Valve, regulating, SY

Open Solicitation Posted

Solicitation number
N0010427QLA31
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Notice details come from SAM.gov. Updated .

About this opportunity

The Department of the Navy's Naval Supply Systems Command seeks repair of regulating valves under a full-and-open solicitation (Set Aside: No Set-Aside Used), with proposals due December 2, 2026. The RFQ is issued under Emergency Acquisition Flexibilities, and any award will be issued bilaterally, requiring the contractor's written acceptance before execution. The opportunity is coded NAICS 332919, Other Metal Valve and Pipe Fitting Manufacturing, and PSC 4820, Valves, Nonpowered.

The Government requires a 90-day Repair Turnaround Time and Government Source Inspection (GSI). Accelerated delivery is encouraged and accepted before the delivery dates listed in the schedule. All freight is FOB Origin and handled by Navy CAV or Proxy CAV per NAVSUPWSSFA24 or NAVSUPWSSFA25. Offerors must verify nomenclature, part number, and NSN before responding.

The solicitation includes a Notice of Cybersecurity Maturity Model Certification Level Requirements (NOV 2025), Buy American-Free Trade Agreements-Balance of Payments Program clauses, a Small Business Subcontracting Plan (DoD Contracts) clause, and a Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use. Joseph D. Weaver, GLE, is the point of contact at (771) 229-1473 or JOSEPH.D.WEAVER22.CIV@US.NAVY.MIL.

Notice text

CONTACT INFORMATION|4|N713.26|GLE|(771) 229-1473|JOSEPH.D.WEAVER22.CIV@US.NAVY.MIL|

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19||||||||||||||||||||

INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2|||

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|COMBO INVOICE & RECEIVING||TBD|N00104|TBD|TBD|SEE SCHEDULE|TBD|||TBD||||||

NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS|

MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1||

BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11||||||||||||

NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025))|1||

SMALL BUSINESS SUBCONTRACTING PLAN (DOD CONTRACTS)-BASIC (DEV 2026-O0037)(JUL 2026))|2|||

CONTRACTOR PURCHASING SYSTEM ADMINISTRATION-BASIC (DEV 2026-O0015)(JUL 2026)|1||

SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7||||||||

BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5||||||

BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1||

ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13||||||||||||||

NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X|

This solicitation is issued pursuant to Emergency Acquisition Flexibilities (EAF).

Accelerated delivery is encouraged and accepted before the delivery date(s) listed in the schedule. ^^

All freight is FOB Origin.

This RFQ is for repair. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. Verify nomenclature, part number, and NSN prior to responding.

The Government is seeking a Repair Turnaround Time (RTAT) of: 90 Days

Government Source Inspection (GSI) is required.

Please note freight is handled by Navy CAV or Proxy CAV as stated in NAVSUPWSSFA24 or NAVSUPWSSFA25.

Your quote should include the following information:

QUOTE AMOUNT AND RTAT

Check one: Firm-fixed-Price ___ Estimated ___ NTE ___

Unit Price:__________ Total Price:__________

Repair Turnaround Time (RTAT): _______ days

If your company is not quoting the Government's Required Repair Turnaround Time (RTAT) or earlier, provide your company's capacity constraints?

_________________________________________________________________

_________________________________________________________________

_________________________________________________________________

Repair Turnaround Time (RTAT): the resultant contractual delivery requirement is measured from asset Return to the date of asset acceptance under the terms of the contract. For purposes of this section, Return is defined as physical receipt of the F-condition

asset at the contractor's facility as reflected in the Action Date entry in the Commercial Asset Visibility (CAV) system. In accordance with the CAV Statement of Work, the contractor is required to accurately report all transactions by the end of the fifth

regular business day after receipt and the Action Date entered in CAV must be dated to reflect the actual date of physical receipt. The Contractor must obtain final inspection and acceptance by the Government for all assets within the RTATs established in this

contract.

Return Material Authorization # (RMA), if applicable:__________

Delivery Vehicle (if Delivery Order requested) (if your company has a current BOA/IDIQ, for example) :__________________

TESTING AND EVALUATION IF BEYOND REPAIR

T&E fee/price (if asset is determined BR/BER): If an item is determined BR, and the contractor provides documentation that costs were incurred during evaluation and determination of BR, the contracting officer will negotiate a reduced contract price, not-to

exceed (NTE) $___________associated with the repair effort to reflect the BR status of the equipment.

The T&E fee (if asset is determined BR/BER) was determined/computed based on:______________________________________.

AWARDEE INFO & PERFORMANCE LOCATION

Awardee CAGE: __________

Inspection & Acceptance CAGE, if not same as ""awardee CAGE"": __________

Facility/Subcontractor CAGE (where the asset should be shipped), if not same as ""awardee CAGE"":__________

IOT COMPARE REPAIR PRICE TO PRICE TO BUY NEW

New unit price:__________

New unit delivery lead-time:__________

IMPORTANT NOTE: Any asset for which the contractor does not meet the required RTAT will incur a price reduction per unit/per month the contractor is late - any delay determined to be excusable (e.g. Government Delay) will not result in a price reduction. If a

price reduction is required due to unexcusable contractor delay, the Contracting Officer will implement the aforementioned price reduction via a ""reconciliation modification"" at the end of the contract performance. Price reductions made pursuant to this section

shall not limit other remedies available to the Government for failure to meet required RTATs, including but not limited to the Government's right to terminate for default.

In reference to the above important note, the contractor provides the following price reduction amount per unit per month the contractor does not meet the RTAT: $__________, up to a maximum of: $_________.

\

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the VALVE,REGULATING,SY .

2. APPLICABLE DOCUMENTS

DOCUMENT REF DATA=MIL-STD-130 | | |K |000115|A| | |

DOCUMENT REF DATA=MIL-DTL-15024 | | |F |971128|A| | |

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The VALVE,REGULATING,SY repaired under this contract/purchase order shall meet the operational and functional requirements as represented by the Cage Code(s) and reference number(s) listed below. All repair work shall

be performed in accordance with the contractors repair/overhaul standard practices, manuals and directives including but not limited to drawings, technical orders, manufacturing operations, tooling instructions, approved repair standards and any other

contractor or government approved documents developed to provide technical repair procedures.

CAGE___Ref. No.

;86184 68549-01;

3.2 Marking - This assembly and its piece parts shall be physically identified in accordance with MIL-STD-130.

3.3 Component Identification Description (CID) - When applicable drawing(s) and/or specification(s) specify that a nameplate or identification plate is required, the CID number shall be added to the plate. The CID number will be furnished after approval of

the Provisioning Technical Documentation (PTD). When no plate is specified, an identification plate in accordance with MIL-DTL-15024, Type "C" on brass or Type "H" on aluminum shall be securely attached to each assembly showing the above CID number. No

assembly shall be shipped without the CID number attached. The solvent-resistance test per para 4.3.1.3 of MIL-DTL-15024 is not required.

3.3.1 ;CID 882242398 applies.;

3.4 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and

approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the

substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government

evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements:

Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number.

Code 2: Assembly (or set or kit) not furnished - Used following detail parts.

Code 3: Part not furnished separately - Use assembly.

Code 4: Part redesigned - Old and new parts are completely interchangeable.

Code 5: Part redesigned - New part replaces old. Old part cannot replace new.

Code 6: Part redesigned - Parts not interchangeable.

3.5 Additive Manufacturing-

If/When Additive Manufacturing election taken by vendor, to maintain visibilityover Additively Manufactured components within the supply chain, Contract Data Requirements List (CDRL) DD1423 reporting mechanisms apply.

DD1423 requirements invoke Certification/Data Report, Process and Material Traceability to be submitted electronically to the NAVSUP HQ AM mailbox and WAWF; as described on 1423.

DCMA QAR shall verify complete Master Traceability Ledger is compiled, accurate, and electronically transmitted to the NAVSUPHQAM and WAWF prior to signing the DD 250 / WAWF receiving report. See 1423.

4. QUALITY ASSURANCE

4.1 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any

inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance

does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.2 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies.

5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

6. NOTES - NOT APPLICABLE

DATE OF FIRST SUBMISSION=ASREQ

Paragraphs 10.1, 10.2, 10.2.1, 10.2.2, 10.2.4 and 10.5 of DI-MISC-80678 apply.

0. APPLICABILITY TRIGGER: If Additive Manufacturing (AM) methods, processes, or components are invoked, utilized, or delivered in the execution of this contract, this CDRL is active, mandatory, and fully applies.

1. COMPONENT TRACEABILITY LEDGER MANDATE: The contractor shall compile and maintain a Master Component Traceability Ledger. For every shipped part, the ledger shall map the unique AM component to its complete manufacturing genealogy, including but not limited to:

a. Manufacturing Process Travelers: Documenting the specific build platform run number, machine identifier, parameter settings, and operator stamps.

b. Feedstock & Material Origin: Linking the physical part being utilized for AM to the specific raw material heat number, powder or alloy lot number, and blending/reuse records.

2. SUBMISSION OF MASTER TRACEABILITY LEDGER: The completed Master Traceability Ledger and all associated manufacturing/quality records shall be submitted electronically to the NAVSUP HQ AM mailbox and WAWF:

2.1 Electronic Submission via Email:

a. Target Address: NAVSUP HQ AM mailbox - NAVSUPHQAMTeam@us.navy.mil or as designated by the Contracting Officer .

b. Naming Convention: The email subject line and compressed file name shall utilize the following standard format: " Contract Number - National Stock Number - Part Number Traceability Pkg (CDRL AXXX)".

c. Format & Security: All documents must be compiled into a single, secure, password-protected PDF or ZIP archive. Files exceeding 15MB shall be transmitted via DoD SAFE (Secure Access File Exchange) with notification sent to the NAVSUP HQ AM mailbox.

2.2 WAWF Receiving Report:

a. Attachment Requirement: The contractor shall upload the complete Master Traceability Ledger and associated records directly into the electronic WAWF utilizing the "Add Attachment" function.

Block 7: Source Inspection and Source Acceptance (SS) required. DCMA QAR shall verify that the complete Master Traceability Ledger is compiled, accurate, and electronically transmitted to the NAVSUPHQAM and WAWF prior to signing the DD 250 / WAWF receiving

report.

Block 10: ONE/R (One time and subsequent revisions).

Block 12: First submission to the NAVSUP HQ AM mailbox, DCMA QAR, and PCO must occur within five (5) business days of DCMA QAR on-site validation and prior to physical packaging and shipping of the production lot.

Block 13: Subsequent submission required if any element of the traceability chain (process travelers, inspection metrology, or material feedstock pedigree) is revised, updated, or amended post-approval.

Similar open opportunities

Opportunity Agency Set-aside Responses due
Valve, regulating, FL NAICS 332919 Naval Supply Systems Command No set-aside
Valve, MOT OP NAICS 332919 Naval Supply Systems Command No set-aside
Valve, globe NAICS 332919 Naval Supply Systems Command No set-aside
Valve, regulating, FL NAICS 332919 Naval Supply Systems Command No set-aside
Valve, regulating, FL, in repair/modification of NAICS 332919 Naval Supply Systems Command No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors