION: PARTS FAILURE POTENTIAL CAN CAUSE LOSS OF LIFE AND/OR SERIOUS INJURY.


*****************************************************************************************************************************


This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Freight on Board (FOB) and Inspection/Acceptance will be at Origin. The proposed procurement will be a Long Term Contract (LTC). The duration of the contract will be for a total of five (5) years, consisting of three (3) base years, and two (2) option years. The option years may be exercised at the discretion of the Government. The Government-required delivery is 250 days. The Product Item Description (PID), Packaging and Marking information for this NSN can be found at the bottom of this document.


Based upon market research, the Government is using the policies contained in FAR Part 15 - Contracting by Negotiation - in its solicitation for the described supplies or services.


This will be solicited as Unrestricted. The solicitation will be posted to the DLA Internet Bid Board System (DIBBS) at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about October 9, 2019. Specifications, plans or drawings are not available.


RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 9 (Offer Due Date/Local Time) on Page 1 of Standard Form (SF) 33 (Request for Proposal). All responsible HUBZone sources may submit an offer/proposal, which shall be considered.


While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, as described in the solicitation.


One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.


* AMSC C. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.



CM17363002 Product Item Description (PID), Packaging and Marking
-
*** LTC PID Packaging Consolidated Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION
AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.


CLIN 0001: NSN: 4820-01-374-4732


VALVE, REGULATING, SYSTEM PRESSURE


USED ON OXYGEN CONCENTRATOR FOR
THE F/A-18 HORNET AIRCRAFT.


LIFE SUPPORT EQUIPMENT.


REFERENCE NUMBER:RC001


REFERENCE NUMBER:RP001


REFERENCE NUMBER:RA001


REFERENCE NUMBER:RQ001


REFERENCE NUMBER:RQ002


REFERENCE NUMBER:RQ009


REFERENCE NUMBER:RQ011


REFERENCE NUMBER:ZM008


REFERENCE NUMBER:Q0037


REFERENCE NUMBER:ZQA03


CRITICAL APPLICATION ITEM


Carleton Life Support Systems Inc. 99251 P/N 1647701-1



PREP FOR DELIVERY


LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS


PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
QUP:001 PRES MTHD:31 CLNG/DRY:Z PRESV MAT:00
WRAP MAT:JV CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements


PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008


IN ADDITION TO THE MANDATORY MIL-STD-129P MARKINGS,
REFERENCE NUMBER:CS284


*************************************************************************************


GLOSSARY


*************************************************************************************
PACKAGING TEXT


THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
ITEM DESCRIPTION TEXT



REFERENCE NUMBER RC001


RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)


REFERENCE NUMBER RP001


RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT


REFERENCE NUMBER RA001


RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:


http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx


FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.


REFERENCE NUMBER RQ001


RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
NON-MANUFACTURERS)




REFERENCE NUMBER RQ002


RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)


REFERENCE NUMBER RQ009


RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN


REFERENCE NUMBER RQ011


RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES


REFERENCE NUMBER ZM008


If this NSN provides Contract Data Requirement Lists (CDRLs) as part of
the Technical Data Package, the line items from this solicitation are
not to be separately priced. Offerors must factor into the end item
unit price all costs associated with the preparation and delivery of the
data deliverables in the contract.


REFERENCE NUMBER Q0037


CLAUSE 52.246-15, CERTIFICATE OF CONFORMANCE,
IS NOT AUTHORIZED FOR THIS NSN UNLESS APPROVED
BY THE ESA.


REFERENCE NUMBER ZQA03


THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
(CSI).


ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
FORWARDED TO THE DSC CONTRACTING OFFICER FOR
REVIEW AND APPROVAL.
.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL
BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
CAGE CODE AND PART NUMBER.


REFERENCE NUMBER CS284


EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,
CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE
CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.


.

Notice history

Notice Type Posted
Valve, regulating, SY Award Award Notice
This notice Latest pre-solicitation Pre-Solicitation
Valve, Regulating, System Pressure Original Pre-Solicitation

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors