USDA Fruit Fly Eclosion and Release Facility, Moore Air Base Edinburg, TX

This solicitation is for construction of a new Eclosion and Release module to support USDA Preventative Release Program. The facility will be a one-story structure, totaling approximately 30,000 Sq. ft that will include parking and two new aircraft staging canopies near the existing airport runway. The project is to be delivered via design-bid-build delivery method and is a total Small Business Set-Aside. Proposals will be evaluated using the best-value trade-off selection process. Amendment 0001: The purpose of this amendment is: a. clarify the site visit date is April 2023 at 1000 Central; b. incorporate stamped drawings; c. extend suspense date for proposals to 24 April 2023.Amendment 0002: The purpose of this amendment is: a. updated Attachment 4 Past Performance Assessment Questionnaire; b. incorporate stamped drawings; c. extend suspense date for proposals to 28 April 2023. Amendment 0003: The purpose of this amendment is: a. extend suspense date for proposals to 5 May 2023; b. revise the site visit information in 00 21 00; make revisions to 00 21 11. See SF30 for more information. The purpose of this Amendment 0004 is to cancel the solicitation. The Contracting Officer does not have a reasonable expectation of receiving proposals from two or more responsible SBs within the requirements for the project and has determined in is in the best interests of the Government to cancel this solicitation and reprocure under an Unrestricted strategy. The new solicitation will include a SB participation plan/subcontracting plan requirement and SBs will still be eligible to compete as prime contractors.

This solicitation is for construction of a new Eclosion and Release module to support USDA Preventative Release Program. The facility will be a one-story structure, totaling approximately 30,000 Sq. ft that will include parking and two new aircraft staging canopies near the existing airport runway. The project is to be delivered via design-bid-build delivery method and is a total Small Business Set-Aside. Proposals will be evaluated using the best-value trade-off selection process. Amendment 0001: The purpose of this amendment is: a. clarify the site visit date is April 2023 at 1000 Central; b. incorporate stamped drawings; c. extend suspense date for proposals to 24 April 2023.Amendment 0002: The purpose of this amendment is: a. updated Attachment 4 Past Performance Assessment Questionnaire; b. incorporate stamped drawings; c. extend suspense date for proposals to 28 April 2023. Amendment 0003: The purpose of this amendment is: a. extend suspense date for proposals to 5 May 2023; b. revise the site visit information in 00 21 00; make revisions to 00 21 11. See SF30 for more information.

Please disregard the Word version Attachment 4 in Amendment 0003 on PIEE. Offerors may use the Word doc attached in SAM instead titled Attachment 4 Past Performance Assessment Worksheet Amendment 0003(2) or the PDF from PIEE.

This solicitation is for construction of a new Eclosion and Release module to support USDA Preventative Release Program. The facility will be a one-story structure, totaling approximately 30,000 Sq. ft that will include parking and two new aircraft staging canopies near the existing airport runway. The project is to be delivered via design-bid-build delivery method and is a total Small Business Set-Aside. Proposals will be evaluated using the best-value trade-off selection process.

Amendment 0001: The purpose of this amendment is:a. clarify the site visit date is April 2023 at 1000 Central;b. incorporate stamped drawings;c. extend suspense date for proposals to 24 April 2023.All other terms or conditions remain the same.

Amendment 0002: The purpose of this amendment is: a. incorporate stamped drawings; b. update Attachment 4- Past Performance Assessment Worksheet; and c. extend suspense date for proposals to 28 April 2023.

Site Visit Information:

USDA Moore Air Base (MAB)
22675 N. Moorefield Road
Edinburg, Texas 78541

There is an ACP where visitors will be required to show their valid ID. The guards will point you to the meeting location (conference room or hangar). The address above does not lead visitors to the point of entry. Visitors will need to drive an extra mile or so before reaching the road to the entry gate. GPS coordinates are 26.386778, -98.328556.
 

This solicitation is for construction of a new Eclosion and Release module to support USDA Preventative Release Program. The facility will be a one-story structure, totaling approximately 30,000 Sq. ft that will include parking and two new aircraft staging canopies near the existing airport runway. The project is to be delivered via design-bid-build delivery method and is a total Small Business Set-Aside. Proposals will be evaluated using the best-value trade-off selection process.

Amendment 0001: The purpose of this amendment is:a. clarify the site visit date is April 2023 at 1000 Central;b. incorporate stamped drawings;c. extend suspense date for proposals to 24 April 2023.All other terms or conditions remain the same.

Amendment 0002: The purpose of this amendment is: a. incorporate stamped drawings; b. update Attachment 4- Past Performance Assessment Worksheet; and c. extend suspense date for proposals to 28 April 2023.

This solicitation is for construction of a new Eclosion and Release module to support USDA Preventative Release Program. The facility will be a one-story structure, totaling approximately 30,000 Sq. ft that will include parking and two new aircraft staging canopies near the existing airport runway. The project is to be delivered via design-bid-build delivery method and is a total Small Business Set-Aside. Proposals will be evaluated using the best-value trade-off selection process.Amendment 0001: The purpose of this amendment is:a. clarify the site visit date is April 2023 at 1000 Central;b. incorporate stamped drawings;c. extend suspense date for proposals to 24 April 2023.All other terms or conditions remain the same.

This solicitation is for construction of a new Eclosion and Release module to support USDA Preventative Release Program. The facility will be a one-story structure, totaling approximately 30,000 Sq. ft that will include parking and two new aircraft staging canopies near the existing airport runway. The project is to be delivered via design-bid-build delivery method and is a total Small Business Set-Aside. Proposals will be evaluated using the best-value trade-off selection process.

22 Mar 2023: There are conflicting dates in the posted solicitation regarding the site visit. The site visit will be held on 4 April 2023. This will be clarified in a forthcoming amendment. I apologize for the inconvenience. Interested parties must RSVP to Donald Sumner at donald.c.sumner@usace.army.mil NLT 31 March 2023 at 1700 Central with full name, firm name, drivers license number(s). All visitors will need a valid ID to enter the base.

A forthcoming amendment will also incorporate updated drawings and extend the suspense date for proposals.

This solicitation is for construction of a new Eclosion and Release module to support USDA Preventative Release Program. The facility will be a one-story structure, totaling approximately 30,000 Sq. ft that will include parking and two new aircraft staging canopies near the existing airport runway. The project is to be delivered via design-bid-build delivery method and is a total Small Business Set-Aside. Proposals will be evaluated using the best-value trade-off selection process.

22 Mar 2023: There are conflicting dates in the posted solicitation regarding the site visit. The site visit will be held on 28 March 2023 at 1000 Central Time. Interested parties must RSVP to Donald Sumner at donald.c.sumner@usace.army.mil
NTL 23 March 2023 at 1700 Central. A forthcoming amendment will incorporate updated drawings.

This solicitation is for construction of a new Eclosion and Release module to support USDA Preventative Release Program. The facility will be a one-story structure, totaling approximately 30,000 Sq. ft that will include parking and two new aircraft staging canopies near the existing airport runway. The project is to be delivered via design-bid-build delivery method and is a total Small Business Set-Aside. Proposals will be evaluated using the best-value trade-off selection process.